31 March 2021 in IEEE Transactions on Electron Devices
Leveraging laser-induced graphene (LIG) in various flexible polymer electronics applications is becoming tremendously popular. LIG is porous multilayer graphene generated by a single-step process using infrared CO₂ laser onto the carbon-based polymers. In this article, a direct LIG printed microstrip patch antenna operating at the 5.8-GHz unlicensed band is presented. Based on simulations, the proposed design exhibited the desired unidirectional radiation characteristics with a measured gain of 1.82 dBi at the resonant frequency. The LIG-based rectangular patch was printed using the CO₂ laser by selective reduction of polyimide (PI) sheet. The chemical properties of LIG were examined using various structural and morphological characterization techniques, which confirmed the formation of multilayer graphene. The sensitivity of the patch antenna was analyzed for measuring strain and its effect on LIG. By harnessing LIG on flexible material such as PI sheet, the antenna exhibited a threshold increase in sensitivity. The proposed sensor shows a sensitivity of 14.08 and 11.34 for compressive and tensile strain, respectively. Inspired by the significant sensitivity, the fabricated device has been examined for human motion monitoring by attaching it to the human hand for practical usage in real-time applications. The proposed antenna-based sensor reduces the number of components by eliminating external wiring and onboard battery. Moreover, it serves as both the sensing and wireless data transmitting element. Overall, this work demonstrates designing a compact, easy-to-fabricate, sensitive, and flexible antenna-based Internet of Things (IoT) sensor for motion detection, structural health monitoring, and industrial strain sensing applications.
1 June 2024 in Flexible and Printed Electronics
A miniaturized sixteenth-mode nanomaterial-based flexible substrate-integrated waveguide (SIW) antenna is demonstrated at an operating frequency of 3.5 GHz. The antenna is designed based on the one-sixteenth mode of a circular SIW cavity. The SIW in this instance is manufactured exclusively with flexible non-textile materials, which makes it unique and novel from the other reported works. The substrate of the proposed antenna is manufactured using PDMS by masking and laser cutting process. The patch on the substrate is made of a 2D nanomaterial MXene, whereas the ground at the bottom is created using copper tape. Vias connecting the patch and ground were filled with silver paste and dried at 80 °C in an oven. With a compact design and flexibility, the proposed flexible SIW antenna offers a unidirectional radiation pattern with a reasonable gain of −3.39 dBi at a 3.5 GHz resonant frequency. Additionally, the antenna is demonstrated for its flexible performance by straining it to the maximum extent without any structural damage. Consequently, the presented flexible SIW antenna can be well suited for conformal wireless applications.