24 November 2024 in Small
The rational design of carbon‐based electrode materials plays an important role in improving the electrochemical properties of both, energy storage and energy conversion electrodes and devices. For most applications, well‐defined and easily processable porous carbon‐based electrode materials with controlled particle morphology (ideally spherical), particle size, and intraparticle pore size are desired. Here, a hard‐templating synthesis toolbox is reported for highly‐monodisperse meso‐ and macroporous N‐doped carbon nanospheres (MPNCs) as a versatile material platform for the 3D bottom‐up design of porous electrodes. With this approach, it is possible to change the MPNC pore size without affecting the particle size. By changing the template size, the pore size is adjusted between 15 and 99 nm while maintaining a particle size ≈300 nm. MPNCs are further used in electrochemical double‐layer capacitors (EDLCs) as model application to demonstrate pore size effects on the performance independently from particle size effects, resulting in increasing specific capacitances for decreasing pores sizes, which correlates well with the surface area of the MPNCs and mass transport phenomena in the electrode. In conclusion, the toolbox allows to control intraparticulate porosities while keeping interparticulate properties constant, essential parameters to enable a true bottom‐up 3D electrode design.
19 September 2024 in Advanced Energy and Sustainability Research
AKAngela Sasic Kalagasidis
+4
As the global deployment of renewable technologies accelerate, finding efficient ways to store energy will aid in responding to shifting energy demands. A prospective option not only in harvesting solar energy but also in emission‐free heating is MOlecular Solar Thermal (MOST) energy storage. A central part of MOST applications is to develop methods to release the stored energy. Herein, the Quadricyclane (QC)‐to‐Norbornadiene catalyzed back reaction is explored in a specially designed packed‐bed reactor. Four distinctly sized and purposely synthesized platinum on activated carbon catalysts are studied to trigger the heat release from the energy‐dense QC isomer. The catalysts are fully characterized using a variety of structural, surface, and spectroscopic techniques. Parameters to optimize catalytic conversion and heat release in flow conditions are explored including particle size and packing behavior, flow rates, and molecular residence times. Moreover, using CO pulse chemisorption technique, site time yield values and a turnover number are reported. Complementary to the flow reactions, computational fluid dynamic simulations applying lattice Boltzmann methods to two catalytic packed beds of different size ranges are done to evaluate fluid‐dynamic behavior within the reactor bed to ascertain the ideal particle size and packing density for catalysis in MOST applications.
7 July 2026 in Advanced Energy Materials
Achieving high‐energy‐density “anode‐free” sodium batteries remains a daunting challenge due to rapid capacity decay caused by poor reversibility and uncontrolled dendritic growth on bare current collectors. To overcome these limitations, we propose a potent interfacial engineering strategy: an aluminum current collector modified with a precisely engineered atomic‐layer‐deposited ultrathin ZnF 2 layer. We demonstrate that the ZnF 2 coating undergoes in situ electrochemical transformation during initial sodiation, forming a dense and conformal NaF/Na–Zn interphase. The sodiophilic Na–Zn alloy markedly lowers the nucleation overpotential, promoting highly uniform Na plating across the interface. Working synergistically, the NaF component stabilizes the solid‐electrolyte interphase by regulating Na + flux. Enabled by this dual‐functioning framework, the ZnF 2 ‐modified aluminum current collector achieves an exceptionally high average Coulombic efficiency of ∼99.76% under aggressive plating/stripping conditions (0.5 mA cm −2 , 1.0 mAh cm −2 ). Furthermore, anode‐free full cells pairing this modified current collector with high‐mass‐loading Na 3 V 2 (PO 4 ) 3 cathodes (11.6–14.3 mg cm −2 ) exhibit significantly improved cycling stability. This work establishes, to the best of our knowledge, the first example of atomic‐layer‐deposited ZnF 2 on aluminum deliberately converted into a NaF/Na–Zn interphase for anode‐free sodium batteries, providing a simple and scalable strategy for high‐performance sodium‐based energy storage systems.
31 May 2026 in ACS Energy Letters
Employing indium-based transparent conductive oxides (TCO) such as indium tin oxide (ITO) in silicon solar cells is already a hurdle due to the scarcity of indium for the photovoltaic community. This is even more challenging in perovskite/silicon multijunction solar cells where TCO layers are necessary for multiple applications beyond transparency and lateral carrier transport. Development of perovskite/perovskite/silicon triple-junction solar cells is a relatively new research focus. It is important to consider this criticality of the raw materials used during the design and development phase. In this work, we successfully replaced all four ITO layers used in our perovskite/perovskite/silicon triple-junction solar cell with an indium-free material. We mainly used zinc-doped tin oxide (ZTO), while for the silicon bottom cell’s front and rear contacts an interfacial layer of aluminum-doped zinc oxide (AZO) was used to ensure low contact resistance/efficient vertical transport to the silicon thin films. To replace the ITO top TCO of the perovskite top cell, a ZTO material with lower ZnO fraction was used to achieve a lower sheet resistance/more efficient lateral transport. With this, we present the first fully indium-free silicon-based triple-junction solar cell with no efficiency penalty.