10 April 2024 in Environmental Research
SPShyam Krishnan Pisharody
+4
Heavy carbon industries produce solid side stream materials that contain inorganic chemicals like Ca, Na, or Mg, and other metals such as Fe or Al. These inorganic compounds usually react efficiently with CO2 to form stable carbonates. Therefore, using these side streams instead of virgin chemicals to capture CO2 is an appealing approach to reduce CO2 emissions. Herein, we performed an experimental study of the mineral carbonation potential of three industrial steel slags via aqueous, direct carbonation. To this end, we studied the absorption capacities, reaction yields, and physicochemical characteristics of the carbonated samples. The absorption capacities and the reaction yields were analyzed through experiments carried out in a reactor specifically designed to work without external stirring. As for the physicochemical characterization, we used solid-state Fourier Transform Infrared Spectroscopy (FTIR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Using this reactor, the absorption capacities were between 5.8 and 35.3 g/L and reaction yields were in the range of 81-211 kg CO2/ton of slag. The physicochemical characterization of the solid products with solid FTIR, XRD and SEM indicated the presence of CaCO3. This suggests that there is potential to use the carbonated products in commercial applications.
1 February 2024 in Physics of Fluids
Thixo-elasto-viscoplastic (TEVP) fluids are very complex fluids. In addition to elasticity and viscoplasticity, they exhibit thixotropy, i.e., time-dependent rheology due to breakdown and recovery of internal structures at different length- and timescales. General and consistent methods for a priori flow prediction of TEVP fluids based on rheological characteristics are yet to be developed. We report a combined study of the rheology and flow of 18 samples of different TEVP fluids (three yogurts and three concentrations of Laponite and Carbopol, respectively, in water in both the unstirred and a stirred state). The rheology is determined both with standard protocols and with an ex situ protocol aiming at reproducing the shear history of the fluid in the flow. Micrometer resolution flow measurements in a millimeter scale rectangular duct are performed with Doppler Optical Coherence Tomography (D-OCT). As expected, the results show the existence of a plug flow region for samples with sufficiently high yield stress. At low flow rates, the plug extends almost all the way to the wall and the extent of the plug decreases not only with increased flow rate but also with increased thixotropy. The ex situ rheology protocol enables estimation of the shear rate and shear stress close to the wall, making it possible to identify two scaling laws that relates four different non-dimensional groups quantifying the key properties wall-shear stress and slip velocity. The scaling laws are suggested as an ansatz for a priori prediction of the near-wall flow of TEVP fluids based on shear flow-curves obtained with a rheometer.