13 September 2021 in ACS Photonics
Several applications in modern photonics require compact on-chip optical filters with a tailored spectral response. However, achieving subnanometric bandwidths and high extinction ratios is particularly challenging, especially in low-footprint device formats. Phase-shifted Bragg gratings implemented by the sidewall modulation of photonic nanowire waveguides are a good solution for on-chip narrowband operation with reasonable requirements in fabrication and scalability. In this work we report on their implementation and optimization in thin film lithium niobate, a photonic platform that affords reconfigurability by exploiting electro-optic effects. The phase-shifted Bragg grating filters have a footprint smaller than 1 μm × 1 mm and operate at telecom wavelengths, featuring extinction ratios up to 25 dB. We demonstrate transmission bandwidths as narrow as 14.4 pm (Q = 1.1 × 105) and 8.8 pm (Q = 1.76 × 105) in critically coupled structures and multiwavelength Fabry–Perot configurations, respectively, in full agreement with theoretical predictions. Moreover, by taking advantage of the strong electro-optic effect in lithium niobate, in combination with the tight light confinement of nanophotonic wires and the ultranarrow spectral resonances of optimized grating structures, we demonstrate an electric tunability in peak wavelength and transmission of 25.1 pm/V and 2.1 dB/V, respectively, and a 10.5 dB contrast at CMOS voltages. The results pave the way for reconfigurable narrowband photonic filters with a small footprint and low consumption, to be exploited toward on-chip quantum and nonlinear optics, as well as optical sensing and microwave photonics.
2 June 2011 in Optics Express
Electronically tunable optical true-time delay lines are proposed. The devices utilize the combination of apodised gratings and the free-carrier plasma effect to tune the enhanced delay of silicon waveguides at a fixed wavelength. Three variations of the proposed scheme are studied and compared. The compact and integrable devices can achieve tuning ranges as high as ~660 ps with a loss of < 2.2 dB when operated in the reflection mode of the gratings. A delay of ~40 ps with a loss of < 10 dB and an estimated operation bit rate of ~20 Gb/s can be achieved.
27 April 2020 in Applied Physics Letters
Integration of superconducting devices on photonic platforms opens up a wide range of functionalities and applications. We report on NbTiN thin films deposited on SiO2, Si3N4, GaAs, LiNbO3, and AlN as well as on a monolayer of hexagonal boron nitride, using a universal reactive co-sputtering recipe. The morphology and the superconducting properties of the NbTiN thin films with a thickness of 10 nm were characterized by atomic force microscopy and electrical transport measurements. Superconducting strip photon detectors were fabricated using a design suitable for waveguide integration and compared in terms of their internal quantum efficiency and detection pulse kinetics. Our results show well-comparable performances for detectors integrated on different platforms, while also demonstrating that reactive co-sputter deposition of NbTiN at room temperature provides a robust method for realizing superconducting devices on various materials.
14 August 2018 in ACS Applied Materials & Interfaces
30 January 2017 in Applied Physics Letters
In vitro devices that combine chemotactic and physical cues are needed for understanding how cells integrate different stimuli. We explored the suitability of lithium niobate (LiNbO3), a transparent ferroelectric material that can be patterned with electrical charge domains and micro/nanotopography, as a neural substrate. On flat LiNbO3 z-surfaces with periodically alternating charge domains, cortical axons are partially aligned with domain boundaries. On submicron-deep etched trenches, neurites are aligned with the edges of the topographical features. Finally, we bonded a bicompartmental microfluidic chip to LiNbO3 surfaces patterned by etching, to create isolated axon microenvironments with predefined topographical cues. LiNbO3 is shown to be an emerging neuron culture substrate with tunable electrical and topographical properties that can be integrated with microfluidic devices, suitable for studying axon growth and guidance mechanisms under combined topographical/chemical stimuli.
23 October 2023 in Nano Letters
Lithium niobate, because of its nonlinear and electro-optical properties, is one of the materials of choice for photonic applications. The development of nanostructuring capabilities of thin film lithium niobate (TFLN) permits fabrication of small footprint, low-loss optical circuits. With the recent implementation of on-chip single-photon detectors, this architecture is among the most promising for realizing on-chip quantum optics experiments. In this Letter, we report on the implementation of superconducting nanowire single-photon detectors (SNSPDs) based on NbTiN on 300 nm thick TFLN ridge nano-waveguides. We demonstrate a waveguide-integrated wavelength meter based on the photon energy dependence of the superconducting detectors. The device operates at the telecom C- and L-bands and has a footprint smaller than 300 × 180 μm2 and critical currents between ∼12 and ∼14 μA, which ensures operation with minimum heat dissipation. Our results hold promise for future densely packed on-chip wavelength-multiplexed quantum communication systems.