Recently, the robotic assembly has been expanded into an unstructured environment. This environment includes uncertainties that may cause unexpected situations such as a failure of the assembly. Such problems can be prevented or monitored by a robust contact state (CS) estimation method. In that sense, the paper suggests a CS estimation method that contains a torque indicator, a position/velocity indicator, and a CS discriminator. Using joint torque of manipulators and position/velocity of the end-effector, a Gaussian Mixture Model (GMM) builds each indicator by reflecting on two properties of measured data, i.e., non-stationary behavior and correlation among the data. The indicators play a role to indicate the corresponding sensor state. The discriminator is defined by rules which combine the results of the indicators, allowing a robust CS estimation to be achieved. In this respect, the proposed method has a distinct advantage over existing distance-based clustering methods which ignore probabilistic properties or correlation among measured data. The performance of the estimation is demonstrated through experiments with torque-controlled manipulators and commercial prefabricated furniture.
Despite rapid advancements in robotics, teleoperation remains indispensable for precise tasks that have not yet been fully automated. To this end, this paper presents the design, analysis, and experimental validation of the SNU-Avatar Haptic Arm, a high-performance haptic interface developed for immersive teleoperation. To balance payload capacity and backdrivability, the system employs a hybrid actuation architecture combining quasi-direct drive and direct drive mechanisms. This configuration reduces mechanical impedance and friction while ensuring sufficient force output for high-fidelity interaction. The 6-degrees-of-freedom kinematic structure is designed to encompass the natural workspace of the human upper limb, and finite element analysis confirms that the structural natural frequency is sufficiently high to secure a stable control bandwidth. A comprehensive evaluation validates the system’s performance, focusing on force rendering accuracy. The practical utility of the proposed interface was demonstrated in the ANA Avatar XPRIZE Finals through integration with a humanoid robot. The system successfully performed complex missions, such as heavy object manipulation, under constraints including communication latency. The results confirm that the proposed design methodology effectively bridges the gap between remote presence and physical reality, ensuring robust manipulation in extreme environments.
31 August 2024 in Journal of Korea Robotics Society
Precise teleoperation in unstructured environments remains challenging, because human errors and system-inherent limitations such as control jittering can significantly degrade task success and operational efficiency. To address these limitations, this paper proposes a software-defined Context-Aware Virtual Fixture (CAVF) system that leverages the open-world understanding of a Vision-Language Model (VLM). The proposed system automatically generates motion guidance for the robot end-effector (EEF) to assist teleoperation, preserving critical task-relevant motion while suppressing unnecessary translation and rotation components. This framework enables the autonomous generation of context-aware, haptic-free assistance without relying on handcrafted rules or physical force-feedback devices. Quantitative experiments in both simulation and real-world environments demonstrate that the proposed system significantly improves success rates, reduces completion times, and enhances trajectory efficiency compared to conventional teleoperation.