Ases Akas Mishra

Ases Akas Mishra

Auto-generated profile, based on publicly available information

Ases Akas Mishra

Chalmers University of Technology, Department of Industrial and Materials Science Göteborg Sweden

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2021 in Progress in Additive Manufacturing
Verified
Journal Article
Open access
PDF file
AMAses Akas Mishra
Ases Akas Mishra
AMAffaf Momin
Affaf Momin
MSMatteo Strano
Matteo Strano
KRKedarnath Rane
Kedarnath Rane
Fused Filament Fabrication (FFF) is an Additive Manufacturing (AM) process that builds up a part via layer by layer deposition of polymeric material. The purpose of this study is to implement viscosity and density models for improving the assessment of melt flow behavior inside the nozzle during deposition. Numerical simulations are carried out for different combinations of important process parameters like extrusion velocity Ve, extrusion temperature Te, and filament material (Acrylonitrile Butadiene Styrene (ABS) and Polylactic Acid (PLA)). Cross-Williams–Landel–Ferry (Cross-WLF) viscosity and Pressure–Volume–Temperature (PVT) density models are incorporated to get realistic results. Distribution of printing parameters like pressure, temperature, velocity and viscosity inside the nozzle are observed at steady state and their relationship with the print quality is discussed. Effect of the PVT model on polymer deposition is illustrated by comparing it with deposition considering a constant density. Velocity profiles are obtained for the different cases considered and locations where the flow is fully developed, along the axial distance of the nozzle, are determined and termed as stable zones. A direct correlation between the position of the developed melt flow profile and printing quality is established and the best combination of printing parameters is proposed for ABS and PLA. Extended stable zones are obtained for the polymer melt in the nozzle at Ve = 60 mm/s, Te = 220 °C for ABS and Ve = 30 mm/s and Te = 195 °C for PLA and hence, these can be considered as the optimum values of the printing parameters.

23 December 2024 in Advanced Science
Verified
Journal Article
Open access
VGViney Ghai
Viney Ghai
AMAses Akas Mishra
Ases Akas Mishra
EHEnling Huang
Enling Huang
RNRoselle Ngaloy
Roselle Ngaloy
SDSaroj P. Dash
Saroj P. Dash
RKRoland Kádár
Roland Kádár
Thermal conductivity enhancement in polymers is vital for advanced applications. This study introduces a novel method to align hexagonal boron nitride (hBN) nanosheets within polydimethylsiloxane (PDMS) matrices using a Halbach array to create a highly uniform magnetic field. This technique achieves significant improvements in thermal conductivity by effectively aligning hBN nanosheets. This research shows that hBN nanosheets, when aligned, can drastically enhance thermal conductivity in PDMS composites. Specifically, 10 wt.% vertically aligned hBN nanosheets in a rotating magnetic field achieve a thermal conductivity of 3.58 W mK −1 , an impressive 1950% increase over pure PDMS. Additionally, the study explores the effects of orientation on dielectric properties, finding that the orientation of hBN nanosheets also improves electrical insulation and increases the dielectric constant while maintaining extremely low dielectric losses. For a vertically oriented sample, the dielectric constant reaches ≈14, and dielectric losses are as low as 0.0049 at 100 Hz, highlighting their potential for energy storage capacitors. This approach not only enhances thermal management but also maintains or improves electrical insulation, offering promising advances for polymer composites in various technological applications.

12 November 2024 in Engineering Applications of Artificial Intelligence
Verified
Journal Article
Open access
AMAses Akas Mishra
Ases Akas Mishra
VGViney Ghai
Viney Ghai
VMValentina Matovic
Valentina Matovic
DADragana Arlov
Dragana Arlov
RKRoland Kádár
Roland Kádár

