19 March 2020 in IEEE Transactions on Geoscience and Remote Sensing
The problem of waveform separation for the multiple-input multiple-output (MIMO) imaging radar is considered in this article. In the conventional match filtering (MF)-based waveform separation methods, the cross-correlation noise among different waveforms is inevitable and may seriously reduce the performance of the MIMO radar, especially in target imaging, where a large number of transmissions are required. In this article, a cognitive waveform separation method is proposed based on the orthogonality of the frequency-stepped signals in the Doppler domain. The basic idea of the proposed waveform separation method is to extract different spectrums that occupy different Doppler coverages after interpulse phase modulation. In particular, the mix operation before filtering is conducted due to its compression effort to hold all the Doppler spectrums in one period. Depending on the prior knowledge, the target characteristics, and the imaging resolution requirement, a cognitive optimization model considers both the waveform separation and the target imaging to obtain the most suitable transmitting parameters for different targets. The inner relationships between the transmitting parameters, waveform separation, and radar imaging are fundamental to transmitting the parameter optimization. The perception-action cycle of cognition is achieved via the quantum genetic algorithm (QGA). The simulation results show the superiority of the proposed method with respect to the MF-based separation methods in the MIMO radar imaging.
14 January 2021 in IEEE Transactions on Geoscience and Remote Sensing
A cognitive antenna selection strategy for multi-in multi-out (MIMO) imaging radar is proposed in this article. The basic idea of our strategy relies on the dynamic selection of the antenna location according to the feedback information to enhance the image quality and reduce the computational burden simultaneously. The aim of our strategy is to indirectly minimize the mean squared error associated with the amplitudes and positions of the strong scattering centers of the target through the frame potential. Specifically, it is assumed that the imaging process is initially performed via a conventional uniform linear array/random sparse array of collocated MIMO radar; hence, based on the collected data, an initial image of the target is derived (perception). Then, the accuracy of low-resolution images is enhanced progressively according to the cognitive paradigm via a specific antenna location selection at the next transmission (action). Benefit from the enhanced accuracy, the support area of targets can be estimated to reduce the dimension of the undersampling matrix and, finally, the computational burden in the subsequent high-resolution image reconstruction process is reduced. The simulation results highlight the capabilities of our cognitive approach to provide more interesting benefits in imaging than the random selection strategy and demonstrate the enhanced imaging performance of cognitive sparse MIMO array under the condition of limited antennas and noise.
1 December 2016 in Digital Signal Processing
29 June 2022 in IEEE Geoscience and Remote Sensing Letters
Wideband interference (WBI) is detrimental to high-resolution radar due to its high power and wide frequency occupancy. In this study, a deep learning (DL) method is proposed to predict the time–frequency (TF) feature of WBI and applied to cognitive radar high-resolution range profile (HRRP) estimation. Specifically, by performing short-time Fourier transform (STFT) on the WBI signal collected in the past and using a sliding window, a series of WBI TF figures is generated. A long short-time memory (LSTM) network is then used to learn the spatiotemporal (ST) correlation of these TF figures, thus predicting the WBI TF feature in the future, based on which, a cognitive method is used for target HRRP estimation with reduced influences of WBI. Numerical results demonstrate the effectiveness of the proposed methods.
30 June 2020 in IEEE Access
This paper presents a novel framework for suppressing time-varying radio frequency interference (TRFI) in wideband dechirping radar. The TRFI challenges the wideband radar because of 1) changing in wide spectra range; 2) dynamic nature and unpredictability; 3) significant noise power in limited band. In this paper, an essential phenomenon of real measured data about TRFI in dechirping process is analyzed, where it is smashed into several segments because of the narrowband filtering. Based on that, a 2-step framework combining the interference filtering and frequency estimation is proposed. First, since the different sparsity of signal of interference, a simple yet very effective regional filtering method based on l1 norm of STFT is applied, which transforms original problem into a sparse signal recovery problem. Second, for 1-D signal, the reweighted atomic norm minimization (RAM) algorithm is applied to estimate the signal from defect filtered data; for 2-D signal block, a weighting strategy is proposed to promote the accuracy of original 2-D atomic norm minimization method. This method can be implemented as an interference suppression stage for wideband radar with dechirping processing. Experiment of real measured signal in TRFI environment and simulation of defect signal block illustrate its effectiveness.