In this paper, we propose a simulation-based novel Split-Gate Trench MOSFET structure with an optimized fabrication process to enhance power efficiency, switching speed, and thermal stability for high-performance semiconductor applications. Integrating High-k pillars Superjunction beneath the Split-Gate enhancing breakdown performance by reducing critical field intensity by up to 35%, the device achieves a 15% improvement in Figures of Merit (FOMs) for BV2/Ron,sp. Dynamic testing reveals approximately a 25% reduction in both input and output capacitance, as well as gate-drain charge (QGD). This reduction, coupled with an approximately 40% improvement in Baliga’s High-Frequency Figure of Merit (BHFFOM) and over 20% increase in the New High-Frequency Figure of Merit (NHFFOM), underscores the design’s suitability for high-speed, high-efficiency power electronics. Simulations examining the effects of High-k pillar depth indicate that an optimal depth of 3.5 μm achieves a balanced performance between BV and Ron,sp. The influence of High-k materials on BT-Hk-SJ MOSFET performance was investigated by comparing hafnium dioxide (HfO2), nitride, and oxynitride. Among these, HfO2 demonstrated optimal performance across static, dynamic, and diode characteristics due to its high dielectric constant, while material choice had minimal impact, with variations kept within 5%.
1 July 2025 in ECS Journal of Solid State Science and Technology
A simple yet highly effective band structure model of germanium (Ge) for electron and hole transport in bulk semiconductor is developed for Monte Carlo (MC) simulations at 300 K. The simulated electron and hole drift velocities versus the applied electric field are compared with experimental data, serving as a reference for model accuracy. The comparison between the experimental and simulation results, up to an electric field of 700 kV cm−1 for electrons and up to 10 kV cm−1 for holes in the Ge 〈100〉 crystallographic orientation, demonstrates exceptionally good agreement, especially for holes, when compared to previous works. We have found that electron/hole effective masses in the lowest valley (the L-valley)/band (the heavy-band) are highly anisotropic with longitudinal and transverse masses of 1.588/1.64 and 0.082/0.052, respectively. The electron and hole mobilities as a function of ionised impurity concentration are also obtained using a static screening model in carrier scattering with ionised impurities. Finally, the relaxation times and the occupation of valleys in the conduction and valence bands are shown as a function of the applied electric field.