We report the fabrication of anisotropic lightweight composite foams based on commercial colloidal silica particles and TEMPO-oxidized cellulose nanofibrils (TOCNF). The unidirectional ice-templating of silica-TOCNF dispersions resulted in anisotropic foams with columnar porous structures in which the inorganic and organic components were homogeneously distributed. The facile addition of silica particles yielded a significant enhancement in mechanical strength, compared to TOCNF-only foams, and a 3.5-fold increase in toughness at a density of 20 kg m−3. The shape of the silica particles had a large effect on the mechanical properties; anisotropic silica particles were found to strengthen the foams more efficiently than spherical particles. The water uptake of the foams and the axial thermal conductivity in humid air were reduced by the addition of silica. The composite foams were super-insulating at dry conditions at room temperature, with a radial thermal conductivity value as low as 24 mW m−1 K−1, and remained lower than 35 mW m−1 K−1 up to 80% relative humidity. The combination of high strength, low thermal conductivity and manageable moisture sensitivity suggests that silica-TOCNF composite foams could be an attractive alternative to the oil-based thermal insulating materials.
13 November 2020 in ACS Sustainable Chemistry & Engineering
Thermally insulating foams and aerogels based on cellulose nanofibrils (CNFs) are promising alternatives to fossil-based thermal insulation materials. We demonstrate a scalable route for moisture-resilient lightweight foams that relies on sclerotization-inspired Michael-type cross-linking of amine-modified CNFs by oxidized tannic acid. The solvent-exchanged, ice-templated, and quinone-tanned cross-linked anisotropic structures were mechanically stable and could withstand evaporative drying with minimal structural change. The low-density (7.7 kg m–3) cross-linked anisotropic foams were moisture-resilient and displayed a compressive modulus of 90 kPa at 98% relative humidity (RH) and thermal conductivity values close to that of air between 20 and 80% RH at room temperature. Sclerotization-inspired cross-linking of biobased foams offers an energy-efficient and scalable route to produce sustainable and moisture-resilient lightweight materials.
The development of robust production processes is essential for the introduction of advanced materials based on renewable and Earth-abundant resources. Cellulose nanomaterials have been combined with other highly available nanoparticles, in particular clays, to generate multifunctional films and foams. Here, the structure of dispersions of rod-like cellulose nanocrystals (CNC) and montmorillonite nanoplatelets (MNT) was probed using small-angle X-ray scattering within a rheological cell (Rheo-SAXS). Shear induced a high degree of particle orientation in both the CNC-only and CNC:MNT composite dispersions. Relaxation of the shear-induced orientation in the CNC-only dispersion decayed exponentially and reached a steady-state within 20 seconds, while the relaxation of the CNC:MNT composite dispersion was found to be strongly retarded and partially inhibited. Viscoelastic measurements and Guinier analysis of dispersions at the shear rate of 0.1 s−1 showed that the addition of MNT promotes gel formation of the CNC:MNT composite dispersions. A better understanding of shear-dependent assembly and orientation of multi-component nanoparticle dispersions can be used to process materials with improved mechanical and functional properties.
Controlling the morphology and crystallographic coherence of assemblies of magnetic nanoparticles is a promising route to functional materials. Time-resolved small-angle X-ray scattering (SAXS) was combined with microscopy and scaling analysis to probe and analyze evaporation-induced assembly in levitating drops and thin films of superparamagnetic iron oxide nanocubes in weak magnetic fields. We show that assembly of micrometer-sized mesocrystals with a cubic shape preceded the formation of fibers with a high degree of crystallographic coherence and tunable diameters. The second-stage assembly of aligned cuboidal mesocrystals into fibers was driven by the magnetic field, but the first-stage assembly of the oleate-capped nanocubes was unaffected by weak magnetic fields. The transition from 3D growth of the primary mesocrystals to the second stage 1D assembly of the elongated fibers was related to the size and field dependence of isotropic van der Waals and directional dipolar interactions between the interacting mesocrystals.