1 October 2007 in Dental Materials
1 November 2012 in Journal of Craniofacial Surgery
JMJosé Vitor Quinelli Mazaro
José Vitor Quinelli Mazaro
Computer-aided design/computer-aided manufacturing images can be taken through either direct or indirect imaging. For the indirect systems, the digitalization is obtained from the impression material or cast, and for the direct ones the image is taken directly from the mouth using intraoral scanners.The direct acquisition systems have been constantly improved because these are less invasive, quicker, and more precise than the conventional method. Besides, the digital images can be easily stored for a long time. Therefore, the aim of this paper was to describe and discuss based on the literature the main direct image acquisition systems available on the market: CEREC Bluecam (Sirona), Lava C.O.S. System (3M ESPE), iTero System (Cadent/Straumann), and E4D System (D4D Technologies).
1 November 2007 in Operative Dentistry
Clinical Relevance: When adhesively cemented, tested fiber posts are fatigue resistant and appear to have no affect on bond strength to root dentin. Thus, the retention strength of these fiber posts could be maintained for an extended period; however, further studies should be conducted.
1 March 2009 in Operative Dentistry
SUMMARY: Objectives: To evaluate the hypothesis that a process of hydrofluoric acid precipitate neutralization and fatigue load cycling performed on human premolars restored with ceramic inlays had an influence on microtensile bond strength results (MTBS). Methods: MOD inlay preparations were performed in 40 premolars (with their roots embedded in acrylic resin). Forty ceramic restorations were prepared using glass-ceramic (IPS Empress). The inner surfaces of all the restorations were etched with 10% hydrofluoric acid for 60 seconds, rinsed with water and dried. The specimens were divided into two groups (N=20): 1–without neutralization; 2–with neutralization. All the restorations were silanized and adhesively cemented (self-curing and self-etching luting composite system, Multilink). Ten premolars from each group were submitted to mechanical cycling (1,400,000 cycles, 50N, 37°C). After cycling, the samples were sectioned to produce non-trimmed beam specimens (vestibular dentin—restoration—lingual dentin set), which were submitted to microtensile testing. Results: Bond strength was significantly affected by the surface treatment (p neutralization) and mechanical cycling (p cycling) (2-way ANOVA and Tukey test, alpha=.05). Conclusion: Hydrofluoric acid precipitate neutralization appears to significantly damage the resin bond to glass-ceramic and should not be recommended. The clinical simulation of the specimens, by using mechanical cycling, is important when evaluating the ceramic-dentin bond.