Historically optical links up to 100–300m distances are served by light emitting devices in the 850 nm spectral range in combination with multimode glass fibers (MMF). As the silicon scaling continues, a single channel data rate is to double each 24 months. Light-emitting diodes had to be replaced by vertical cavity surface emitting lasers (VCSELs) and the data rate increased from 100 Mb/s to 10 Gb/s. At higher data rates problems with further scaling evolved. To avoid the collapse an anti-waveguiding VCSEL cavity design was invented, applied, and presently serves data links operating up to 50–100 Gb/s per channel. Another requirement in data communication is the bandwidth density scaling, with the number of channels per link increasing approximately 5-fold each 10 years, while keeping a similar space for connectors. A coarse short-wavelength division multiplexing allowing 850 nm, 880 nm, 910 nm, and 940 nm wavelengths in a single MMF is introduced. The bandwidth density increase is also possible by using multicore fiber (MCF) coupled to on-chip VCSEL arrays. The data rates up to 224 Gb/s are already reached by 850nm VCSELs. At such data rates significant transmission distance over MMF is only possible by applying ultra-narrow spectrum VCSELs minimizing the chromatic dispersion effects. On-chip mini-arrays of oxide-confined VCSELs allow a high coupling efficiency to MMFs, a narrow spectrum, a high power, a significant transmission distance at high data rates. Coherent lasing in such arrays allow photon-photon resonance engineering aimed at modulation bandwidths ∼50–100 GHz.
Successful 54 Gbit/s on–off keying (OOK) transmission over 2.2 km of multimode OM4 fibre is demonstrated. The decisive advantages of the single mode over multimode vertical cavity surface emitting laser (VCSEL) in transmission experiments are shown.
Oxide–confined vertical cavity surface emitting lasers (VCSELs) with anti–waveguiding AlAs–rich core presently attract a lot of attention. Anti–waveguiding cavity enables the maximum possible optical confinement of the VCSEL mode (“λ/2 design”), increases its oscillator strength and reduces dramatically the optical power accumulated in the VCSEL mesa regions outside the aperture. VCSEL designs are suggested that favor single transverse mode operation. Modeling including current–induced and absorption–induced overheating shows that the preference for the transverse fundamental mode persists up to 10 mA current at 5 µm aperture diameter. Error–free data transmission is realized up to 160 Gb/s in digital–multitone (DMT) format using single–mode anti–waveguiding VCSELs. The approach to single–mode anti–waveguiding VCSELs is extended over a broad spectral range realizing error–free high–speed data transmission at both 850 nm and 910 nm.
We have studied monolayer (ML) and submonolayer InAs insertions (1–0.08 ML) in a GaAs matrix by photoluminescence, photoluminescence excitation, and optical-reflectance spectroscopy. Linewidths of heavy-hole and light-hole exciton peaks as narrow as 0.15 meV are observed. A surprisingly high exciton oscillator strength, its weak dependence on the average thickness of the InAs layer, and the pronounced anisotropy and splitting of heavy- and light-hole exciton peaks are all revealed in the optical studies and are attributed to the formation of ordered arrays of InAs wirelike islands. Furthermore, from photoluminescence and reflectance-anisotropy measurements, we confirm that the wire arrays are elongated along the [011¯] direction.
23 October 2014 in IEEE Journal of Quantum Electronics
Properly designed oxide-confined vertical cavity surface emitting laser (VCSEL) allows leakage of the optical modes from the all-semiconductor core region to the selectively oxidized periphery if the orthogonality between the core mode and the modes on the periphery is broken by the oxidation-induced optical field redistribution. The leakage losses are stronger for high-order transverse modes, which have a higher field intensity close to the oxidized region. Single mode lasing in the fundamental mode can thus proceed up to large aperture diameters. The 850-nm GaAlAs thick oxide aperture VCSEL based on this concept is designed, modeled, and fabricated, showing single-mode lasing with the aperture diameters up to 5 μm. Side mode suppression ratio >20 dB is realized at the current density of ~10KA/Cm 2 in devices with the series resistance of 90 Ω.