22 August 2018 in Optics Letters
We demonstrate two low-noise 750 MHz ytterbium fiber frequency combs that are independently stabilized to a continuous-wave laser. A bulk electro-optic modulator and a single-stack piezo-electric transducer are employed as fast actuators for stabilizing the respective cavity length to heterodyne beat notes. Both combs exhibit in-loop fractional frequency instabilities of at 1 s. To the best of our knowledge, this is the first demonstration of tightly phase-locked ( root mean square phase noise integrated from 0.1 Hz to 10 MHz) fiber frequency combs with 750 MHz fundamental repetition rate.
5 November 2018 in IEEE Photonics Technology Letters
Fiber lasers have become one of the most important technologies in various industrial, medical and scientific applications. However, their vulnerability to environmental disturbances, such as vibrations and thermal fluctuations, limits the range of practical operations outside of the laboratory. In this paper, we report a simplified, all-normal dispersion, completely all-polarization-maintaining fiber integrated laser operating at 1030 nm. Our laser system employs a single pump laser diode and an all-polarization maintaining fiber pulse compressor capable of generating 700 fs pulses with a pulse energy of 0.45 nJ.
18 January 2021 in Applied Physics Letters
In this paper, a nonlinear amplification system for a low noise 750 MHz ytterbium-doped fiber frequency comb is developed with a repetition rate stabilized to a continuous wave laser by employing a bulk electro-optic modulator. By managing the dispersion prior to the nonlinear amplifier, the proposed high-power frequency comb light source can deliver over 10 W of <90 fs pulse trains with an integrated relative intensity noise instability of 0.04%. Moreover, the noise characteristics of the proposed amplified comb, where the seed laser is a tightly stabilized 750 MHz fiber frequency comb, are analyzed in several representative states of different launched pump powers and pre-chirping group delay dispersions. The optical fiber frequency combs produced by nonlinear amplification may serve as an alternative for achieving high-power and ultrafast combs with good phase stability.