20 July 2020 in Scientific Data
This paper describes the release of the detailed building operation data, including electricity consumption and indoor environmental measurements, of the seven-story 11,700-m2 office building located in Bangkok, Thailand. The electricity consumption data (kW) are that of individual air conditioning units, lighting, and plug loads in each of the 33 zones of the building. The indoor environmental sensor data comprise temperature (°C), relative humidity (%), and ambient light (lux) measurements of the same zones. The entire datasets are available at one-minute intervals for the period of 18 months from July 1, 2018, to December 31, 2019. Such datasets can be used to support a wide range of applications, such as zone-level, floor-level, and building-level load forecasting, indoor thermal model development, validation of building simulation models, development of demand response algorithms by load type, anomaly detection methods, and reinforcement learning algorithms for control of multiple AC units.
4 November 2019 in IEEE Internet of Things Journal
With the development of the Internet of Things (IoT) technologies, implementing intelligent controls in buildings to reduce energy consumption is becoming increasingly popular. Building climate control is of strong research interest due to high energy savings potentials associated with heating, ventilation and air-conditioning (HVAC) controls. Because the operation of HVAC systems directly influences occupant thermal comfort, building-specific thermal models are needed for proper control. Such models describe how indoor temperature changes under different environmental conditions and HVAC status. Previous studies mainly developed thermal models for accurate building thermal simulation which are not practical for use in real-world applications as they require domain knowledge and lengthy building-by-building configuration. In this paper, taking advantage of IoT technologies, a plug & play learning framework is proposed to automatically identify the thermal model of each thermal zone in a building without manual configuration. In contrast to the existing methods, a thermal model is learnt using low-resolution temperature readings from IoT-based smart thermostats. The learning framework has been validated using data collected from an IoT platform installed in a building over a summer. The performance of the learnt model and the error of indoor temperature prediction based on this model have been evaluated and quantified. Findings demonstrate the learning process can be automated with either edge-computing or cloud-computing. This study shows the validity of the proposed IoT-based thermal model learning framework, and offers a pragmatic solution for providing reliable thermal models to future smart building climate controls.
1 June 2007 in 2007 IEEE Power Engineering Society General Meeting
The electric power system is an enabling infrastructure that supports the operation of other critical infrastructures and thus the economic well-being of a nation. It is, therefore, very important to design for resiliency and autonomous reconfigurability in the electric power grid to guard against man-made and natural disasters. One way to assure such self-healing characteristics in an electric power system is to design for small and autonomous subsets of the larger grid. This paper presents the concept of a specialized microgrid called an intelligent distributed autonomous power system (IDAPS). The IDAPS microgrid aims at intelligently managing customer-owned distributed energy resources such that these assets can be shared in an autonomous grid both during normal and outage operations. The proposed concept is expected to make significant contributions during emergency conditions, as well as creating a new market for electricity transaction among customers.
1 July 2019 in IEEE Internet of Things Journal
Due to the depletion of energy resources and increased energy demand, there is an increased focus on the energy consumption and management in buildings. Many building energy management (BEM) software platforms are commercially available to monitor and control energy consumption. These platforms are hosted on the physical hardware within the building, due to which the hardware specifications limit their performance. To address this limitation, cloud technology emerged which facilitates software to be deployed at a remote location that has scalable hardware resources. Conventional BEM software can leverage such a cloud platform to offer scalable and maintenance-free installation. Once hosted on a remote cloud platform, BEM software lacks direct connectivity to building sensors/controllers, hence requires a device to support remote accessibility. Most devices are bound to a local area network and therefore need an additional functional layer on top of its communication stack to perform Network Address Translation (NAT)-Traversal. This functionality is implemented on a scalable software which connects to the devices in the network and acts as a gateway for cloud-based BEM software to access devices in the local area network. Any message sent to this gateway is translated to a respective device protocol. This paper describes the design and implementation of such an Internet of Things (IoT) gateway for a cloud-based BEM system that requires support for BACnet, Modbus, and HTTP RESTful interface devices.
18 November 2022 in Electrical Engineering
8 October 2019 in IEEE Transactions on Smart Grid
Residential HVAC control is a large untapped resource for providing regulation services to the grid. This paper presents a set of algorithms for controlling HVACs of a group of residential houses that a demand response aggregator can use to sell regulation service in the wholesale market. The focus is on the regulation market offered by the PJM RTO. Real-world regulation signals from PJM are used to simulate the performance and range of regulation services in a realistic scenario. After presenting the empirical counter example for why a universal optimal control strategy cannot exist for regulation, a set of heuristic algorithms is presented, which performs well in a range of test cases. The control mechanism involves a central controller communicating with smart thermostats of multiple residential houses to gather indoor temperature data, prioritizing them according to certain heuristics and sending on/off signals back to the thermostats to control the HVAC. The case studies indicate that the proposed heuristic algorithms can deliver the required regulation services, while adequately handling communication delays, different types of regulation signals and household’s thermal comfort requirements.