1 September 2024 in Physics of Fluids
In order to improve the fluid dynamic lubrication performance of slipper pair of valve distribution (digital distribution) axial piston pump, this paper proposes a theory analytical model of fluid dynamic lubrication for slipper pairs with different surface structures of valve distribution pump and its tribological optimization mechanism of surface microstructure topography. In the model, based on the finite volume method, the least square method combined with the trust region dogleg was proposed to solve the nonlinear system of equations of slipper dynamic balance. The fluid lubrication mechanism of slipper pairs with different surface structures was analyzed, the probability of overturning and eccentric wear of slipper pairs with complex surface structure and the viscous friction torque were quantitatively analyzed, and experimental research was conducted. The results show that the surface microstructure topography has great influence on the fluid lubrication performance of slipper pairs. Compared with before optimization, the friction torque of slipper with single-support belt, double-support belt, and four-support belt is decreased by 8.58%, 13.65%, and 17.07% at most, respectively, but the probability of overturning and eccentric wear of slipper with double-support belt and four-support belt is increased and the oil film becomes thicker. Reducing the friction loss and enhancing the anti-overturning ability of the slipper pair are often difficult to be compatible. The research results lay a theoretical and technical foundation for the optimization of lubrication performance of slipper pair of valve distribution pump.
28 February 2025 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
The surface damage caused by the abrasive wear of the slider wear sleeve friction pair under the high pollution condition of the coal mine is one of the important factors affecting the performance of the horizontal pump. In order to improve the anti wear performance of the slider wear sleeve friction pair, the abrasive wear model of the textured slider wear sleeve friction pair was established based on Enhanced Discrete Element Method (EDEM). The breakage and escape of the abrasive particles, and the wear of the textured friction pair, under the conditions of upper contact and lower contact were analyzed. The curve of the abrasive particles number under reciprocating motion, the regional distribution characteristics of abrasive particles, the wear traces and the partition wear amount of the friction pair were obtained. Besides the correlation between the above parameters was analyzed. Finally, the optimal texture position and texture arrangement were determined, and the experimental verification was carried out. The research indicates that the texture with appropriate arrangement has a good anti-abrasive wear function, which reduces the extrusion wear between the abrasive particles and the surface of the specimen while collecting the abrasive particles, and has the effect of guiding the abrasive particles to escape. And the textured slider under lower contact has the best wear resistance. The research can lay a foundation for the design of texture wear reduction and surface damage reduction of reciprocating friction pairs of horizontal piston pumps under high abrasive conditions.