1 January 2008 in The Journal of Prosthetic Dentistry
JAJose Eduardo Junho de Araujo
Jose Eduardo Junho de Araujo
MAMaria Amelia Junho de Araujo
Maria Amelia Junho de Araujo
EKEstevao Tomomitsu Kimpara
Estevao Tomomitsu Kimpara
+1
1 October 2018 in Dental Materials
1 July 2014 in Operative Dentistry
SUMMARY: The purpose of this study was to evaluate the influence the width of the occlusal isthmus and inlay material had on the stress distribution, displacement, and fracture resistance of upper human premolars. For this in vitro test, 35 intact upper premolars (UPM) were selected and five were kept intact for the control group (group I). The remaining 30 were divided into two experimental groups (n=15) according to the width of isthmus: conservative (CP) and extensive preparation (EP), one third and more than two thirds of cuspal distance, respectively. Five teeth from each experimental group were left without restoration for negative controls (CPnc and EPnc), and the remaining 10 in each group were subdivided according to the inlay material (resin or ceramic): group CPr, CP + indirect resin; group CPc, CP + ceramic; group EPr, EP + indirect resin; and group EPc, EP + ceramic. The cemented inlays were loaded in a universal testing machine at a crosshead speed of 0.5 mm/min until fracture. The fractured specimens were analyzed with stereomicroscopy, and the values of the fracture resistance evaluated by analysis of variance and Tukey test. For the finite element analyses, an average UPM for each group was modeled in Rhinoceros CAD software and imported to Ansys 13.0. An average of 320,000 tetrahedral elements and 540,000 nodes for the seven models were performed using the same experimental simulation setup for each. The models were constrained on the base, and a displacement of 0.02 mm was applied to keep a linear behavior for the analysis. A von Mises stress and total displacement fields were used for the coherence test and the maximum principal stress fields were used for mechanical behavior comparisons. Group I (161.73 ± 22.94) showed a significantly higher mean value than the other experimental groups (EPc: 103.55 ± 15.84; CPc: 94.38 ± 12.35; CPr: 90.31 ± 6.10; EPr: 65.42 ± 10.15; CPnc: 65.46 ± 5.37; EPnc: 58.08 ± 9.62). The stress distribution was different in all of the groups. EPnc showed a higher concentration of tensile stress on the cervical region of the proximal box. CPc and EPc provided a lower tensile stress and a smaller cuspal displacement. Within the limits of this study, the configuration of the inlay preparation is a significant factor in the fracture resistance of premolars: the smaller the amount of remaining tooth, the lower the fracture resistance. In addition, the teeth restored with ceramic materials showed a higher fracture resistance than those restored with composite resin.
1 December 2011 in Journal of Applied Oral Science
MAMaria Amélia Máximo de Araújo
Maria Amélia Máximo de Araújo
OBJECTIVE: This study evaluated, in vitro, the fracture resistance of human non-vital teeth restored with different reconstruction protocols. MATERIAL AND METHODS: Forty human anterior roots of similar shape and dimensions were assigned to four groups (n=10), according to the root reconstruction protocol: Group I (control): non-weakened roots with glass fiber post; Group II: roots with composite resin by incremental technique and glass fiber post; Group III: roots with accessory glass fiber posts and glass fiber post; and Group IV: roots with anatomic glass fiber post technique. Following post cementation and core reconstruction, the roots were embedded in chemically activated acrylic resin and submitted to fracture resistance testing, with a compressive load at an angle of 45º in relation to the long axis of the root at a speed of 0.5 mm/min until fracture. All data were statistically analyzed with bilateral Dunnett's test (α=0.05). RESULTS: Group I presented higher mean values of fracture resistance when compared with the three experimental groups, which, in turn, presented similar resistance to fracture among each other. None of the techniques of root reconstruction with intraradicular posts improved root strength, and the incremental technique was suggested as being the most recommendable, since the type of fracture that occurred allowed the remaining dental structure to be repaired. CONCLUSION: The results of this in vitro study suggest that the healthy remaining radicular dentin is more important to increase fracture resistance than the root reconstruction protocol.
1 March 2009 in Operative Dentistry
SUMMARY: Objectives: To evaluate the hypothesis that a process of hydrofluoric acid precipitate neutralization and fatigue load cycling performed on human premolars restored with ceramic inlays had an influence on microtensile bond strength results (MTBS). Methods: MOD inlay preparations were performed in 40 premolars (with their roots embedded in acrylic resin). Forty ceramic restorations were prepared using glass-ceramic (IPS Empress). The inner surfaces of all the restorations were etched with 10% hydrofluoric acid for 60 seconds, rinsed with water and dried. The specimens were divided into two groups (N=20): 1–without neutralization; 2–with neutralization. All the restorations were silanized and adhesively cemented (self-curing and self-etching luting composite system, Multilink). Ten premolars from each group were submitted to mechanical cycling (1,400,000 cycles, 50N, 37°C). After cycling, the samples were sectioned to produce non-trimmed beam specimens (vestibular dentin—restoration—lingual dentin set), which were submitted to microtensile testing. Results: Bond strength was significantly affected by the surface treatment (p neutralization) and mechanical cycling (p cycling) (2-way ANOVA and Tukey test, alpha=.05). Conclusion: Hydrofluoric acid precipitate neutralization appears to significantly damage the resin bond to glass-ceramic and should not be recommended. The clinical simulation of the specimens, by using mechanical cycling, is important when evaluating the ceramic-dentin bond.