1 April 1998 in Journal of Electronic Materials
2 April 1998 in Electronics Letters
The authors report GaN pin photodetectors with very low dark currents (< 10 pA at –10 V), and high external quantum efficiencies (~35%). These photodetectors have a flat responsivity above the bandgap (measured at ~0.10 A/W) with a sharp, solar-blind cutoff at the band edge.
6 November 1997 in Electronics Letters
Mg-doped GaN epitaxial layers were grown on (0001) sapphire by metal organic chemical vapour deposition and were characterised by room-temperature and variable-temperature Hall-effect measurements. The authors report an in-situ Mg acceptor activation procedure which occurs in a N2 ambient during the post-growth cool-down cycle. GaN:Mg films with a wide range of free-hole concentrations and electrical resistivities have been grown by varying the Mg precursor molar flow rate, the growth pressure, and the growth temperature. The highest 300 K free hole concentrations achieved were p ≃ 2.2 × 1018 cm–3 with mobilities μp ≃ 2.2 cm2/Vs.
1 March 1999 in Journal of Electronic Materials
1 July 1998 in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
By using a “nanoscale aperture” method, we studied the dynamics of localized excitons in active InGaN layers in an InGaN/GaN multiple quantum well (MQW). Local photoluminescence (PL) from local excitation shows very different characteristics from far-field luminescence. PL spectra from these nanoapertures are, in general, blueshifted relative to the spectra acquired in the unmasked regions. The spectra vary from aperture to aperture, reflecting the spatial fluctuation of the In composition in the MQW. In addition, one typically observes spectra with clearly resolved multiple peaks from the small apertures, which may be attributed to compositional and size fluctuations over a length scale longer than the exciton diameter but smaller than the aperture size. The excitation intensity dependence of PL indicates a band-filling effect in the multiple-peak structure. Finally, time-resolved studies reveal a very interesting spectral weight shifting between the higher-energy peaks and the lower-energy peaks.
10 July 2015 in Total Quality Management & Business Excellence
The Bologna process, the increasing number of higher education institutions, the mass education and the demographic problems make the quality of education and quality of the academic teachers a subject of wide public debate and concern. The aim of the paper is to identify the most preferred characteristics of a teacher working at a business school. The research problem was: What should a high-quality business school academic teacher be like? During the research, a six-stage qualitative survey design was proposed, and a letter questionnaire was applied as a free writing instrument and sent to second-year bachelor students of the Faculty of Management at The University of Gdańsk, Poland. To identify the most preferred characteristics, a content analysis and Pareto analysis were used. As a result, 32 characteristics were proposed and grouped into 5 categories, namely tangibles (T), reliability (Rel), responsiveness (Res), assurance (A) and empathy (E). Based on this, several proposals and recommendations for the future were specified. The results obtained help not only to understand the needs of students, but also to prepare the most desired teaching environment in which deep learning outcomes are made possible for future managers in the context of modern economy.