10 February 2023 in IEEE Transactions on Biomedical Engineering
Objective: Hemorrhagic stroke is a leading threat to human's health. The fast-developing microwave-induced thermoacoustic tomography (MITAT) technique holds potential to do brain imaging. However, transcranial brain imaging based on MITAT is still challenging due to the involved huge heterogeneity in speed of sound and acoustic attenuation of human skull. This work aims to address the adverse effect of the acoustic heterogeneity using a deep-learning-based MITAT (DL-MITAT) approach for transcranial brain hemorrhage detection. Methods: We establish a new network structure, a residual attention U-Net (ResAttU-Net), for the proposed DL-MITAT technique, which exhibits improved performance as compared to some traditionally used networks. We use simulation method to build training sets and take images obtained by traditional imaging algorithms as the input of the network. Results: We present ex-vivo transcranial brain hemorrhage detection as a proof-of-concept validation. By using an 8.1-mm thick bovine skull and porcine brain tissues to perform ex-vivo experiments, we demonstrate that the trained ResAttU-Net is capable of efficiently eliminating image artifacts and accurately restoring the hemorrhage spot. It is proved that the DL-MITAT method can reliably suppress false positive rate and detect a hemorrhage spot as small as 3 mm. We also study effects of several factors of the DL-MITAT technique to further reveal its robustness and limitations. Conclusion: The proposed ResAttU-Net-based DL-MITAT method is promising for mitigating the acoustic inhomogeneity issue and performing transcranial brain hemorrhage detection. Significance: This work provides a novel ResAttU-Net-based DL-MITAT paradigm and paves a compelling route for transcranial brain hemorrhage detection as well as other transcranial brain imaging applications.
2 March 2023 in IEEE Transactions on Microwave Theory and Techniques
Quantitative reconstruction of dielectric properties has enabled a wealth of biomedical applications. Although traditional microwave imaging and microwave-induced thermoacoustic tomography (MITAT) techniques have been widely explored for quantitative reconstruction, it is still highly challenging for them to deal with biological samples with high permittivity and conductivity. This work leverages deep-learning-enabled MITAT (DL-MITAT) approach to quantitatively reconstruct dielectric properties of biological samples with high quality. We construct a new network structure to separately reconstruct the permittivity and conductivity. By simulation and experimental testing, we demonstrate that the DL-MITAT technique is able to reliably reconstruct inhomogeneous biological samples with tumor, muscle, and fat. The experimental reconstruction error is only 5%. The network exhibits excellent generalization capability in terms of sample’s geometry. This work provides a useful paradigm and alternative way for quantitative reconstruction of dielectric properties and paves the way toward practical applications.
18 April 2023 in IEEE Sensors Journal
Microwave-induced thermoacoustic tomography (MITAT) is a novel noninvasive method for biomedical applications like imaging and cancer detection. Recently, compressive sensing has been applied in MITAT, denoted as compressive thermoacoustic tomography (CTAT), can greatly reduce the number of measurements while maintain the image quality. This work reports the study on the effect of distribution of transducer array on image quality in CTAT for the application of breast tumor detection. Different distributions are tested by both simulation and experimental works to compare the quality of imaging. Three breast samples made of pork fat containing tumor-mimicking phantoms are used as the object to evaluate the effect of distribution of transducer array on image quality through the experiment. The results show that the transducer array which distributed evenly on a hemisphere surface is able to achieve an excellent image reconstruction result that is better than other tested types of transducer array distribution. This work gives a faithful guidance on the distribution strategy of transducer array for CTAT in breast tumor detection and other potential applications.
16 August 2024 in IEEE Transactions on Microwave Theory and Techniques
Microwave-induced thermoacoustic tomography (MITAT) is a noninvasive hybrid modality that has been widely applied in a bunch of biomedical applications. MITAT integrated with cutting-edge deep learning (DL-MITAT) technique is highly promising for tackling many challenging problems that cannot be efficiently solved by traditional methods. However, the previous MITAT or DL-MITAT works rarely consider the realistic properties of the utilized ultrasound transducer, which can significantly degrade the image quality in some application scenarios. To address this issue, we propose a DL-MITAT technique applying realistic properties of ultrasound transducers (referred to as DL-MITAT-PoT), which is very effective for imaging large or long samples. To be specific, the previous related works simply assume an omnidirectional receiving pattern of the transducer. Instead, we take into account the limited receiving angle of a realistic transducer in the DL-MITAT-PoT technique to improve the imaging performance. To implement this technique, we incorporate the receiving properties of a realistic transducer into the training process of the ResU-Net network. We test the trained network by imaging several 2-mm-diameter long blood-vessel-mimicking samples via both simulations and experiments. The obtained imaging results demonstrate that the proposed DL-MITAT-PoT yields much better imaging quality than its counterpart without considering the property of the transducer. We show that the network trained using complicated vessel sample data is endowed with downward compatibility for samples having less complexity. This technique greatly improves the image quality for dealing with large or long samples and has a promising prospect in many biomedical applications.
1 December 2016 in Journal of the Computational Structural Engineering Institute of Korea