4 November 2019 in Natural Hazards and Earth System Sciences
Flood maps are needed for emergency response, research, and planning. The Height Above Nearest Drainage (HAND) technique is a low-complexity, terrain-based approach for inundation mapping using elevation data, discharge–height relationships, and streamflow inputs. The recent operational capacities of the NOAA National Water Model (NWM) and preprocessed HAND products from the University of Texas offer an operational framework for real-time and forecast flood guidance across the US. In this study, we evaluate the integrated National Water Model –Height Above Nearest Drainage (NWM–HAND) flood mapping approach using 28 remotely sensed inundation maps and 54 reach-level catchments. The results show the NWM–HAND method tends to underpredict inundated cells in 4th-order and lower-order reaches but does better with a slight tendency to overpredict in high-order reaches. An evaluation of the roughness coefficient used in the production of synthetic rating curves suggests it is the most important parameter for correcting these errors. Persistent inaccuracies do occur when NWM streamflow predictions are substantially biased (>60 % mean absolute error between NWM and observed streamflow) and in regions of low relief. Overall, the NWM–HAND method does not accurately capture inundated cells but is quite capable of highlighting regions likely to be at risk in 4th-order streams and higher. While NWM–HAND should be used with caution when identifying flood boundaries or making decisions of whether a cell is dry or wet, its applicability as a high-level guidance tool along larger rivers is noteworthy.
17 November 2017 in Jawra Journal of the American Water Resources Association
26 September 2019 in Natural Hazards and Earth System Sciences
Remote sensing analysis is routinely used to map flooding extent either retrospectively or in near-real time. For flood emergency response, remote-sensing-based flood mapping is highly valuable as it can offer continued observational information about the flood extent over large geographical domains. Information about the floodwater depth across the inundated domain is important for damage assessment, rescue, and prioritizing of relief resource allocation, but cannot be readily estimated from remote sensing analysis. The Floodwater Depth Estimation Tool (FwDET) was developed to augment remote sensing analysis by calculating water depth based solely on an inundation map with an associated digital elevation model (DEM). The tool was shown to be accurate and was used in flood response activations by the Global Flood Partnership. Here we present a new version of the tool, FwDET v2.0, which enables water depth estimation for coastal flooding. FwDET v2.0 features a new flood boundary identification scheme which accounts for the lack of confinement of coastal flood domains at the shoreline. A new algorithm is used to calculate the local floodwater elevation for each cell, which improves the tool's runtime by a factor of 15 and alleviates inaccurate local boundary assignment across permanent water bodies. FwDET v2.0 is evaluated against physically based hydrodynamic simulations in both riverine and coastal case studies. The results show good correspondence, with an average difference of 0.18 and 0.31 m for the coastal (using a 1 m DEM) and riverine (using a 10 m DEM) case studies, respectively. A FwDET v2.0 application of using remote-sensing-derived flood maps is presented for three case studies. These case studies showcase FwDET v2.0 ability to efficiently provide a synoptic assessment of floodwater. Limitations include challenges in obtaining high-resolution DEMs and increases in uncertainty when applied for highly fragmented flood inundation domains.
19 February 2018 in Jawra Journal of the American Water Resources Association
28 October 2020 in IEEE Geoscience and Remote Sensing Letters
The Floodwater Depth Estimation Tool (FwDET) provides rapid-response floodwater depth estimations during time-sensitive flood events. Recently, modern cloud-computing advancements and platforms, such as Google Earth Engine (GEE), have further enabled the streamlining and scalability of large-scale geoprocessing. This letter presents a FwDET implementation in GEE (FwDET-GEE) that is open access, utilizes cloud-stored elevation data, and performs geospatial analytics on the fly. This tool offers an innovative solution for producing timely floodwater data during flood activations that require emergency response and post-flood assessment. Accuracy metrics were generated to validate the comparability of FwDET-GEE to FwDETv2.0, which used Python in ArcGIS. To demonstrate the geographic scalability of the model, both local- and region-scale flood events/systems were evaluated. This letter also highlights a use case wherein flooded areas are overlain with building footprint data to identify infrastructure at risk of damage.
8 December 2023 in Communications Earth & Environment
Merging observations from multiple satellites is necessary to ensure that extreme hydrological events are consistently observed. Here, we evaluate the potential improvements to flood detectability afforded by combining data collected globally by Landsat, Sentinel-2, and Sentinel-1. The enhanced temporal sampling increased the number of floods with at least 1 useful image (≤20% clouds) from 7% for single sensors to up to 66% for a potential multi-sensor product. As dramatic as the increased coverage is, the socioeconomic impacts are even more tangible. In the pre-Sentinel era, only 22% of the total population displaced by flood events benefitted from having high-resolution images, whereas a potential multi-sensor product would serve 75% of the displaced population. Additionally, the merged dataset could observe up to 100% of floods caused by challenging drivers, e.g., tropical cyclones, tidal surges, including those rarely seen by single sensors, and thereby enable insights into governing mechanisms of these events.