9 July 2021 in IEEE Journal of Selected Topics in Quantum Electronics
Precise position information is considered as the main enabler for the implementation of smart manufacturing systems in Industry 4.0. In this article, a time-of-flight based indoor positioning system for LiFi is presented based on the ITU - T recommendation G.9991. Our objective is to realize positioning by reusing already existing functions of the LiFi communication protocol which has been adopted by several vendors. Our positioning algorithm is based on a coarse timing measurement using the frame synchronization preamble, similar to the ranging, and a fine timing measurement using the channel estimation preamble. This approach works in various environments and it requires neither knowledge about the beam characteristics of transmitters and receivers nor the use of fingerprinting. The new algorithm is validated through both, simulations and experiments. Results in an $\text{1}\;{\rm{m}} \times \text{1}\;{\rm{m}} \times \text{2}\;{\rm{m}}$ area indicate that G.9991-based positioning can reach an average distance error of a few centimeters in three dimension. Considering the common use of lighting in indoor environments and the availability of a mature optical wireless communication system using G.9991, the proposed LiFi positioning is a promising new feature that can be added to the existing protocols and enhance the capabilities of smart lighting systems further for the benefit of Industry 4.0.
29 March 2021 in Journal of Lightwave Technology
We present a concept for networked optical wireless communications, also denoted as LiFi, to meet the requirements of industrial wireless applications. These are primarily mobility support with moderate data rates per device, reliable real-time communication, and integrated positioning. We describe a distributed multiuser multiple-input multiple-output architecture, serving mobile devices via an optical wireless infrastructure. The system consists of a central unit, being connected to a number of distributed optical frontends covering a larger area. Our main contribution is a medium access control protocol based on space division multiple access. Evaluation results demonstrate the advantages of joint transmission from adjacent optical frontends and the dynamic switching between spatial diversity and multiplexing. The relevance of spatial multiplexing becomes obvious through channel measurements in an indoor scenario. Moreover, we highlight a low-power physical layer based on on-off-keying for battery-powered mobile devices. Our architecture can easily integrate positioning by simultaneously measuring the time-of-flight between multiple optical frontends and the mobile device. We highlight the use of plastic optical fiber as an analog fronthaul technology and discuss the integration with other networks. The main functions described in this paper will be supported by the upcoming IEEE Std 802.15.13.
11 December 2017 in Journal of Lightwave Technology
We present high-speed single channel discrete multitone (DMT) operations of directly modulated 850 nm vertical cavity surface emitting lasers (VCSEL). Successful transmission of 135 Gb/s over 10 m of OM4 multi-mode fiber (MMF) and 114 Gb/s over 550 m is demonstrated below the 7% overhead hard-decision forward error correction (7% HD-FEC) bit error rate (BER) limit. At higher BER limits, i.e. 20% overhead soft decision FEC, which are of arising interest for these high-speed short-range links, data rates of up to 161 Gb/s are presented. This is enabled by high bandwidth, low noise VCSELs, which operate in quasi single-mode to overcome the mode dispersion limitations of the MMF. The applied modulation format is discrete multitone in combination with a Volterra filter based pre-distortion approach, which pre-compensates the linear and nonlinear behavior of the transmission system, primarily the digital-analog converter, the VCSEL, the MMF and the photoreceiver. Furthermore, a detailed investigation of the pre-distortion is given by experimental means, showing that the optimum amount of pre-distortion depends on the applied components and the signal bandwidth. This makes it challenging to predict the optimum, however a pure electrical pre-distortion offers already a fair gain in performance.
26 February 2018 in Circuits, Systems, and Signal Processing
The concept of frequency interleaving (FI) for digital-to-analog converters (DACs) has recently experienced renewed interest, in order to overcome the DACs’ bandwidth limitations. In this concept, the output signals of multiple DACs are interleaved in the frequency domain in order to generate a combined output signal that exceeds both the sampling rate and the bandwidth of a single DAC. In this paper, a mathematical framework for FI-DACs with a large number of DACs is presented and the inherent interdependencies between sampling rate, the number of samples, LO frequencies, symbol rate and analog frequency responses are highlighted. A mathematical expression for the distribution of data samples among the DACs is presented, taking into account bandwidth limitations of the analog components as well as guard bands to mitigate cross talk. In order to balance the FI-DAC’s parameters a mathematical optimization approach is introduced and illustrated with examples. Both simulation and experimental results validate the FI-DAC concept, and an outlook on implementation issues completes this paper.
2 July 2014 in Optics Express
In this contribution, we report on the experimental investigation of an ultra-dense wavelength-division multiplexing (UDWDM) upstream link with up to 700 × 2.488 Gb/s polarization-division multiplexing differential quadrature phase-shift keying parallel upstream user channels transmitted over 80 km of standard single-mode fiber. We discuss challenges of the digital signal processing in the optical line terminal arising from the joint reception of several upstream user channels. We present solutions for resource and cost-efficient realization of the required channel separation, matched filtering, down-conversion and decimation as well as realization of the clock recovery and polarization demultiplexing for each individual channel.
7 January 2019 in Journal of Lightwave Technology
In recent years, advanced modulation formats for short-range high-speed communications have been increasingly discussed to achieve the transmission rates needed to satisfy the future demand of broadband services. A key parameter in such applications is the use of low-cost optical components, which mainly means the use of intensity modulation (IM) and direct detection (DD) schemes. In order to exploit the available bandwidth offered by the latest optical components, high-speed data converters (DAC and ADC) are required. However, the available bandwidth of DACs and ADCs is generally smaller, than that of their optical counterparts, resulting in a capacity bottleneck. This issue can be addressed by bandwidth extension techniques, which enable the full use of the optical components. In this paper, two high-speed systems are presented and experimentally analyzed for an optical link based on IM/DD, utilizing a bandwidth extension technique based on electrical up/down-conversion and passive signal combining. The experiment for the first system uses two independent subsignals, with a total bandwidth beyond 40 GHz and enables transmission rates up to 180 Gb/s. Different aspects of the system are highlighted including general performance, transmission distance, use of different modulation formats, and the influence of important components. For the second system, the experiment consists of the generation of a spectrally continuous pulse amplitude modulation signal with the help of two subsignals and its transmission over an optical IM/DD link. The challenges and requirements for the hardware and software are discussed and the impact of power and phase mismatches between both subsignals is investigated as well.