Yongwei Chang

Yongwei Chang

Auto-generated profile, based on publicly available information

Yongwei Chang

State Key Laboratory of Materials for Integrated Circuits, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences 1 , 865 Changning Road, Shanghai 200050

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 December 2020 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YLYan Liu
Yan Liu
LLLili Lang
Lili Lang
YCYongwei Chang
Yongwei Chang
YSYi Shan
Yi Shan
XCXiaojie Chen
Xiaojie Chen
YDYemin Dong
Yemin Dong
The cryogenic performance of multinanoscale CMOS transistors with a standard 55-nm Si-bulk technology is systematically investigated by dc measurements. In contrast to 300 K, the cryogenic drain saturation current (Idsat) gain significantly enhances from 54% to 167% with the increasing channel length and has a relatively weak response to width change. In addition, the degraded subthreshold swing (SS) due to the short channel effect is alleviated at lower temperatures. The merits of a typical nMOS transistor (W/L =0.6 μm/60 nm) worked at 4.2 K are associated with an improved Idsat (~1.3 times), decreased drain leakage current with three orders of magnitude, and 2/3 reduced SS. However, the cryogenic Idsat tends to saturate below 10 K and the threshold voltage increases, as well as barrier lowering induced by drain voltage, starts to deteriorate. The detailed analyses on these MOSFET (deep) cryogenic characteristics are implemented based on the comprehensive semiconductor physics images, including energy band change, temperature/geometry-dependent scattering, band-to-band tunneling process, and depletion width influence. Our findings will be beneficial for the community to design ultralow temperature-integrated circuits.

1 March 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
YHYang He
Yang He
SWShun Wan
Shun Wan
SZShi Zhou
Shi Zhou
ZHZeming Huang
Zeming Huang
YCYongwei Chang
Yongwei Chang
HSHuarui Sun
Huarui Sun
Integrating high thermal conductivity cost-effective SiC to the Si-active-layer film is an effective solution to enhance the thermal performance of silicon-on-insulator (SOI) and maintain its distinct electrical performance. Although direct bonding of Si films to SiC substrates demonstrates many advantages over epitaxial growth, different bonding techniques may yield disparate bonding qualities and heat dissipation abilities. Here, a comparative analysis from thermal-mechanical-structural perspectives of different Si/SiC interfaces, prepared by hydrophilic bonding (HB) and surface-activated bonding (SAB) methods, is systematically conducted. It was found that the amorphous interlayer thickness and thermal boundary resistance (TBR) of the SAB-Si/SiC heterojunction can be significantly modulated by annealing, accompanied by a beneficial decreased TBR at high working temperatures. Moreover, the residual stress within the Si film by SAB is greatly reduced to an order of magnitude lower than that by HB. In general, the SAB-Si/SiC interface exhibits a tunable microstructure, comparably low TBR, and nearly fully relaxed stress, potentially outperforming the HB-Si/SiC interface when considering the comprehensive performance. This work puts forward an important thermal-mechanical perspective to evaluate interface bonding quality for practical applications, and removes a headache barrier toward wafer-scale high-yield integration of Si active layers onto SiC substrates to greatly enhance SOI devices' thermal management.

1 August 2015 in Applied Surface Science
Verified
Journal Article
Closed access
YCYongwei Chang
Yongwei Chang
MZMiao Zhang
Miao Zhang
CDChuang Deng
Chuang Deng
CMChuanling Men
Chuanling Men
DCDa Chen
Da Chen
XWXi Wang
Xi Wang

