4 November 2024 in RSC Sustainability
Various supported Ru-based catalysts have been tested for CO 2 hydrogenation under different temperatures, pressures and H 2 /CO 2 ratios. Ru/TiO 2 is found to be the most active and stable catalyst over a range of process conditions followed by Ru/ZrO 2 .
14 May 2026 in ChemCatChem
Transient experimentation is broadly applied in heterogeneous catalysis as insights into surface dynamics can be retrieved. However, the nature and activity of the involved surface intermediates remain uncertain, impeding clear mechanistic conclusions. Thus, in this work, we extend transient experimentation with microkinetic modeling and spectroscopic techniques. In this study, CO 2 methanation experiments were performed on a supported catalyst (Ru/TiO 2 ) using the Periodic Transient Kinetics (PTK) method. Elemental balances based on the transient results showed decoupled hydrogenation pathways and storage behavior for surface carbon and oxygen species. The nature of these species was elucidated by Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) studies providing evidence for support‐bound species. Potential lumped mechanisms were formulated discriminating between species adsorbed on the support or active material. On the basis of these mechanisms, microkinetic models were set up, fitted to the experimental data and compared by their deviation to the transient experimental data. By comparing the steady‐state coverage of the simulated surface to the spectroscopic results, plausibility was checked. We show that DRIFTS, PTK, and microkinetic modeling provide complementary data in a way that quantitative mechanistic information can be obtained. This synergy is only possible using dynamic experimentation.
4 August 2026 in SSRN Electronic Journal
SHSafeiya Mustafa Hussain
Designing an integrated, flexible and cost effective Fischer-Tropsch process for the conversion of CO/CO2 mixtures to hydrocarbons as chemical feedstocks or sustainable aviation fuels is of great interest to the chemical industry. We demonstrate that using Ru as catalyst CO/CO2 mixtures can be flexibly transformed into hydrocarbons suitable for further processing within a single process step. The selectivity of this process to the various hydrocarbons, expressed by the chain growth probability, depends on the used CO/CO2 mixture and the operating conditions. Explicitly modeling this dependence is a challenging task. We propose a Bayesian model based on mechanistic considerations and parameterized using Bayesian inference. Our Bayesian design of experiments reveals a strong temperature dependence as well as an inhibiting effect of CO2 on chain growth. The resulting model possesses high predictive power and allows for consistent uncertainty quantification of the chain growth probability even outside of the parameterized range. This makes it useful for the design and operation of innovative, flexible and cost effective CO/CO2 Fischer-Tropsch processes.
19 February 2025 in Chemie Ingenieur Technik
The need for a pretreatment strategy for CO and CO2 hydrogenation is already known for Fe‐ and Co‐based Fischer‐Tropsch catalysts but is unexplored for Ru‐based catalysts. The aim of this work was to establish a starting point from which to systematically develop pretreatment strategies to maximize the activity, selectivity, and stability of the catalyst. The results show that all pretreatment strategies tested here are equal or better than no pretreatment for the conversion of CO2. The pretreatment with CO/H2 synthesis gas can double the activity, but the advantage is diminished over 80 h of experiment. In contrast, the use of dilute O2 significantly increases the selectivity towards methane while pure CO2 significantly increases the selectivity to higher hydrocarbons.