The integration of solar cells with supercapacitors into hybrid monolithic power packs can provide energy autonomy to smart electronic devices of the Internet of Things (IoT) by mediating between intermittent load and supply. Herein, such a photorechargeable supercapacitor (also called a photosupercapacitor) is developed via a three‐electrode integration of a p–i–n halide perovskite solar cell with a gel electrolyte‐type supercapacitor that uses mesoporous N‐doped carbon nanospheres (MPNC) as the active electrode material. Benefiting from the large surface area, well‐defined mesoporous structure, and homogeneous particle size of the MPNC material, the supercapacitor demonstrates high capacitance, resulting in large energy and power densities with a high charge/discharge efficiency. Its integration with a large‐area (1 cm2) FA0.75Cs0.25Pb(I0.8Br0.2)3 perovskite solar cell, with an optimized layer sequence to minimize degradation, results in a photosupercapacitor exhibiting fast (< 5 s) photocharging up to 1 V. The outstanding peak overall photoelectrochemical energy conversion efficiency of 11.5% is a result of a high solar cell power conversion efficiency of 12.5%, a high supercapacitor storage efficiency of 92%, and low internal energy losses due to monolithic integration. These results underline the high potential of this type of device toward application in the IoT.
Off‐grid devices require autonomous power supply systems that can be achieved via coupling a solar cell with a supercapacitor in one integrated multifunctional device that is able to harvest energy from the environment, store, and release it on demand. Herein, a straight‐forward approach is proposed to realize a monolithic photosupercapacitor rechargeable under illumination by integrating a silicon (Si) solar cell with an electrochemical double‐layer capacitor (EDLC) based on mesoporous N‐doped carbon nanospheres (MPNC) in a three‐electrode configuration, i.e., via a shared electrode. The optimized porous structure of the MPNC‐EDLC electrodes results in a high storage efficiency of 95% and a superior performance compared to an activated carbon based EDLC. When monolithically integrated with a highly compatible and technologically robust Si solar cell in a photosupercapacitor, fast charging up to 0.63 V (2.5 V for a module of four photosupercapacitors connected in series) in less than 5 s is attained even under weak illumination conditions, with an outstanding peak overall efficiency of 11.8%. These results show high potential toward the development of photorechargeable and decentralized power sources for deployed smart electronic devices.
The rational design of carbon‐based electrode materials plays an important role in improving the electrochemical properties of both, energy storage and energy conversion electrodes and devices. For most applications, well‐defined and easily processable porous carbon‐based electrode materials with controlled particle morphology (ideally spherical), particle size, and intraparticle pore size are desired. Here, a hard‐templating synthesis toolbox is reported for highly‐monodisperse meso‐ and macroporous N‐doped carbon nanospheres (MPNCs) as a versatile material platform for the 3D bottom‐up design of porous electrodes. With this approach, it is possible to change the MPNC pore size without affecting the particle size. By changing the template size, the pore size is adjusted between 15 and 99 nm while maintaining a particle size ≈300 nm. MPNCs are further used in electrochemical double‐layer capacitors (EDLCs) as model application to demonstrate pore size effects on the performance independently from particle size effects, resulting in increasing specific capacitances for decreasing pores sizes, which correlates well with the surface area of the MPNCs and mass transport phenomena in the electrode. In conclusion, the toolbox allows to control intraparticulate porosities while keeping interparticulate properties constant, essential parameters to enable a true bottom‐up 3D electrode design.
The increasing demand for batteries in mobile devices, electromobility, and stationary storage requires the development of new battery materials. The organic redox‐active polymer poly(vinyl‐ N ‐methylphenothiazine) (PVMPT) shows a fast and reversible electrochemical reaction at a potential of 3.5 V versus Li|Li + and is a p ‐type electrode material. Due to the solubility of the oxidized form of PVMPT in many liquid electrolytes, strategies are needed to reduce the solubility and improve active material retention. Previous approaches focuses on adapting the electrolyte or polymer structure. A third strategy relates to the immobilization of PVMPT in the intra‐ and interparticle porosity generated by conductive carbon additives during electrode design. In a previous study, it is shown that the conductive carbon particle size has a major impact on the battery performance and can alter the electrode behavior between high accessible specific capacity and high rate capability and specific capacity retention. Here, an advanced approach is reported, in which N ‐doped (meso)porous carbon (MPNC) nanospheres with tailored intraparticle porosity and constant particle size are applied, whereby the entire volume of the carbon particles can be used for the immobilization of PVMPT. This allows reaching high specific capacities while maintaining good rate capability and high specific capacity retention.
The electrochemical reduction of N 2 in aqueous media and ambient conditions would present a great advancement in the defossilization of the fertilizer and energy sector, if the obstacles to this technology were not as significant as they are at present. Some recent reports have raised doubts about whether the electrochemical nitrogen reduction reaction (eNRR) is even possible in aqueous media. Herein, a type of metal‐organic framework (MOF)‐derived Fe and Zn single atom catalyst for the eNRR is revisited, which has been reported more than once in recent literature to be active for eNRR in aqueous media. Electrochemical measurements reported here show the inactivity of the investigated iron‐based catalysts for the eNRR in neutral aqueous media when contaminations are excluded. In stark contrast, the reduction of NO x contamination to ammonia is shown to be a possible reason for false positive results. The reduction of nitrate to ammonia (NO 3 ‐RR) is itself an emerging field of research that investigates the conversion of nitrate from wastewater to ammonia. For the NO 3 ‐RR, the MOF‐derived catalysts show good activity and selectivity, which depends on the iron site density in the catalyst. An ammonia yield of 19.1 mg h −1 mg cat−1 at −1.0 V versus RHE and a maximum faradaic efficiency (FE) of 100% at −0.9 V versus RHE is achieved.
Carbon nanostructures are widely used in electrodes for energy storage and conversion applications due to their unique properties. Unfortunately, carbon materials can degrade under harsh oxidative electrochemical conditions, leading to carbon corrosion to CO and CO2. Therefore, it is necessary to develop methods for in situ monitoring of carbon corrosion during system operation. In this work, 13C labeling is introduced into mesoporous N‐doped carbon nanospheres and N‐doped hydrothermal carbon aerogels, allowing the selective detection of 13CO2 via electrochemically coupled mass spectrometry during carbon corrosion. Different labeling degrees (unlabeled, partially and fully labeled) are achieved while maintaining the carbon material's morphology and physicochemical properties. These materials and mixtures of unlabeled and fully labeled materials are subjected to accelerated stress tests to evaluate their carbon corrosion behaviour. The results demonstrated that 13CO2 can only be found in labeled samples, regardless of whether they are partially labeled or a mixture of unlabeled and fully labeled materials. This technique facilitates in situ detection of carbon corrosion, even in the presence of a CO2 background in air. More importantly, it allows us to distinguish between corrosion originating from the carbon material itself and other carbon‐containing components within electrochemical systems, thereby advancing the understanding of carbon materials in such systems.