Every day, overweight and excessively heavy vehicles cause damage to roads, bridges, and other vehicle-based infrastructure. To protect this vital transportation infrastructure for the U.S., states have imposed weight limits for commercial and fleet transport vehicles. A common way for enforcing these weight limits is to guide trucks off the road to weigh stations where the vehicles can be weighed using static truck scales. A disadvantage of these dedicated weigh stations is that they take up a substantial amount of space (which is not always available) and time to conduct weighments, as well as cause delays to traffic flow that may impede commerce based on truck transport. A solution to these problems is the use of automatic weigh-in-motion (WIM) systems that are installed in the road and weigh vehicles as they pass by while maintaining their speed. For jurisdictions to effectively use a WIM system for direct enforcement of weight limits, the system must be evaluated against a recognized standard to establish suitability for its intended application. The vast majority of weighing instruments used for legal metrology purposes (including law enforcement) need to comply with the requirements in NIST Handbook 44. However, the NIST Handbook 44 does not (yet) cover WIM systems for direct enforcement. Although state and local jurisdictions use NIST Handbook 44 to certify legal metrological instruments, it does not exclude them from using additional technical standards to certify certain instruments. New York City recently certified a WIM system to protect a critical section of the Brooklyn-Queens Expressway (BQE) by designating it as a pilot project while efforts were made to amend NIST Handbook 44 to include WIM systems for direct enforcement. This publication discusses the main characteristics of WIM systems and how they can be used for direct enforcement. An overview of several alternative documentary standards that can be applied for certification of WIM systems is also provided, with further explanation regarding how New York City Department of Transportation (NYCDOT) implemented the certification of the WIM system to begin issuing citations to overweight vehicles in an effort to protect the BQE.
NIST Handbook 44 includes specifications, tolerances, and other technical requirements for weighing and measuring devices. These requirements are intended to encourage the design, installation, testing, and use of weighing and measuring devices that provide for accurate, repeatable measurements; facilitate clear and transparent transactions for buyer and seller; and do not facilitate fraud. Handbook 44 is adopted by many state, local, and some federal weights and measures authorities to apply to commercial weighing and measuring equipment and associated equipment and for use in applications for law enforcement and the collection of statistical information by government agencies. NIST has a statutory responsibility for cooperation with the states in securing uniformity of weights and measures laws and methods of inspection and publishes this and other NIST Handbooks in partial fulfillment of this responsibility. NIST Handbook 44 was first published in 1949, having been preceded by similar handbooks of various designations and in several forms, beginning in 1918; the handbook is now typically published on an annual basis. This 2023 edition includes amendments made through the Committee on Specifications and Tolerances of the National Conference on Weights and Measures (NCWM) with technical guidance from the Office of Weights and Measures (OWM) of the National Institute of Standards and Technology (NIST) and input from weights and measures officials and industry representatives. These amendments were adopted by the NCWM at its 107th Annual Meeting in July 2022.
NIST Handbook 44 is adopted by many state, local, and some federal weights and measures authorities to apply to commercial weighing and measuring equipment and associated equipment and for use in applications for law enforcement and the collection of statistical information by government agencies. This 2024 edition includes amendments made through the Committee on Specifications and Tolerances of the National Conference on Weights and Measures (NCWM) with technical guidance from the Office of Weights and Measures (OWM) of the National Institute of Standards and Technology (NIST) and input from weights and measures officials and industry representatives. These amendments were adopted by the NCWM at its 108th Annual Meeting in July 2023.