16 October 2018 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
YCYongwei Chang
Yongwei Chang
JLJiexin Luo
Jiexin Luo
JCJing Chen
Jing Chen
LXLingda Xu
Lingda Xu
ZCZhan Chai
Zhan Chai
XWXi Wang
Xi Wang
A compact model for tunnel diode body contact (TDBC) silicon-on-insulator (SOI) n-MOSFETs was developed in this paper. The compact model is implemented in Verilog-A to simulate the dc and radio frequency (RF) performance of a TDBC SOI MOSFET. The TDBC SOI MOSFETs are successfully fabricated and are used to measure important transistor electrical parameters. The investigation results reveal that TDBC structure suppresses floating body effects (FBEs) as well as T-gate body (TB) contact structure and shows significant improvement in RF performance without introducing additional parasitic capacitances compared with the TB device. Kink phenomena and an abnormal subthreshold swing originating from FBEs are sufficiently suppressed. It is demonstrated that the TDBC SOI MOSFETs provide a promising concept for digital, analog, and RF applications. The outputs from this analytic model are in fair agreement with the TDBC experimental data, which validates the effectiveness and robustness of the compact model for TDBC SOI technology. Finally, good accuracy ensures that the proposed model is applicable for the implementation in circuit simulation tools.

24 February 2022 in IEEE Transactions on Nuclear Science
Verified
Journal Article
Closed access
YGYuan Gao
Yuan Gao
KLKai Lu
Kai Lu
YCYongwei Chang
Yongwei Chang
ZXZhongying Xue
Zhongying Xue
XWXing Wei
Xing Wei
Double silicon-on-insulator (DSOI) technology featuring two buried oxide layers under silicon film has drawn excessive attention to space applications by modulating the electric field in back channel. This article studied the impact of the total ionizing dose (TID) effect on the n-channel metal oxide semiconductor field effect transistors (nMOSFETs) based on DSOI materials. Radiation-induced degradation in performance only appeared in the metal oxide semiconductor field effect transistor (MOSFET) with $W/L = 0.15~\mu \text{m}$ /10 $\mu \text{m}$ after 1.5 Mrad(Si) irradiation and recovered with negative $V_{\mathrm {bg}}$ applied. However, due to the weak coupling effect between the front and back gates, the threshold voltage ( $V_{\mathrm {th}}$ ) of nMOSFET with $W/L = 10~\mu \text{m}$ /10 $\mu \text{m}$ and $10~\mu \text{m}/0.13~\mu \text{m}$ declined 0.06 V compared with devices before irradiation when $V_{\mathrm {bg}}$ is set to 0 V. The TCAD simulation and testing results reveal that the electric field introduced by negative back-gate bias could effectively mitigate the TID-induced performance degradation in DSOI nMOSFETs. The investigation will facilitate the application of DSOI technology for high-radiation-dose conditions.

1 June 2017 in Chinese Physics Letters
Verified
Journal Article
Closed access
PDF file
SCShi Cheng
Shi Cheng
YCYong-Wei Chang
Yong-Wei Chang
NGNan Gao
Nan Gao
YDYemin Dong
Yemin Dong
LFLu Fei
Lu Fei
XWXi Wang
Xi Wang
High-resistivity silicon-on-insulator (HR-SOI) and trap-rich high-resistivity silicon-on-insulator (TR-SOI) substrates have been widely adopted for high-performance rf integrated circuits. Radio-frequency loss and non-linearity characteristics are measured from coplanar waveguide (CPW) transmission lines fabricated on HR-SOI and TR-SOI substrates. The patterned insulator structure is introduced to reduce loss and non-linearity characteristics. A metal-oxide-semiconductor (MOS) CPW circuit model is established to expound the mechanism of reducing the parasitic surface conductance (PSC) effect by combining the semiconductor characteristic analysis (pseudo-MOS and C–V test). The rf performance of the CPW transmission lines under dc bias supply is also compared. The TR-SOI substrate with the patterned oxide structure sample has the minimum rf loss (<0.2 dB/mm up to 10 GHz), the best non-linearity performance, and reductions of 4 dB and 10 dB are compared with the state-of-the-art TR-SOI sample's, HD2 and HD3, respectively. It shows the potential application for integrating the two schemes to further suppress the PSC effect.