This paper presents a switched capacitor network (SCN)-based bandgap voltage reference (BGR) circuit designed and implemented in a 65nm standard CMOS process with a wide temperature range, high precision, low supply voltage and low power consumption for IoT device application. The proposed BGR employs a 2x charge pump with ripple optimization design to supply the V_EB generator, which can relax V_DD from 0.9V to 0.5V.A proportional to absolute temperature (PTAT) current source is proposed to bias the PNP BJT in order to reduce the nonlinearity of V_EB. Moreover, a voltage divider SCN with low leakage consideration to form the complementary to absolute temperature (CTAT) voltage is designed to reduce the nonlinearity of its coefficient, while a series-parallel SCN with adjusted clock swing to form the PTAT voltage is designed to improve the line regulation of the BGR. The measurement result shows that the proposed BGR has a temperature coefficient (TC) of 42 ppm/°C at 0.5V supply within - 40 °C to 120 °C. The line regulation is 3.2mV/V or 0.64%/V from 0.5V to 1V. Based on 6-chip test result, it shows a 3σ /μ variation of 3.08% before trimming, while 0.36% after trimming.
26 July 2021 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a switched-capacitor network (SCN) based bandgap voltage reference (BGR) for IoT applications. The proposed BGR employs a dual proportional-to-absolute-temperature (PTAT) clock topology to achieve both high precision and low power over a wide temperature range while relaxing the capacitor size requirements. Specifically, the fast PTAT clock assists in reducing the output voltage ripple of the dual-branch interleaved $2\times $ charge pump (CP). Meanwhile, the slow PTAT clock controls the voltage divider SCN to relax the settling error at low temperature and the leakage-induced error at high temperature simultaneously, resulting in lower power consumption and smaller temperature coefficient (TC). We also propose a replica $V_{\mathrm {EB}}$ generation branch in the series-parallel SCN to improve the BGR output TC due to the finite settling time during switching. Fabricated in 65nm standard CMOS, measurement results show that the proposed BGR obtains a TC of 32 ppm/°C at 0.5V supply within −40 °C to 120 °C. The line regulation is 3.3mV/V or 0.66%/V from 0.5V to 1V. Based on 10-chip measurement results, we obtain a $3\sigma / \mu $ variation of 1.37% before trimming, while 0.25% after applying one-point trimming at 20°C.
27 July 2023 in IEEE Journal of Solid-State Circuits
This article presents an auto-calibration technique for current-based bandgap voltage references (BGRs), based on a digitally-assisted auto-calibration loop for calibration cost reduction. We first present a theoretical study of the process variation induced $V_{\mathrm{EB}}$ and $\Delta V_{\text {EB}}$ variations in the BJT, which contribute to residual errors in the reference voltage ( $V_{\mathrm{REF}}$ ) and its temperature coefficient (TC) after applying conventional one-point trimming. Based on the study, we further propose an automatic one-point trimming methodology using a current digital-to-analog converter (IDAC), which can simultaneously relax the $A{V}$ EBand $\Delta V_{\mathrm{EB}}$ variations, resulting in a small drift in both $V_{\mathrm{REF}}$ and its TC after calibration. Fabricated in 65 nm standard CMOS, the proposed auto-calibrated BGR achieves a measured TC of 22.3 ppm/°C at 1.2 V supply within −40 °C to 120 °C. The line regulation is 1.26 mV/V or 0.13%/V from 1.2 to 2.5 V. Based on ten-chip measurement results, the achieved $\sigma /\mu $ variation in $V_{\mathrm{REF}}$ improves from ±0.53% to ±0.12% within the entire temperature spectrum after applying the proposed auto-calibration technique at 27 °C.
16 August 2023 in IEEE Transactions on Circuits and Systems I: Regular Papers
This paper presents a segmented curvature-compensated bandgap voltage reference (BGR) with low temperature coefficient (TC) and power consumption across a wide temperature range. In this work, we achieve temperature segmentation by comparing voltage instead of current, as in the conventional method, significantly reducing power consumption. Furthermore, we examine the trade-off between TC and power consumption, focusing on optimizing the number of temperature segments. In the core circuit, we utilize a regulated cascode current mirror to minimize channel length modulation induced error existing in the current-based BGR topology. We also introduce a replica structure to prevent oscillation and design comparators with the hysteresis characteristic to address noise influence. The proposed BGR, implemented in 65 nm CMOS, occupies an active area of 0.058 mm $^{2}$ . Measurement results of 6 chips show that the achieved reference voltage of 431.3 mV under 1 V supply has the best TC of 8.7 ppm/ $^{\circ}$ C over a temperature range of $-$ 40 $^{\circ}$ C to 90 $^{\circ}$ C, consuming 740 nW at 20 $^{\circ}$ C.
13 July 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
This brief presents a switched-capacitor network (SCN)-based bandgap voltage reference (BGR) with a leakage current injection technique for curvature correction, improving performance in terms of temperature coefficient (TC). A deep N-well NMOS transistor biased with a complementary to absolute temperature (CTAT) voltage generates a leakage current with a concave upward curvature. Subsequently, we inject this current into the SCN network during the holding state for curvature correction. The injected leakage current changes the sampled CTAT voltage, achieving TC compensation without consuming too much additional power. The proposed BGR, fabricated in 65nm CMOS, occupies an active area of 0.0442 mm2. Measurements from 5 chips show that the achieved reference voltage is 432.4 mV under a 0.5 V supply. The average TC is 22.5ppm/∘C over a temperature range of -40∘C to 120∘C, significantly improving on TC while the power consumption is only 29 nW, which is comparable to previous SCN BGRs. This validates the effectiveness of the proposed leakage current injection technique for curvature correction.