In this study, the effects of NaOH and precursor concentration on the particle size and magnetic properties of FeCo nanoparticles are investigated. Results suggest that an optimized ratio of NaOH molar concentration [OH] to precursor molar concentration [M] is required to obtain a small particle size, high saturation magnetization, and low coercivity. When the [OH]/[M] ratio was greater than 40, the FeCo nanoparticles aggregated, whereas when the [OH]/[M] ratio was less than 20, FeCo + CoFe2O4 nanoparticles were obtained due to unstable reduction reactions. When [OH]/[M] was 40, the 387 nm FeCo nanoparticles showed the highest saturation magnetization and lowest coercivity, which are the best conditions for achieving high permeability. In contrast, the complex permeability of the 173 nm FeCo nanoparticles was higher than that of the 387 nm FeCo nanoparticles owing to the decrease in the demagnetization effect in the high frequency band. This confirmed that the particle size had a greater effect on the complex permeability than that on the saturation magnetization and coercivity in GHz ranges.
This paper proposes dual-functional sheets (DFSs) that simultaneously have high thermal conductivity (TC) and electromagnetic interference (EMI) absorbing properties, making them suitable for use in mobile electronics. By adopting a simple but highly efficient dry process for manufacturing core–shell structured fillers (CSSFs) and formulating a close-packed filler composition, the DFSs show high performance, TC of 5.1 W m−1 K−1, and a −4 dB inter-decoupling ratio (IDR) at a 1 GHz frequency. Especially, the DFSs show a high dielectric breakdown voltage (BDV) of 3 kV mm−1, which is beneficial for application in most electronic devices. The DFSs consist of two kinds of CSSFs that are blended in accordance with the close-packing rule, Horsfield’s packing model, and with polydimethylsiloxane (PDMS) polymers. The core materials are soft magnetic Fe-12.5%Cr and Fe-6.5%Si alloy powders of different sizes, and Al2O3 ceramic powders of a 1-μm diameter are used as the shell material. The high performance of the DFS is supposed to originate from the thick and stable shell layer and the maximized filler loading capability owing to the close-packed structure.
15 July 2021 in Journal of Materials Science: Materials in Electronics