22 May 2023 in IEEE Transactions on Electron Devices
In this work, a reverse conduction beta-phase gallium oxide ( $\beta $ -Ga 2 O 3 vertical FinFET with an integrated Fin diode (FD) is proposed to improve reverse conduction characteristics with little effect on the threshold voltage ( ${V}_{\text {th}}$ ) and breakdown voltage (BV). Its electrical characteristics are studied and analyzed by Sentaurus technology computer aided design (TCAD) simulation. The integrated FD achieves metal–insulator–semiconductor (MIS)-like conduction/blocking characteristics owing to the Fin channel combined with an Ohmic contact anode. In the reverse conduction state, the FD first realizes a very low reverse turn-on voltage ( ${V}_{\text {on}}$ ), and then forms the electron accumulation layers along the Fin sidewalls to improve reverse current capability; in the forward conduction and blocking states, the Fin channel of FD is pinched off by the MIS structures from the two sidewalls due to the work function difference between the source metal and $\beta $ -Ga 2 O 3 , without obvious influence on the forward conduction and blocking characteristics. Compared with the conventional FinFETs (C-FinFETs), the reverse conduction $\beta $ -Ga 2 O 3 vertical FinFET (RC-FinFET) reduces the ${V}_{\text {on}}$ by 71% with almost the same ${V}_{\text {th}}$ and BV values. The proposed $\beta $ -Ga 2 O 3 RC-FinFET achieves a low ${V}_{\text {on}}$ of 0.45 V, high ${V} _{\text {th}}$ of 1.6 V, BV of 2545 V, and Baliga’s figure of merit (BFOM) up to 1.41 GW/cm 2 . In addition, compared to a field effect transistor (FET) externally connecting a freewheeling diode, the RC-FinFET reduces the parasitic inductance and the total chip area, enhancing its application potential for high-power and low-loss power conversion systems.
15 July 2022 in IEEE Transactions on Electron Devices
A $\beta $ -Ga 2 O 3 MOSFET is fabricated and its threshold voltage $({V}_{\mathrm{TH}})$ instability mechanisms are experimentally investigated under different gate-biased voltages and ambient temperatures. Under the condition of the positive bias stress (PBS) of ${V}_{\mathrm{GS}} = 4$ V for 1000 s at room temperature, the ${V}_{\mathrm{TH}}$ positive shift of 0.61 V is mainly caused by the electrons trapped by border traps in Al 2 O 3 . Combining the hysteresis with temperature-dependent performance analysis, the clockwise to anticlockwise hysteresis inversion at 125 °C is discovered in $\beta $ -Ga 2 O 3 MOSFET for the first time, which is probably caused by the activation of deep-level acceptor-type interface states. The deep-level acceptor-type interface states with a fitting activation energy of 114 meV are found, and they also affect the ${V}_{\mathrm{TH}}$ instability at high temperature. With the stress of ${V}_{\mathrm{GS}} =4$ V at 125 °C for 1000 s, ${V}_{\mathrm{TH}}$ is increased by 0.9 V. Analyzing electrical parameters, such as ${V}_{\mathrm{TH}}$ , subthreshold slope ( SS ), and hysteresis width, can distinguish the quantitative contributions of interface states and border traps to ${V}_{\mathrm{TH}}$ instability under electrical stress and thermal stress (TS). This work reveals an important indication for investigating the ${V}_{\mathrm{TH}}$ instability of $\beta $ -Ga 2 O 3 MOSFET in high-power applications.
8 September 2022 in IEEE Transactions on Electron Devices
In this article, we experimentally study the instability of the key electrical characteristic for the fabricated ${\beta }$ -Ga2O3 MOSFET under positive bias stress (PBS) and negative bias stress (NBS), such as threshold voltage ( ${V}_{{\mathrm {TH}}}$ ), ON-resistance ( ${R}_{{\mathrm {on}}}$ ), subthreshold slope (SS), and hysteresis. An ionized traps model is proposed to explain the instability, which depicts the traps and interfaces states capturing/releasing electrons from the channel. We find nonuniform instability mechanisms. Under the PBS of ${V}_{GS} = 4$ V for 1000 s, the ${V}_{{\mathrm {TH}}}$ and ${R}_{{\mathrm {on}}}$ are increased by 0.8 V and 19%, respectively. The constant interface state density indicates that this instability is caused by border traps in the gate oxide capturing electrons from channel. For the NBS of ${V}_{GS} = -4$ V for 1000 s, the variation in the ${V}_{{\mathrm {TH}}}$ and ${R}_{{\mathrm {on}}}$ is −0.54 V and −8.8%, respectively. The instability is attributed to both the border traps and interface states, and the net increase in activated interface states is $2.25\times10$ 11 cm−2 extracted from hysteresis. Unlike the PBS, the interface states release electrons to bulk traps, and thus the activated interface state density changes. A good agreement with experimental results shows that the proposed model could accurately describe the instability mechanism under both PBS and NBS. These results provide guidance for identifying defects, optimizing device structure, and fabrication process to improve the reliability of $\boldsymbol {\beta } $ -Ga2O3 MOSFET.
