13 January 2015 in IEEE Transactions on Industry Applications
This paper proposes a technique for reducing the leakage current flowing into a power source as a conducted noise. This leakage current may have an adverse effect on the peripheral equipment, e.g., causing malfunctions. The proposed technique requires us to add a zero-sequence voltage to the output voltage reference of the inverter. The zero-sequence voltage can be controlled without affecting the driving characteristics of the motor. In a motor drive range, a counter electromotive force increases with an increase in the motor speed. The proposed technique, therefore, controls the zero-sequence voltage as a function of the inverter output frequency; as a result, a stable motor drive and reduction in the common-mode current are realized simultaneously. Simulation and experimental results prove the validity of the proposed technique.
23 March 2023 in IEEE Transactions on Power Electronics
Motor acoustic noise generated near living environments, such as elevators and electric vehicles, may cause discomfort. In order to reduce the acoustic noise, the switching frequency is set to the high side of the audible frequency range. In this case, however, the switching loss is increased. The conventional discontinuous pulsewidth modulation (DPWM) method is widely used since it can reduce the switching loss drastically. However, it produces larger acoustic noise than the conventional sinusoidal pulsewidth modulation method. The authors have previously proposed “Rampwise DPWM technique,” which can reduce both acoustic noise and switching loss. In this article, the line–line voltage with the proposed Rampwise DPWM technique is expanded into a real-valued Fourier series, and the frequency characteristics are analyzed. It is theoretically confirmed that the rampwise part in the Rampwise DPWM technique can achieve the reduction of motor acoustic noise. Furthermore, the reduction effect of motor acoustic noise with the Rampwise DPWM technique is theoretically and experimentally verified.
1 January 2012 in IEEJ Transactions on Industry Applications
1 January 2017 in IEEJ Transactions on Electronics, Information and Systems
1 January 2013 in IEEJ Transactions on Industry Applications
1 January 2017 in IEEJ Transactions on Industry Applications