16 March 2022 in Advances in Mechanical Engineering
The digital valve distribution axial piston pump is a swashplate rotary piston pump, the force on slippers is different from that of traditional axial piston pump. At the same time, the control strategy of the distribution valve will affect the pressure in the piston cavity, and then affect the oil film lubrication. According to these characteristics, the modeling method of oil film thickness field was proposed, and the force model of slipper pair and the numerical solution model of oil film lubrication of digital valve distribution axial piston pump were further established. The influence of swashplate rotation speed, swashplate inclination angle, and distribution valve control strategy on the characteristics of oil film lubrication were solved. The results show that the established thickness field model of oil film conforms to the stress characteristics of the slipper of the valve distribution pump. Increasing the swashplate rotation speed and the swashplate inclination angle is beneficial to optimize the oil film lubrication performance. The discharge valve should be opened in advance or closed in delay, which is beneficial to prevent eccentric wear and adhesion wear of slippers. The research results can provide theoretical basis for the optimal design of valve distribution axial piston pump.
1 September 2024 in Physics of Fluids
In order to improve the fluid dynamic lubrication performance of slipper pair of valve distribution (digital distribution) axial piston pump, this paper proposes a theory analytical model of fluid dynamic lubrication for slipper pairs with different surface structures of valve distribution pump and its tribological optimization mechanism of surface microstructure topography. In the model, based on the finite volume method, the least square method combined with the trust region dogleg was proposed to solve the nonlinear system of equations of slipper dynamic balance. The fluid lubrication mechanism of slipper pairs with different surface structures was analyzed, the probability of overturning and eccentric wear of slipper pairs with complex surface structure and the viscous friction torque were quantitatively analyzed, and experimental research was conducted. The results show that the surface microstructure topography has great influence on the fluid lubrication performance of slipper pairs. Compared with before optimization, the friction torque of slipper with single-support belt, double-support belt, and four-support belt is decreased by 8.58%, 13.65%, and 17.07% at most, respectively, but the probability of overturning and eccentric wear of slipper with double-support belt and four-support belt is increased and the oil film becomes thicker. Reducing the friction loss and enhancing the anti-overturning ability of the slipper pair are often difficult to be compatible. The research results lay a theoretical and technical foundation for the optimization of lubrication performance of slipper pair of valve distribution pump.