In this paper, we propose a simulation-based novel Split-Gate Trench MOSFET structure with an optimized fabrication process to enhance power efficiency, switching speed, and thermal stability for high-performance semiconductor applications. Integrating High-k pillars Superjunction beneath the Split-Gate enhancing breakdown performance by reducing critical field intensity by up to 35%, the device achieves a 15% improvement in Figures of Merit (FOMs) for BV2/Ron,sp. Dynamic testing reveals approximately a 25% reduction in both input and output capacitance, as well as gate-drain charge (QGD). This reduction, coupled with an approximately 40% improvement in Baliga’s High-Frequency Figure of Merit (BHFFOM) and over 20% increase in the New High-Frequency Figure of Merit (NHFFOM), underscores the design’s suitability for high-speed, high-efficiency power electronics. Simulations examining the effects of High-k pillar depth indicate that an optimal depth of 3.5 μm achieves a balanced performance between BV and Ron,sp. The influence of High-k materials on BT-Hk-SJ MOSFET performance was investigated by comparing hafnium dioxide (HfO2), nitride, and oxynitride. Among these, HfO2 demonstrated optimal performance across static, dynamic, and diode characteristics due to its high dielectric constant, while material choice had minimal impact, with variations kept within 5%.
Thermal stability and phase transformation of conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure on sapphire substrates were investigated via in situ high temperature x-ray diffraction, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The conductive α-(Al0.16Ga0.84)2O3/Ga2O3 heterostructure with fluorine (F) doping was grown by mist-chemical vapor deposition on sapphire substrates, achieving a Hall mobility of 28 cm2/(V s). The heterostructure exhibited thermal stability up to ∼550–575 °C before transforming to β-(AlxGa1−x)2O3/Ga2O3. The transformed β-Ga2O3 is mainly polycrystalline rather than a high-quality epitaxial phase. Reciprocal space mapping results reveal that the edge dislocation density remains consistently higher than the screw dislocation density throughout the heating process, indicating that the crystalline imperfection in α-Ga2O3 is dominated by in-plane mosaicity. After the phase transformation from the α phase to the β phase, catastrophic damage to the film and upheaval of the surface were observed by SEM and AFM.
In this Letter, we report gate leakage suppression in p-GaN/AlGaN p-channel transistors enabled by a transferred boron nitride (BN) gate dielectric for high-temperature operation. To elucidate the impact of BN integration, we systematically compare transfer characteristics, transconductance, and related metrics as functions of temperature (25–300 °C) for BN and conventional Schottky gate devices. Notably, current density in the BN device remains stable above ∼3 mA/mm at 300 °C, with an on/off ratio >103 and ID, max × LDS reaching ∼47 μA. At the same time, both the threshold voltage shift and the subthreshold slope show minimal variation, highlighting the excellent stability of this device. These results can provide insight into design strategies for high-temperature p-GaN p-channel transistors.
1 October 2026 in Semiconductor Science and Technology
A compact analytical–numerical framework is developed for drift-region design in quasi-vertical gallium nitride (GaN) trench metal–oxide–semiconductor field-effect transistors. The forward model combines finite-thickness electrostatics, an equivalent fixed-charge correction, GaN avalanche ionization, and trench-to-drift current spreading. Four fixed-thickness structures first verify the field regime, breakdown voltage, and specific on-resistance against two-dimensional technology computer-aided design (TCAD), with maximum deviations of 1.42% for breakdown voltage and 2.7% for specific on-resistance. The model is then embedded in an inverse search that selects the drift doping and thickness maximizing the Baliga figure of merit within a nominal voltage window. A subsequent same-structure robustness check over 37 unique TCAD cases spanning 772–2639 V gives mean absolute percentage errors of 4.1% for breakdown voltage and 6.6% for specific on-resistance. The optimized trajectory is reduced to compact power-law expressions with maximum fitting errors below 4.6%. These platform-specific relations provide a traceable first-pass design tool before multidimensional TCAD refinement and fabrication.
We report high-performance GaN p-channel MOSFETs enabled by atomic layer deposited (ALD) Ga2O3 as a high-k gate dielectric. The devices achieve a high Baliga's figure of merit of 0.43 MW/cm2 with a breakdown voltage exceeding 200 V. Minimal hysteresis (<100 mV) is observed in both I–V and C–V characteristics, indicating a high-quality Ga2O3/p-GaN interface with a low interface trapped charge density. Material characterization confirms the formation of a dense and uniform Ga2O3 dielectric with excellent interfacial integrity. The devices exhibit well-defined transfer and output characteristics with clear pinch-off and stable off-state leakage. Post-breakdown analysis and TCAD simulations reveal that electric-field crowding at the gate edge governs device failure. These results establish ALD Ga2O3 as a promising gate dielectric for high-voltage GaN complementary power electronics.
This study optimizes 28 nm planar MOSFET technology to reduce device leakage current and enhance switching speed. The specific aims are to decrease subthreshold swing (S.S.) and mitigate drain-induced barrier lowering (DIBL) effect. Silvaco TCAD software is used for process (Athena) and device (Atlas) simulations. For the further development of MOSFET technology, we implemented our device (planar 28 nm n-MOSFET) with high- k metal-gate (HK/MG), lightly doped drain (LDD), multi-spacers, and silicide. Simulation validation shows improvements over other 28 nm devices, with lower static power consumption and notable optimizations in both S.S. (69.8 mV/dec) and DIBL effect (30.5 mV/V).