The article reports the results of the studies on the effect of nano‐titanium dioxide (TiO2) on the morphology, thermal, and mechanical properties of 1:1 starch/polyvinyl alcohol (PVA) composites. Degree of crystallinity of the starch/PVA blends increases with increase in the amount of nano‐TiO2 as determined by differential scanning calorimeter and X‐ray diffraction studies. Results of stress–strain studies indicate an increase in the tensile properties and a decrease in the percentage of elongation and energy at break particularly at higher amount of nano‐TiO2. Increase in peak width in the differential thermogram plot for the maximum decomposition temperature is indicative of increased blend heterogeneity in the presence of nanofillers. The degree of swelling in water decreases with increase in filler loading due to filler–matrix bonding.
4 July 2012 in Journal of Polymers and the Environment
This study details about the synthesis of micro-crystalline cellulose prepared from olive pits, the waste material obtained in olive industry, and the effect of these fillers on the tensile and thermal properties of polyvinyl alcohol/starch blends. Micro-crystalline cellulose from olive pits was prepared, and its size was measured using particle size analyzer. Composites were prepared for various micro-crystalline cellulose loading (0, 1, 3, and 5 wt.%) by solution casting method for the blend ratio of 70/30, respectively. Glycerol (3.78 g) was used as plasticizer in all formulations. Universal testing machine, thermogravimetric analyzer, differential scanning calorimeter, X-ray diffractometer, and scanning electron microscopy were used to study the tensile, thermal, and surface morphology of these bio-composites. Results indicated an increase in the tensile properties especially the Young's modulus from 100 to 180 MPa for composites having 1 wt.% of micro-crystalline cellulose and the same formulation showed higher thermal stability.