2 July 2018 in IEEE Transactions on Electron Devices
In this paper, the buffer-related current collapse (CC) in AlGaN/GaN HEMTs is investigated by using pulsed I-V measurements and 2-D drift-diffusion simulations. The simulation results indicate that the negative potential (NP), appearing in the Fe-doped buffer under the gate, is found to account for the CC. The NP will induce threshold voltage shifts, in which an inflection point (IP) of the threshold voltage is found. It could be revealed in pulsed I-V characteristics which are significant to depict trapping effect when building a compact large-signal model. The formation mechanism of the IP is detailed. In the end, a simple threshold voltage model is proposed for verification.
10 January 2022 in IEEE Transactions on Electron Devices
Spin–orbit-torque arising from in-plane polarized spin current has attracted considerable attention for its potential in high-performance magnetic random access memories and spin torque oscillators (STOs). Recent studies have shown that an out-of-plane spin polarization can be even more efficient to drive the magnetization dynamics. In this work, we thoroughly examine the effect of the out-of-plane polarized spin current through macro-spin simulations. We propose separately the desirable conditions of spin polarization for spintronic memory and oscillator devices. It is found that for memory applications, a comparable strength of out-of-plane and in-plane spin polarization is necessary to simultaneously achieve a reduced switching current density and a faster switching speed. Besides, in STOs, the presence of a sizable out-of-plane polarization can provide an increase of oscillation amplitude and/or an improvement on frequency tunability. Our results address the importance of deliberate control on the spin polarization in designing efficient spintronic devices.
19 September 2022 in IEEE Transactions on Electron Devices
It is generally believed that the gate-induced drain leakage (GIDL) current would increase with the hot carrier stress (HCS) time. As more interface electron traps are generated near the drain side, it results in a steeper energy barrier that makes the band-to-band tunneling (BTBT) process much easier. In this work, however, an abnormal decrease of such leakage current was observed in double silicon on insulator MOSFET under floating body (FB) condition. Through systematic characterization on different devices and operation conditions, we find that this behavior can be explained by the activation of lateral parasitic bipolar transistor (PBT), and the subsequent reduction of its current gain after the stress cycle. This is further supported by the simulation results that the induced additional traps would lower the amplified current by increasing the electron recombination rate. Our findings would shed more light on the roles of interface traps played in the MOSFET reliability analysis.
24 February 2022 in IEEE Transactions on Nuclear Science
Double silicon-on-insulator (DSOI) technology featuring two buried oxide layers under silicon film has drawn excessive attention to space applications by modulating the electric field in back channel. This article studied the impact of the total ionizing dose (TID) effect on the n-channel metal oxide semiconductor field effect transistors (nMOSFETs) based on DSOI materials. Radiation-induced degradation in performance only appeared in the metal oxide semiconductor field effect transistor (MOSFET) with $W/L = 0.15~\mu \text{m}$ /10 $\mu \text{m}$ after 1.5 Mrad(Si) irradiation and recovered with negative $V_{\mathrm {bg}}$ applied. However, due to the weak coupling effect between the front and back gates, the threshold voltage ( $V_{\mathrm {th}}$ ) of nMOSFET with $W/L = 10~\mu \text{m}$ /10 $\mu \text{m}$ and $10~\mu \text{m}/0.13~\mu \text{m}$ declined 0.06 V compared with devices before irradiation when $V_{\mathrm {bg}}$ is set to 0 V. The TCAD simulation and testing results reveal that the electric field introduced by negative back-gate bias could effectively mitigate the TID-induced performance degradation in DSOI nMOSFETs. The investigation will facilitate the application of DSOI technology for high-radiation-dose conditions.
23 April 2018 in IEEE Electron Device Letters
For partially depleted (PD) silicon-on-insulator (SOI) technology, body contact technology, such as T-gate (TB) body contact, is often used to suppress the floating body effect for analog or radio frequency (RF) circuits. RF performance is usually measured using a two-port network with body node connected to source node, thereby limiting the potential applications of PD SOI technology. In this letter, a four-port network structure was used for TB SOI MOSFET to evaluate the influence of the body potential on the RF performance. The gate to source and body capacitance were also extracted, individually. It was found that TB device can have an 89% improvement in the cut-off frequency (fT) by tuning the body voltage to 0.5 V when the device was operated at gate voltage equals to 0.4 V and drain voltage equals to 0.3 V. Power dissipation reduction was also observed with forward body bias and lower drain voltage. The results indicate that four-port network structure has potential in RF modeling for PD SOI technology that could facilitate integrating the PD SOI process into low power applications.
22 May 2023 in IEEE Journal of the Electron Devices Society
Forward back biasing (FBB) technique is considered as a potential solution for aging compensation in silicon on insulator (SOI) MOSFET. However, traditional SOI devices under FBB would suffer from extra off-state leakage current (Ioff) and undesirable static power consumption. In this work, we studied the hot carrier degradation and FBB compensation in p-GAA-p MOSFET. With the unique hybrid gate structure, the performance degradation is found to be less severe than pure p gate device; and moreover it can be partially recovered by FBB without the sacrifice of Ioff. The presence of p gates offer the back gate tunability that is not provided by pure GAA gate; while the GAA gate component can effectively prevent the impact of FBB from affecting the surface potential. Our findings in p-GAA-p hybrid gate MOSFETs would be beneficial for device reliability improvement.