We present the preliminary development and characterization of a superconducting thermal switch designed to modulate the thermal response of cryogenic bolometers. The device uses an aluminum thermal link whose conductance is modulated by a niobium control coil. Initial measurements confirm the feasibility of the switching principle and demonstrate dynamic operation at least up to 50 kHz. These early results indicate that this approach can shift the signal spectrum away from 1/f noise, with ongoing efforts focused on integration with bolometric sensors and optimizing device geometry.
25 February 2026 in IEEE Transactions on Applied Superconductivity
Microwave SQUID multiplexers (μMUX) have become a key technology for the readout of large arrays of low-temperature detectors, particularly in cosmic microwave background experiments. A critical element of this technique is the flux-ramp modulation signal, whose noise, especially at low frequencies, directly limits the readout performance. This work proposes and experimentally demonstrates the use of a Josephson Arbitrary Waveform Synthesizer (JAWS) as a low-noise, high precision source for generating the sawtooth-shaped flux-ramp signal required in μMUX readout systems. The JAWS, based on the AC Josephson effect, provides intrinsically quantized and spectrally pure waveforms with excellent signal-to-noise ratio. The operation of a 9000-junction JAWS array is characterized and integrated with a cryogenic μMUX device and a custom SDR-based readout system. With this setup, the noise floor level around the harmonic typically used for phase demodulation of the SQUID signal to recover the detector signal was −104dBc/Hz, and the signal-to-noise ratio of this harmonic was 73dB. These results demonstrate the feasibility of using JAWS-based waveform synthesis for μMUX flux-ramp generation.