1 January 2023 in Brazilian Dental Journal
The purpose of this study was to evaluate and measure the microleakage inhibiting quality of provisional restorations manufactured using computer-aided manufacturing, 3D printing, and chairside molded provisional restorative materials. Fifteen provisional restorations each from 3D printed, milled, and chairside molded were manufactured. All restorations were cemented onto sintered zirconia abutment dies and adhered with zinc-oxide non-eugenol temporary cement. Artificial aging was conducted by thermocycling for 800 cycles to simulate 1 month of clinical use. All specimens were submerged in 2% (w/w) methylene blue for 24 hours at 37°C, sectioned, and analyzed digitally for the distance of dye penetration through image analysis. The data were analyzed using the Kruskal-Wallis test with Dunn-Bonferroni post-hoc. Significant differences in dye penetration depth were observed between all groups except milled vs chairside molded. Light microscopy revealed differences in mean cement thickness for 3D printed, milled, and chairside molded of 83.6 µm (1σ = 31.9 µm), 149.1 µm (1σ = 88.7 µm) and 137.9 µm (1σ = 67.2 µm) respectively. Conclusion: 3D printed provisional restorations were found to have the least amount of microleakage compared to milled and chairside molded provisional restorations.
1 January 2025 in International Journal of Dentistry
Objective: Bonded onlay preparations provide minimal guidance during cementation, which may compromise seating accuracy and increase marginal and internal discrepancies, potentially affecting restoration longevity. This study aims to assess whether a modified preparation (MP) design improves onlay positioning during cementation to enhance marginal and internal fit. Materials and Methods: The conventional preparation (CP) design was prepared on a typodont tooth, scanned, and replicated ( n = 20). A cross‐shaped groove was added to the prepared typodont tooth to create the MP design, then scanned and replicated ( n = 20). For both groups, a restoration was designed using computer‐aided design (CAD) and computer‐aided manufacturing (CAM). Each onlay was three‐dimensionally (3D) printed, assessed for fit, and then bonded onto the replicas. Ten specimens from each group were sectioned horizontally and 10 vertically. Absolute marginal discrepancy (AMD) and internal cement thickness (ICT) were measured on the horizontally and vertically sectioned specimens under a stereomicroscope. Data were analyzed using the Mann–Whitney U test ( α = 0.05). Results: The MP showed a statistically significant lower mean AMD than the CP at the palatal ( p = 0.035) and buccal ( p = 0.006) sites. However, there was no statistically significant difference at the mesial site ( p = 0.193). The CP had a statistically significant lower ICT than the MP in the vertical section ( p = 0.009), but the difference in the horizontal section was not statistically significant ( p = 0.121). Conclusions: The MP improved AMD compared to the CP at buccal and palatal sites, but increased ICT in the vertical section. Clinical Significance: The MP design showed that a minor modification to the conventional bonded onlay preparation design improved AMD but increased ICT. These findings guide clinicians in selecting optimal designs to improve restoration adaptation and longevity.
1 April 2025 in Journal of Biomedical Materials Research Part B: Applied Biomaterials
Biofilm accumulation can lead to enamel decalcification, gingivitis, and periodontal disease. The objective of this study was to compare the accumulation of biofilm under in vivo conditions and consequent ex vivo acid production and enamel demineralization around the material used for “off‐the‐shelf” conventional and CAD/CAM orthodontics bands. The study design required both in vivo and in vitro approaches. An experimental model was utilized to combine the exposure of an in vivo formed biofilm to in vitro cariogenic conditions to achieve the objective. Twenty‐one consenting participants took part in this study. Participants wore custom intraoral appliances containing six bovine enamel discs (three on each maxillary arch) for 48 h. Tiles made from conventional stainless steel bands (SS tiles group), CAD/CAM tiles made of Sintron cobalt‐chromium (CoCr) sinter metal (Sintron tiles group), and no tile (control group) were randomly assigned to disc positions such that each appliance contained two tiles from each group (126 tiles in total). Participants immersed the appliances in sucrose solution (10% w/v) for 5 min, five times per day. After 48 h, appliances were removed, the discs were recovered, and incubated in glucose (1%)/PBS for 24 h. The pH of the glucose/PBS measured the relative acid produced by the accumulated biofilm, and calcium released from the discs quantified demineralization. Disclosing dye was used to stain and delineate the biofilm before each disc was digitally photographed and analyzed to determine the biofilm coverage. The mean biofilm coverage ranged between 0% and 86% (mean 9.63%) of disc surface area, but there was no difference in biofilm coverage between tile groups or between tile positions. Significantly less acid was generated by the control discs biofilms (mean pH 5.06) than either SS or CAD/CAM tiles biofilms (pH 4.72 and 4.84, respectively), which were not different from one another. Position on the appliance did not affect acid production. Control discs experienced greater demineralization (mean 136 μg Ca/disc) than either the SS (122 μg Ca/disc) or Sintron (114 μg Ca/disc) tile groups, which suffered equivalent demineralization. Position on the appliances did not influence demineralization. The study provides no evidence that CAD/CAM‐designed components of orthodontic bands are more beneficial than conventional bands in terms of biofilm accumulation and consequent caries risk.