Mingchao Yang

Mingchao Yang

Auto-generated profile, based on publicly available information

Mingchao Yang

School of Microelectronics, Xi'an Jiaotong University 1 , Xi'an 710049

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZGZhaoyuan Gu
Zhaoyuan Gu
MYMingchao Yang
Mingchao Yang
YYYi Yang
Yi Yang
XLXihao Liu
Xihao Liu
MGMingyang Gao
Mingyang Gao
YHYue Hao
Yue Hao
For 4H-SiC mosfet s, the parasitic PiN body diode causes problems such as significant forward voltage drop of body diode and poor reverse recovery characteristics during high-temperature operation. A reasonable solution is a mosfet with an integrated Schottky barrier diode to deactivate the PiN body diode. Since SiC mosfet s can operate at extremely high temperatures, the characterization of electrical parameters at high temperatures and changing with the temperature are very important for high power applications and system reliability. However, there is a lack of comparison and analysis of the two devices on electrical properties at ultrahigh temperatures. In this article, a 1.2 kV conventional mosfet and a mosfet integrated with a junction barrier Schottky diode (JBSFET) were fabricated with a consistent process flow. In the temperature range from 300 to 575 K, analytical models of the temperature-dependent electrical parameters of these two devices were established and compared, which were successfully verified by the measurements. These models can provide guidance for ultrahigh temperature applications of JBSFETs. Temperature-related expressions can also be used for junction temperature monitoring of temperature-sensitive electrical parameters. Experimental results show that JBSFET has better third quadrant conduction characteristics and higher temperature stability below 450 K, but loses obvious performance advantages at 575 K. So, the recommended operating temperature range of JBSFET is from 300 to 450 K. Finally, the continuous operation performance of the body diodes in buck converters is analyzed. The higher efficiency of buck converter based on JBSFET's body diode indicates its great application potential in compact converters, especially in the recommended temperature range.

8 October 2024 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
ZGZhaoyuan Gu
Zhaoyuan Gu
MYMingchao Yang
Mingchao Yang
YYYi Yang
Yi Yang
WLWeihua Liu
Weihua Liu
C. Y. HanC. Y. Han
C. Y. Han
YHYue Hao
Yue Hao
In this article, a 1.2-kV conventional MOSFET and a MOSFET integrated with a junction barrier Schottky diode (JBSFET) were fabricated with a consistent process flow. The electrical characteristics of MOSFET and JBSFET, including static performance, structural capacitance, and switching performance have been systematically analyzed in the temperature range of 80–300 K. Experimental results show that the third quadrant voltage drop of JBSFET is smaller than MOSFET and hardly changes with decreasing temperature. The gate-drain capacitance of MOSFET and JBSFET increases by more than 50% at 80 K, due to the cryogenic incomplete ionization of the P-Base. The switching performance of the two devices is affected by the temperature dependence of threshold voltage, structural capacitance, and interface state charges, manifesting in a reduction in turn-on speed and voltage tailing at cryogenic temperatures. According to the results, JBSFET has better potential for low-temperature applications due to its stable third-quadrant characteristics. The cryogenic incomplete ionization of the P-Base region has a significant impact on the output characteristics, structural capacitance, and switching performance.

12 July 2024 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YYYi Yang
Yi Yang
MYMingchao Yang
Mingchao Yang
ZGZhaoyuan Gu
Zhaoyuan Gu
SYSongquan Yang
Songquan Yang
C. Y. HanC. Y. Han
C. Y. Han
YHYue Hao
Yue Hao
Degradation of SiC power mosfet s under repetitive short-circuit (SC) stress is significant to the reliability of the power systems. A deep level transient spectrum method together with split C-V method to split the trap characteristics of the SiC mosfet s is proposed. The degradation details of different locations in SiC planar gate (PG) and trench gate (TG) mosfet s are comprehensively studied in this article. Thus, a criterion is provided to guide the SC degradation from the aspect of traps. The main degradation of the channel region is the increase of border traps for PG mosfet and newly generated interface traps for TG mosfet . The interface traps domain the degradation in the JFET region for both devices. The degradations of gate oxide for both devices affect the channel and JFET regions especially in the first set of SC cycles. The degradation of body diode is mainly influenced by hole traps in PG mosfet , but by electron traps first then hole traps newly generated in TG mosfet . Finally, the degradation locations of PG and TG mosfet s are effectively characterized. It is the first time to use the trap measurement method to separate the different degradation in every part of the devices in detail. The method proposed in this article can better reflect the failure mechanisms related to dynamics and evaluate the operation of devices effectively, which provides very useful guidance for the reliability design and utilization of SiC mosfet s.

