Oleksandr Sokol

Oleksandr Sokol

Auto-generated profile, based on publicly available information

Oleksandr Sokol

Дніпровський державний технічний університет, м. Кам'янське

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2021 in TECHNICAL SCIENCES AND TECHNOLOGIES
Verified
Journal Article
Open access
PDF file
AIAnna Ivanchenko
Anna Ivanchenko
DUDniprovsky State Technical University
Dniprovsky State Technical University
OSOleksandr Sokol
Oleksandr Sokol
DYDmytro Yelatontsev
Dmytro Yelatontsev
KLKonstantin Lyapka
Konstantin Lyapka
OROlena Revak
Olena Revak
The work aims to study the process of activation of natural zeolite by inorganic acids, in particular, HNO3and H3PO4to verify their effectiveness when extracting dyes from aqueous media in batch mode.It is proposed to use the method of purification with sorbents modified with mineral acids nitric, hydrochloric, and ortho-phosphate to increase the absorption capacity concerning water-soluble dyes. The analysis of the process of purification and neutralization of dyes in water systems with the help of zeolite of the Sokernyanskoye deposit was carried out experimentally. Chemical activation, which was carried out by the impregnation method, was used to improve the sorption properties. Samples of chemically activated zeolite were obtained. Due toacid activation, Al, K, Na, Ca, Mg, Fe ions are released, which release micro-and mesopores in the sorbent, which increases its porosity and improves sorption properties. The composition of activated natural mineral zeolite with HNO3, HCl, H3PO4acids were characterized. The chemical composition of activated zeolite was determined by X-ray fluorescence.The efficiency of acid-activated zeolite for the extraction of dyes from wastewater was tested. The dependences of the dye extraction process from model solutions using ordinary and acid-activated zeolite have been established. The dye content in the treated wastewater was determined by the photometric method. The kinetic regularities of the dye adsorption process during contact of natural and activated zeolite samples in the time interval every 6 h for 24 h have been established. It was found that the concentration of pollutants varies and depends on the type of acid and has a decisive influence on the obtained chemical properties of the modified samples.It is recommended to use zeolite activated with hydrochloric acid asa natural adsorbent at a dose of 4 g/dm3with a contact time of 24 hours. According to these technological parameters, the dye content in water decreases from 117 mg/dm3to 41 mg/dm3.The obtained results allow to significantly expand the knowledge about the areas of application of natural sorbents in various technological processes.

18 May 2026 in Ecology and Noospherology
Verified
Journal Article
Closed access
AIA. V. Ivanchenko
A. V. Ivanchenko
YGYu. I. Grytsan
Yu. I. Grytsan
OSO. D. Sokol
O. D. Sokol
VVV. V. Voronov
V. V. Voronov
The paper highlights the critical problem of waste disposal of the agro-industrial complex caused by the accumulation of significant volumes of lignocellulosic biomass. The insufficient level of processing of these wastes leads to their degradation in natural conditions with the formation of toxic products, which creates a significant environmental burden on water bodies, soils and the atmosphere. It is proposed to involve the waste of the agro-industrial complex for reuse by creating on their basis effective chemically modified sorbents for wastewater treatment. The proposed approach makes it possible to simultaneously reduce the man-made load on the environment and ensure the transition to the principles of a circular economy. Waste of plant origin, including walnut shells, fruit pits, corn cobs, and straw, were chosen as the objects of the study. The sorbents were obtained by chemical activation with orthophosphoric acid followed by heat treatment under conditions of limited access to oxygen. The effectiveness of the materials was evaluated in the processes of cleaning aqueous solutions from organic dyes by spectrophotometric methods. As a result of research, it was established that the obtained sorption materials are characterized by the ability to extract dyes of various nature. The degree of purification of model solutions reaches 68 % for methylene blue and 61 % for methyl orange with an optimal contact time of 90 min. The sorption process is caused by a set of physicochemical interactions, including hydrogen bonding, electrostatic interaction, and ion exchange involving the functional groups of the sorbent surface. It was found that after reaching the maximum level of purification, there is a slight increase in the residual concentration of pollutants, which is explained by the establishment of adsorption-desorption equilibrium and the saturation of active centers. In addition, the possibility of complex processing of by-products of the activation process by using them to obtain phosphorus-containing mineral fertilizers is substantiated. This makes it possible to increase the efficiency of the use of resources and reduce the environmental burden. The obtained results confirm the expediency of using waste from the agro-industrial complex as a raw material for the creation of effective sorption materials and their use in wastewater treatment technologies.

6 June 2024 in Collection of scholarly papers of Dniprovsk State Technical University (Technical Sciences)
Verified
Journal Article
Open access
PDF file
OSOleksandr Sokol
Oleksandr Sokol
AIAnna Ivanchenko
Anna Ivanchenko
АІА.в. Іванченко
А.в. Іванченко
The study addresses the pressing issue of obtaining new sorbents from plant raw materials and their use for purifying water systems containing hazardous dyes. In the research, the method of chemical kiloton activation is applied to acquire new sorbents, and its advantages are outlined. Three samples of sorbents were obtained: a lignocellulosic sorbent based on walnut shell, which underwent no treatment with chemical reagents; the second sample was obtained by treating a lignocellulosic raw material with a 65 % solution of nitric acid (HNO3); the third sample - with a 65 % solution of acetic acid (CH₃COOH). The chemical activation of sorbents was carried out by the impregnation method in a water bath and rinsing with distilled water until reaching pH = 7—8, followed by gradual drying, initially at temperatures of 60—65 °C, then at 100—105 °C for 1—2 hours, and finally at 125—130 °C until a constant mass was achieved. At the last stage, the material was ground, selecting fractions of 10 mm in size. The prepared sorbents were tested for their efficiency in removing methyl orange dye from model solutions. A comparative analysis of sorbent samples regarding dye removal from model solutions was conducted. It was found that the use of chemically activated lignocellulosic sorbent with acetic acid (CH₃COOH) solution is more effective compared to nitric acid (HNO3) and non-activated sorbent. The optimal consumption rate of kiloton-activated lignocellulosic sorbent was found to be 1.5 g/dm3, with a purification efficiency of 80 %. The optimal contact time of the lignocellulosic sorbent with the adsorbate is 20 hours. The influence of temperature on the dye sorption process was investigated in the range from 291 to 303 K. Increasing the temperature to 303 K resulted in achieving a purification efficiency of 86 %. У роботі розглянуто актуальне питання одержання нових сорбентів із рослинної сировини і їх використання для очищення водних систем, які містять небезпечні барвники. В дослідженнях для отримання нових сорбентів застосовано метод хімічної активації, наведено його переваги. Одержано три зразки сорбентів: лігноцелюлозний сорбент на основі шкарлупи волоського горіха, який не піддавався жодній обробці хімічними реагентами; другий зразок — 65 % розчином нітратної кислоти HNO3; третій зразок — 65 % розчином оцтової есенції CH₃COOH. Готові сорбенти були випробувані на ефективність вилучення барвника метилового оранжевого з модельних розчинів. Встановлено оптимальну витрату сорбенту, яка становить 1,5 г/дм3, ефективність очищення — 80 %. Оптимальний час контактування: 20 годин. Вивчено вплив температури на процес сорбції барвника.