13 October 2017 in IEEE Transactions on Antennas and Propagation
Switchable low-profile broadband frequency rasorber/ absorber based on slot arrays is presented and investigated. First, an equivalent circuit model is proposed to synthesize a rasorber with the transmission window within the absorption band. Based on the slot arrays, simple design guidelines for rasorber design are further developed. Low-profile broadband rasorber and high-selectivity rasorber are, respectively, designed and analyzed to verify the design strategies. Moreover, by loading the switching diodes, a switchable rasorber/absorber is proposed and analyzed, which exhibits small insertion loss at the transmission window and a bandwidth around 100% while the thickness is less than 10% of the free-space wavelength at the lowest operating frequency. Moreover, one extension of dual-polarized rasorber is also designed and analyzed to further validate the design strategy. For demonstration, the rasorber prototypes are fabricated and measured, good agreement between the simulation and measured results is observed.
21 December 2018 in IEEE Transactions on Antennas and Propagation
A novel filtering method based on metasurface antenna (MSA) with radiation nulls is proposed without loading extra circuits. Due to specific multi-unit structure of the MSA, the filtering method is firstly realized on each radiating metasurface (MS) unit by introducing a multi-folded U-shaped slot and a defected ground structure (DGS) to generate lower-edge radiation nulls. Meanwhile, co-planar parasitic patches are loaded around the MS units to provide upper-edge nulls and simultaneously introduce extra in-band resonances for wide passband. Thus, a low-profile, wideband and high-gain filtering antenna is readily constructed. To verify the concept, a prototype with a low profile of only 0.04 λ0 is designed and fabricated. The simulated and measured results agree well, demonstrating good performance with large impedance bandwidth of about 20%, high average gain of 8 dBi, and high aperture efficiency of about 90%, together with high out-of-band suppression levels of about 20 dB. In addition, the radiation patterns are symmetric in both E- and H-planes with cross-polarization suppressions of over 20 dB. Compared with the reported filtering antennas, the proposed filtering MSA (FMSA) can achieve wideband filtering response in a low profile, as well as high gain with high aperture efficiency.
19 June 2019 in IEEE Transactions on Antennas and Propagation
4 March 2019 in IEEE Transactions on Antennas and Propagation
26 July 2019 in IEEE Transactions on Antennas and Propagation
A novel compact differential-fed dual-polarized filtering patch antenna is proposed. Specific filtering response with radiation nulls is firstly realized for the dual-polarized antenna element by symmetrically loading defected ground structures (DGS), a cross slot and eight shorting pins without extra circuits. The DGS with pins can generate a lower-edge radiation null for a sharp roll-off rate, and simultaneously introduce extra in-band resonance for wide passband. Meanwhile, the cross slot with pins can offer an upper-edge null and an in-band resonance. Combing with inherent higher-order-mode null of the patch itself, the skirt selectivity and stopband suppression at upper band can be significantly improved. Meanwhile, the |Sdd11| at the upper and lower stopbands is close to 0 dB to achieve high stopband suppressions. As a result, a compact high-gain dual-polarized filtering patch antenna is readily constructed. Thanks for complete symmetry of above structures, the proposed method is very suitable for dual-polarized antennas, where all the performance for both polarizations are identical. For demonstration, a prototype of the proposed antenna is fabricated and measured. Good agreements between the measured and simulated results are observed, indicating good performance with a large bandwidth about 23and a peak gain up to 8.9 dBi within the passband, as well as out-of-band suppression levels of more than 20 dB. Compared with other reported filtering antennas, the proposed filtering patch antenna not only exhibits good wideband dual-polarization radiation, but also features high gain in a compact structure for very high aperture efficiency, and ultra-low cross-polarization level due to the differential feeding and complete symmetry.
20 April 2018 in IEEE Antennas and Wireless Propagation Letters
Low-profile dual-polarization frequency selective rasorbers with very simple structures are investigated. Based on an equivalent circuit model, the operating principle and design method are firstly studied. One rasorber using lossy cross-frame elements and double-square loops is then proposed, which exhibits two absorption bands at the two sides of one passband. Moreover, rasorbers with reduced cell size are further developed to stabilize the angular response. Under normal incidence, an insertion loss of about 0.26 dB is obtained at 4.25 GHz, the fractional bandwidth for reflection less than -10 dB is over 100%, and the thickness is around 0.1 μL. For demonstration, the rasorber prototypes were fabricated and measured, while reasonable agreements are observed accordingly.