1 February 2024 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
KAKasra Amini
Kasra Amini
AMAses Akas Mishra
Ases Akas Mishra
ASAmit Kumar Sivakumar
Amit Kumar Sivakumar
DADragana Arlov
Dragana Arlov
FIFredrik Innings
Fredrik Innings
FLFredrik Lundell
Fredrik Lundell
Thixo-elasto-viscoplastic (TEVP) fluids are very complex fluids. In addition to elasticity and viscoplasticity, they exhibit thixotropy, i.e., time-dependent rheology due to breakdown and recovery of internal structures at different length- and timescales. General and consistent methods for a priori flow prediction of TEVP fluids based on rheological characteristics are yet to be developed. We report a combined study of the rheology and flow of 18 samples of different TEVP fluids (three yogurts and three concentrations of Laponite and Carbopol, respectively, in water in both the unstirred and a stirred state). The rheology is determined both with standard protocols and with an ex situ protocol aiming at reproducing the shear history of the fluid in the flow. Micrometer resolution flow measurements in a millimeter scale rectangular duct are performed with Doppler Optical Coherence Tomography (D-OCT). As expected, the results show the existence of a plug flow region for samples with sufficiently high yield stress. At low flow rates, the plug extends almost all the way to the wall and the extent of the plug decreases not only with increased flow rate but also with increased thixotropy. The ex situ rheology protocol enables estimation of the shear rate and shear stress close to the wall, making it possible to identify two scaling laws that relates four different non-dimensional groups quantifying the key properties wall-shear stress and slip velocity. The scaling laws are suggested as an ansatz for a priori prediction of the near-wall flow of TEVP fluids based on shear flow-curves obtained with a rheometer.

1 January 2025 in Physics of Fluids
Verified
Journal Article
Open access
AMAses Akas Mishra
Ases Akas Mishra
UAUlrica Almhöjd
Ulrica Almhöjd
HÇHülya Çevik-Aras
Hülya Çevik-Aras
AFAmela Fisic
Amela Fisic
RORichard Olofsson
Richard Olofsson
RKRoland Kádár
Roland Kádár
Saliva plays a critical role in oral health, offering protection, aiding in digestion, and facilitating speech and swallowing. This study explores the biochemical composition of human saliva from healthy subjects, including total protein, glycoprotein, and calcium concentrations, in relation to its shear and time-dependent rheological properties. Eleven healthy, nonsmoking subjects were recruited, and salivary secretion rates were measured. Assays were used to determine concentrations of total protein, glycoproteins, and calcium, in addition to rheometry for evaluating the rheological properties of saliva. The results showed that unstimulated saliva, dominated by the mucins MUC5B and MUC7, displayed significantly higher viscosity and pronounced viscoelastic properties compared to stimulated saliva. Rheological analysis revealed saliva to be a viscoelastic material, exhibiting both elastic (solid-like) and viscous (liquid-like) responses. Shear thinning behavior was observed, where viscosity decreased with increasing shear rates, contributing to the fluid's ability to adapt to varying oral conditions. Furthermore, saliva exhibited thixotropy, a time-dependent material behavior characterized by structural breakdown under shear and recovery at rest. Calcium and glycoprotein levels were positively correlated with increased viscoelasticity, particularly with the storage modulus (G′), which reflects the ability of saliva to store elastic energy. These findings highlight the intricate relationship between the biochemical composition of saliva and its rheological properties, specifically its capacity for shear thinning, viscoelastic behavior, and time-dependent recovery, which are vital for its lubrication and protective functions in the oral cavity.

23 June 2025 in Macromolecular Rapid Communications
Verified
Journal Article
Open access
AMAses Akas Mishra
Ases Akas Mishra
MCManoj Chandregowda
Manoj Chandregowda
JFJanina Faiß
Janina Faiß
Marko BekMarko Bek
Marko Bek
ATAnn E. Terry
Ann E. Terry
RKRoland Kádár
Roland Kádár
Post‐extrusion flow dynamics of soft matter are governed by their elasto‐viscoplastic (EVP) rheological properties, which influence filament stability, die swelling, and shape fidelity in extrusion‐based 3D printing. Achieving precision and control in printed structures requires optimizing yield stress, viscoelasticity, and extrusion pressure to minimize excessive die swelling and material spreading, which can lead to unstable extrusion and poor print fidelity. We investigate Carbopol‐polyethylene oxide (PEO) blends as model EVP fluids, systematically varying their composition to assess die swelling, print width, and deposition accuracy. Rheo‐SAXS measurements reveal that die swelling can be directly related to characteristic nanoscale lengthscales. Parametric analysis using the Ohnesorge () and modified Bingham () numbers reveals that at high (yield stress, Pa) and , surface tension and viscoelastic effects dominate, leading to excessive die swelling and spreading upon deposition (up to 1.6 and 6 times the nozzle diameter, respectively), ultimately causing drop formation rather than stable filament extrusion. Conversely, and ensure optimal printability, high shape fidelity, and minimal die swelling. These findings guide EVP formulation and optimal extrusion pressure using dimensionless groups that capture material rheology and flow behavior.