14 November 2025 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
MLMing Li
Ming Li
MYMingchao Yang
Mingchao Yang
LZLeidang Zhou
Leidang Zhou
ZWZhang Wen
Zhang Wen
WLWeihao Liu
Weihao Liu
YHYue Hao
Yue Hao
This study presents a vertical (001) β-Ga2O3 Schottky barrier diode (SBD) incorporating a composite edge termination structure, which combines a nitrogen-implanted guard ring (GR) with a small-angle beveled field plate (BFP). Leveraging technology computer-aided design simulations grounded in semiconductor physics, we developed and optimized the device's geometric structure. Integration of GR with BFPs enables suppression of the anode-edge electric-field peak without degrading the favorable forward conduction characteristics. Thanks to this optimized termination design, the fabricated diode achieves a breakdown voltage (Vbr) of 2.3 kV—6.5 times higher than that of nonterminated devices—along with a specific on-resistance (Ron,sp) of 3.19 mΩ cm2. These properties yield a high Baliga's figure of merit of 1.71 GW/cm2. Furthermore, at a reverse bias of −1500 V, the device demonstrates a low leakage current density of less than 1 μA/cm2. This work presents a feasible approach to improve the performance of β-Ga2O3 SBDs, paving the way for their adoption in power electronics.

31 March 2026 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
PDF file
PZPuyu Zhai
Puyu Zhai
YSYushan Song
Yushan Song
LCLiang Chen
Liang Chen
MYMingchao Yang
Mingchao Yang
LZLeidang Zhou
Leidang Zhou
XOXiao-ping Ouyang
Xiao-ping Ouyang
This study investigated heavy-ion irradiation effects on Al2O3/beta-gallium (β-Ga2O3) metal-oxide-semiconductor capacitors (MOSCAPs), which serve as essential building blocks for metal-oxide-semiconductor field effect transistors (MOSFETs), and evaluated the restorative efficacy of N2O-based supercritical fluid (SCF) treatment. Following tantalum (Ta) ion irradiation at a cumulative fluence of 4 × 107 ions/cm2, the net carrier concentration (Nd) degraded from 2.91 × 1016 to 1.92 × 1016 cm−3. The interface state density (Dit) and interface oxide trap charge density (Niot) exhibited a slight decrease due to heavy-ion-induced defect restructuring, while the effective oxide charge density (Neff) declined from 4.22 × 1011 to 3.87 × 1011 cm−2 via electron capture by oxygen vacancies in the oxide layer. Irradiation-induced latent tracks and a reduction in trap energy level (φt) from 1.72 to 1.62 eV led to a tenfold increase in leakage current and reduced breakdown voltage, with trap-assisted tunneling identified as the dominant transport mechanism. To mitigate these effects, N2O-based SCF treatments were employed to achieve recovery through mild nitridation and oxygen compensation. Initial SCF treatment increased φt to 1.78 eV, though persistent latent tracks limited the restoration of leakage characteristics. Subsequent SCF treatments further suppressed leakage current primarily by reducing electrically active trap density and passivating track-associated defects, despite a marginal decline in φt. Recovery saturation and Neff polarity reversal were observed during prolonged exposure, indicating complex charge dynamics. These findings elucidated heavy-ion damage physics in Al2O3/β-Ga2O3 MOS structures and defined SCF operational boundaries, providing a critical reference for predicting the operational lifetime of future radiation-tolerant MOSFETs.

10 September 2025 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Closed access
MLMing Li
Ming Li
MYMingchao Yang
Mingchao Yang
LZLeidang Zhou
Leidang Zhou
ZWZhang Wen
Zhang Wen
WLWeihao Liu
Weihao Liu
YHYue Hao
Yue Hao
This study presents a comprehensive investigation into the impact of supercritical fluid (SCF) N2O treatment on β-Ga2O3 Schottky barrier diodes (SBDs). Capacitance-voltage (C-V) analysis indicates a marginal reduction in the carrier concentration within the β-Ga2O3 drift layer post-SCF treatment. Remarkably, the treated SBDs exhibit substantial electrical enhancement: breakdown voltage surges from 355 to 551 V, reverse current density plunges by approximately two orders of magnitude, and Baliga’s figure of merit improves by 92.8%. Temperature-dependent forward current-voltage measurements further demonstrate superior high-temperature operational stability in SCF-processed devices. Crucially, frequency-dependent conductance measurements reveal a significant decrease in interface state density, from 2.62 × 1012–1.14 × 1013 cm−2 eV−1 to 8.5 × 1011–3.30 × 1012 cm−2 eV−1, alongside reduced trap activation energy (from 0.211–0.220 to 0.209–0.220 eV). These findings establish SCF treatment as a potent technique for interfacial engineering and performance optimization in β-Ga2O3 SBDs.