10 January 2018 in Advanced Materials
1 March 2019 in APL Materials
In the inverted structure perovskite solar cells, a buffer layer is generally used at the interface between the n-type semiconductor layer and the metal electrode, but its design guidelines have not yet been established. Here, a series of inverted perovskite solar cells have been fabricated with the controlled thickness of bathocuproine (BCP) buffer layers deposited by thermal evaporation and validated the BCP buffer layer evaluation tool. The ideal factor was calculated from the gradient in the plot of Voc against the log of Jsc, and the effect of the BCP buffer layer on charge recombination was verified. Since the ideal factor greatly decreased from 5 to 1.4 by introducing the BCP buffer layer, it was confirmed that the interface between the n-type semiconductor layer and the metal electrode gradually changed from a Schottky barrier diode to an ohmic contact. On the other hand, it was found that an excessive BCP film thickness causes the series resistance to increase and induced recombination. Finally, as a result of optimizing the perovskite layer and the BCP buffer layer, respectively, the performance exceeding 17% was obtained. This study provides insight into the improvements in the conversion efficiency of perovskite solar cells by optimizing the thickness of the buffer layer using the ideal factor.
2 September 2018 in Advanced Functional Materials
17 July 2018 in ACS Applied Materials & Interfaces
16 October 2018 in ACS Energy Letters
11 November 2019 in Applied Physics Letters
The microstructure of the compact TiO2 (c-TiO2) layer formed by atomic layer deposition (ALD) was investigated for optimization of organometal halide perovskite solar cells (PSCs). The ALD c-TiO2 layer has an amorphous structure alleviating performance deterioration of the PSCs caused by defects. To apply the optimized ALD c-TiO2 layer to the PSCs, an efficiency of 18.36% was achieved. It is the top record among the PSCs using a compact TiO2 layer formed by ALD.