15 May 2018 in Environmental Sciences Europe
Construction products are in contact with water (e.g., rain, seepage water) during their service lifetime and may release potentially harmful compounds by leaching processes. Monitoring studies showed that compounds attributed to construction products are found in storm water and the receiving bodies of water and that the release of biocides in urban areas can be comparable to the input of pesticides from agricultural uses. Therefore, a prospective risk assessment of such products is necessary. Laboratory leaching tests have been developed by the Technical Committee CEN/TC 351 and are ready to use. One major task in the future will be the evaluation of the leaching test results, as concentrations found in laboratory experiments are not directly comparable to the field situations. Another task will be the selection of compounds to be considered for construction products, which are often a complex mixture and contain additives, pigments, stabilization agents, etc. The formulations of the products may serve as a starting point, but total content is a poor predictor for leachability, and analysis of the eluates is necessary. In some cases, non-targeted approaches might be required to identify compounds in the eluates. In the identification process, plausibility checks referring to available information should be included. Ecotoxicological tests are a complementary method to test eluates, and the combined effects of all compounds—including degradation products—are included. A bio test battery has been applied in a round robin test and was published in a guidance document. Published studies on the ecotoxicity of construction products show the tests’ suitability to distinguish between products with small and larger effects on the environment.
18 August 2023 in Building and Environment
25 June 2026 in SSRN Electronic Journal
Facade coatings used in external thermal insulation composite systems (ETICS) are commonly protected against microbial growth by biocides that can leach into the environment. To support the development of biocide‑free products, we developed a rapid weathering method that enables assessment of the resistance of facade coatings to microbial growth. ETICS specimens are mounted in a climate chamber and exposed for 100 days to a controlled climate simulating an average Central European autumn day. Surface temperatures of the specimens are actively regulated to fall below the dew point for 8 ± 1 h per day, generating condensation that promotes microbial growth. Natural colonization is simulated by regular inoculation with a defined suspension of algae and mold. Microbial development is documented throughout the test and quantified using a 10-level rating scale that captures both growth onset and intensity. Application of the method to a range of ETICS compositions demonstrated high discriminatory power and good reproducibility. The procedure is proposed for rapid, laboratory-based comparison of biocide-free ETICS concerning their resistance to facade contamination by microorganisms.