At present, solar power engineering is a rapidly growing technology. The overall installed capacity of the solar power plants is increased. Thus, the importance of solar power plants cost is now an essential problem for power engineers and scientists. Therefore, the implementation of such devices as solar concentrators and solar trackers is now an appropriate measure of solar power plant efficiency increasing. This paper deals with the development and tests of the tracker for the solar panels and acrylic concentrator developed. The relevance of the solar trackers implementation is justified and the calculation of efficiency increase is presented. The fundamental advantages of the solar tracker with the control circuit of the active-type orientation are outlined. The methods of system's control are considered. The electric drive parameters for the solar tracker are chosen based on the weight and size of the solar panel. The main units of the rotation mechanism are shown. An example of the solar tracker implementation in the field conditions is described. As a result, it is found that the use of the solar tracker and the acrylic concentrator allow significant increasing efficiency of the solar power plants in the areas without centralized electric power supply. Moreover, it is often more beneficial than the use of diesel power plants there.
1 February 2017 in IOP Conference Series: Materials Science and Engineering
A modeling problem of the power system, which provides an AC power transmission to a submersible device over the conducting rope, was considered. The power supply system units and their parameters are described. The system multi-dimensional mathematical model in the variables state space with regard to the nonlinear characteristic of system elements is proposed.
1 March 2018 in IOP Conference Series: Materials Science and Engineering
The presented research is devoted to the problem of developing new combinatorial generation algorithms for combinations. In this paper, we develop a modification of Ruskey’s algorithm for unranking m-combinations of an n-set in co-lexicographic order. The proposed modification is based on the use of approximations to make a preliminary search for the values of the internal parameter k of this algorithm. In contrast to the original algorithm, the obtained algorithm can be effectively applied when n is large and m is small because the running time of this algorithm depends only on m. Furthermore, this algorithm can be effectively used when n and m are both large but is small, since we can consider unranking -combinations of an n-set. The conducted computational experiments confirm the effectiveness of the developed modification.
1 February 2017 in IOP Conference Series: Materials Science and Engineering
A practical problem of power supply system modeling for the process submersible device with AC power transmission over the cable-rope was considered. The problem is highly relevant in developing and operation of submersible centrifugal pumps and submersibles. The results of modeling a symmetrical three-phase power supply system and their compliance with the real data are given at the paper. The obtained results in the mathematical and simulation models were similar.
Boosted interest in highly efficient power supplies based on renewables requires involving simulators during both the designing stage and the testing one. It is especially relevant for the power supplies that operate in the harsh environmental conditions of northern territories and alike. Modern solar panels based on polycrystalline Si and GaAs possess relatively high efficiency and energy output. To save designing time and cost, system developers use simulators for the solar panels coupled with the power converters that stabilize the output parameters and ensure the proper output power quality to supply autonomous objects: namely, private houses, small-power (up to 10 kW) industrial buildings, submersible pumps, and other equipment. It is crucial for the simulator to provide a valid solar panel I-V curve in various modes and under different ambient conditions: namely, the consumed power rating, temperature, solar irradiation, etc. This paper considers a solar panel simulator topology representing one of the state-of-the-art solutions. This solution is based on principles of classical control theory involving a pulse buck converter as an object of control. A mathematical model of the converter was developed. Its realization in MATLAB/Simulink confirmed the adequacy and applicability of both discrete and continuous forms of the model during the design stage. Families of I-V curves for a commercially available solar panel within the temperature range from to +25 C were simulated on the model. A prototype of the designed simulator has shown its correspondence to the model in Simulink. The developed simulator allows providing a full-scale simulation of solar panels in various operating modes with the maximum value of the open circuit voltage 60 V and that of the short circuit current 60 A. Issues of statistical processing of experimental data and cognitive visualization of the obtained curves involving the cognitive graphic tool 2-simplex have also been considered within the framework of this research. The simulator designed may serve as a basis for developing a product line of energy-efficient power supplies for autonomous objects based on renewables, including those operating in northern territories.