14 December 2023 in IEEE Transactions on Electron Devices
A new design concept to improve the blocking capability and reliability is proposed and verified by simulations and experiments. Based on the concept, the reduced surface field (RESURF) $\beta $ -Ga2O3 Schottky barrier diode (SBD) is fabricated. Its electrical characteristics are investigated and the thermal stability is evaluated by the long-time high-temperature storage (HTS) test from 400 to 450 K. The RESURF structure is achieved by the oxidation region and SiO2 trench termination. First, the oxidation region is formed by thermal oxidation treatment (TOT) to reduce the surface electron concentration and passivate the oxygen-vacancy type interface states. It not only reduces surface electric field peak ( ${E}_{\text {max}}{)}$ and optimizes the vertical electric field profile, but also improves reliability. Second, the SiO2 trench further reduces the charges to decrease the surface ${E} _{\text {max}}$ . The large-size RESURF SBD exhibits a withstand voltage of 600 V with the reverse leakage current ( ${I}_{\text {R}}{)}$ of less than $10 ~\mu \text{A}$ , as well as a forward current ( ${I}_{\text {F}}{)}$ of 7 A. After the HTS test up to 450 K, the forward ${I}-{V}$ curves exhibit a less than 2% positive shift with almost constant ON-resistance and turn-on voltage; the withstand voltage is still up to 600 V without a sharp increase in ${I}_{\text {R}}$ ; and the fluctuations of extracted reverse recovery time/charge ( ${T}_{\text {rr}}/{Q}_{\text {rr}}{)}$ are less than 5%. The fabricated large-size RESURF $\beta $ -Ga2O3 SBD achieves good compressive performance and thermal stability, showing the great potential in high power applications under high-temperature condition.
7 December 2022 in IEEE Transactions on Electron Devices
In this work, a low turn-on voltage ( $\textit{V}_{{\biosc{on}}}$ ) and high breakdown voltage (BV) beta-phase gallium oxide ( $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ ) diode with a Fin channel combined with an ohmic contact anode and composite field-plate (FOCF) is proposed. Its electrical characteristics are investigated by Sentaurus TCAD simulation. The novel FOCF diode has two features: one is a Fin channel combined with ohmic contact anode (FO) to achieve metal–insulator–semiconductor (MIS)-like forward/reverse characteristics and thus realize a very low $\textit{V}_{{\biosc{on}}}$ ; the other is composite field-plate (CF) to improve BV, consisting of Al $_{\text{2}}$ O $_{\text{3}}$ and SiN $_{\textit{X}}$ dual-dielectric layers to form step-shaped field plate. When the forward voltage ( $\textit{V}_{{\text{F}}}$ ) is 0 V, the Fin channel is pinched off due to the work function difference between the anode metal and $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ ; thus, the pinch-off effect allows the ohmic contact anode to take place of Schottky contact anode to significantly reduce $\textit{V}_{{\biosc{on}}}$ . As $\textit{V}_{{\text{F}}}$ increases, the electron accumulation layers can be formed along the Fin sidewalls to improve current capability and reduce ON-resistance. Moreover, the pinch-off effect suppresses reverse leakage current and CF modulates the electric field distribution, both of which improve BV. The proposed FOCF $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ diode achieves low $\textit{V}_{{\biosc{on}}} =$ 0.45 V, high BV $=$ 2204 V, and Baliga’s figure of merit (BFOM) up to 1.47 GW/cm $^{\text{2}}$ . Therefore, the proposed structure provides a new design concept and enhances the application potential for high-power and low-loss $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ diodes.
8 February 2024 in IEEE Transactions on Electron Devices
We proposed an electrothermal aging (ETA) technology to improve stability of threshold voltage ( V $_{\text{TH}}$ ) in fabricated NiO/ $\beta$ -Ga $_{\text{2}}$ O $_{\text{3}}$ heterojunction-gate FET (HJ-FET). Firstly, the HJ-FET is treated by ETA with a gate stress ( V $_{\text{G},\text{Str}}$ ) of $-$ 8 V and a thermal stress rising to 60 $^{\circ}$ C. An interface dipole ionization model is proposed to explain the ETA mechanism. The two kinds of interface dipoles are permanently ionized under electrothermal stress, leading to a thinned space charge region (SCR) as well as the reduced recombination centers concentrations at heterojunction (HJ) interface, which is responsible for the negative and positive shift of the I – V curves for the HJ-FET and HJ-diode under gate negatively biased, respectively. Secondly, the device treated by ETA is placed for 100 days without stresses at room temperature (ETA $+$ 100D), the forward electrical properties of the devices remain almost unchanged with the gate stress time, and fully consistent with the performance of the device with just completed ETA treatment, proving the credibility of the ETA method to improve stability. Thirdly, the reliability of the device was assessed by negative bias temperature instability (NBTI) and was found to be greatly enhanced. Significantly, at 40 $^{\circ}$ C, the shift ratio of V $_{\text{TH}}$ decreases greatly to 0.4% after ETA $+$ 100D from 31% before ETA. Furthermore, the device exhibits high stability with an extremely low V $_{\text{TH}}$ shift ratio of 2.4% even up to 200 $^{\circ}$ C. Our work demonstrates the great potential of $\beta $ -Ga $_{\text{2}}$ O $_{\text{3}}$ HJ devices after ETA for a stable operation in extreme environments.