13 October 2017 in IEEE Transactions on Antennas and Propagation
Switchable low-profile broadband frequency rasorber/ absorber based on slot arrays is presented and investigated. First, an equivalent circuit model is proposed to synthesize a rasorber with the transmission window within the absorption band. Based on the slot arrays, simple design guidelines for rasorber design are further developed. Low-profile broadband rasorber and high-selectivity rasorber are, respectively, designed and analyzed to verify the design strategies. Moreover, by loading the switching diodes, a switchable rasorber/absorber is proposed and analyzed, which exhibits small insertion loss at the transmission window and a bandwidth around 100% while the thickness is less than 10% of the free-space wavelength at the lowest operating frequency. Moreover, one extension of dual-polarized rasorber is also designed and analyzed to further validate the design strategy. For demonstration, the rasorber prototypes are fabricated and measured, good agreement between the simulation and measured results is observed.
5 October 2010 in Optics Express
This paper shows that customised broadband absorption of electromagnetic waves having arbitrary polarisation is possible by use of lossy cut–wire (CW) metamaterials. These useful features are confirmed by numerical simulations in which different lengths of CW pairs are combined as one periodic metamaterial unit and placed near to a perfect electric conductor (PEC). So far metamaterial absorbers have exhibited some interesting features, which are not available from conventional absorbers, e.g. straightforward adjustment of electromagnetic properties and size reduction. The paper shows how with proper design a broad range of absorber characteristics may be obtained.
6 February 2023 in Nature Communications
Wireless communications and sensing have notably advanced thanks to the recent developments in both software and hardware. Although various modulation schemes have been proposed to efficiently use the limited frequency resources by exploiting several degrees of freedom, antenna performance is essentially governed by frequency only. Here, we present an antenna design concept based on metasurfaces to manipulate antenna performances in response to the time width of electromagnetic pulses. We numerically and experimentally show that by using a proper set of spatially arranged metasurfaces loaded with lumped circuits, ordinary omnidirectional antennas can be reconfigured by the incident pulse width to exhibit directional characteristics varying over hundreds of milliseconds or billions of cycles, far beyond conventional performance. We demonstrate that the proposed concept can be applied for sensing, selective reception under simultaneous incidence and mutual communications as the first step to expand existing frequency resources based on pulse width.
7 September 2017 in IEEE Transactions on Magnetics
This paper presents a hybrid method based on the transmission line modeling method (TLM) aiming to represent the soil ionization effect for grounding systems simulation. This natural phenomenon can be better represented by taking into account the variation of the conductive components present in the TLM circuit and considering the residual resistivity remaining in the soil. The proposed analytical formulation is developed with a focus on the computational implementation of the method. The model is validated by comparing synthetized test results with measured data and other numerical models (residual resistivity, TLM, and analytical model). High precision together with an easy to implement formulation indicates that the methodology presents potential for real-life applications.
1 January 2006 in Synthesis Lectures on Computational Electromagnetics
This book presents the topic in electromagnetics known as Transmission-Line Modeling or Matrix method-TLM. While it is written for engineering students at graduate and advanced undergraduate levels, it is also highly suitable for specialists in computational electromagnetics working in industry, who wish to become familiar with the topic. The main method of implementation of TLM is via the time-domain differential equations, however, this can also be via the frequency-domain differential equations. The emphasis in this book is on the time-domain TLM. Physical concepts are emphasized here before embarking onto mathematical development in order to provide simple, straightforward suggestions for the development of models that can then be readily programmed for further computations. Sections with strong mathematical flavors have been included where there are clear methodological advantages forming the basis for developing practical modeling tools. The book can be read at different depths depending on...