The dispersion copolymerization of methacryloyl terminated poly(ethylene glycol) (MMA-PEG) macromonomer and styrene initiated by a water- and oil-soluble radical initiator was investigated by a conventional gravimetric method at 60°C. The rate of polymerization and number of radicals per particle were found to decrease with conversion and decrease was more pronounced with the oil-soluble initiator. On the other hand, the size, number of particles and molecular weight of polymers increased with conversion and increase was more pronounced with the water-soluble initiator. The experimental data indicate that the formation of radicals in the continuous phase plays a dominant role in the growth of polymer chains and polymer particles. The distribution of the oil-soluble initiator between continuous and monomer/polymer phases leads to the generation of radicals also in the monomer/polymer phase and to the increased termination events. The generation of radicals and the termination of growing radicals in polymer particles are promoted through the cage effect mechanism.
This study aims to investigate the mechanical properties of concrete containing phase change materials (PCM). This research begins with the investigation of melting temperature, enthalpy, the thermal conductivity of the phase change materials using the T-history method, followed by preparation of concrete containing PCM, and finally testing of mechanical properties of concrete through compressive strength test. This study used beeswax, tallow, and dammar gum as PCM mixture. From the results of the PCM properties test, shows that the latent heat energy content from beeswax and tallow exhibit an excellent potential to be used as PCM, while dammar gum is benefited in increasing the thermal conductivity of concrete containing PCM. From concrete specimen test containing 10%, 20% and 30% PCM with 7 days and 28 days aged, the results exhibit that the mechanical properties of the concrete decreased along with the increasing of PCM content. The same test also conducted at the PCM melting temperature. Therefore, the concrete compressive strength test conducted at 45 oC. From the test results, the concrete compressive strength decreased about 3–24% of PCM-0% concrete compressive strength. Drastic compressive strength reduction tends to occur in PCM-Tallow concrete mixture. This study concluded that the PCM is potentially useful as a heat energy absorber material in buildings and lightweight concrete rather than construction structures.
Synthesis of silica particle was conducted using the sol gel method from Aceh Besar rice husk ash. Sol gel method is an environmental-friendly and easy process to extract silica particles (SiO2) that consists of two stages of hydrolysis and polycondensation. The aim of this research was to analyse the influence of variations in the solvent concentration (1 N, 1.5 N, 2 N, 2.5 N and 3 N) using the sol gel method on the characteristics of silica particle. The rice husk ash was refluxed using solvent (sodium hydroxide) and the acidification process was using hydrochloric acid (HCl). The result of this study indicated that the highest yield in treatment was using 3 N NaOH, which was 39.66 percent. Based on XRD result, the silica was in the crystalline phase and had a particle size of 13,59-41,56 nm and functional groups of silanol (Si-OH) and siloxane (Si-O-Si). Based on the result of SEM characterization, uneven and agglomerated particle shapes were obtained.