Solid-electrolyte interphase (SEI) is essential for improving the cycling stability in sodium-ion batteries (SIBs) by preventing direct contact between electrolytes and hard carbon (HC) anodes. Conventional C-F bond molecules like fluoroethylene carbonate (FEC) show poor SEI formation due to early sodium-ion adsorption on HC, delaying additive reduction. Herein, methyl 2, 2-difluoro-2-(fluorosulfonyl) acetate (MDFA), a weak-fluorine-bond molecule, is proposed to facilitate early SEI formation and suppress parasitic reactions. The strong electron-withdrawing O=S=O group destabilizes the S-F bond, enabling preferential reduction of MDFA and formation of inorganic SEI components that enhance ionic conductivity and accelerate interfacial charge transfer. As a result, the HC with MDFA shows over 5000 stable cycles and delivers a high capacity of 252 mAh g-1 at 5 C, outperforming 108 mAh g-1 of that with FEC. A 4.6 Ah pouch cell with MDFA enables 89.3% capacity retention after 1000 cycles. These findings provide valuable insights into fluorine-bond chemistry for the electrolyte additive design in long-life SIBs.
O3‐type sodium layered oxide cathodes suffer from irreversible phase transition induced by excessive interlayer slip during the de‐sodiation process, resulting in accelerated structure degradation. Herein, we address this issue by tuning the lattice ordering degree in layered oxides via configurational entropy (ΔS conf ) modulation. Results show that the quasi‐high‐entropy layered oxide (ΔS conf = 1.49 R) features a semi‐ordered covalent lattice with an ordered Mn‐O honeycomb covalent sublattice, while other transition metal (TM) atoms are disordered at the remaining sites. This unique covalent lattice exhibits a moderate electrostatic interaction between TMO 2 layers, thus yielding an intermediate interlayer slip energy barrier, enabling effective stress release through controlled interlayer slip, and facilitating a reversible O3‐P3‐O3 phase transition, outperforming medium‐entropy ordered (1.04 R) and high‐entropy disordered (1.60 R) counterparts. Consequently, the optimized quasi‐high‐entropy cathode exhibits remarkable cycling stability (84.4% capacity retention after 1000 cycles at 5 C), and a 1.25 Ah pouch cell retains 86.9% of its initial capacity after 500 cycles at 2 C. This work further elucidates that ΔS conf regulates phase transition reversibility via tuning lattice ordering degree, establishing it as a key descriptor for the rational design of high‐performance sodium layered oxide cathodes.
20 September 2026 in Advanced Functional Materials
Ni‐rich layered oxide cathodes with high energy density are regarded as one of the most promising cathode candidates for achieving next‐generation high‐energy lithium‐ion batteries (LIBs). However, increasing the Ni content introduces critical challenges, including undesirable phase transitions, sluggish Li + transport, and intergranular cracking, which hinder their large‐scale application. This work demonstrates an Al 3+ /Ta 5+ co‐doping strategy, enabling homogeneous Li + transport in a Ni‐rich cathode by forming LiNi 0.94 Ta 0.01 Al 0.05 O 2 (LNTAO) with refined grains and suppressed Li/Ni cation mixing. The achieved homogenization suppresses high‐voltage phase transitions and facilitates Li + intercalation/deintercalation during cycling. It also preserves the Ni valence state and Ni─O coordination environment, maintains grain‐boundary integrity, and suppresses interfacial side reactions during prolonged cycling. Enabled by these advantages, the cycle and rate performance of the Ni‐rich cathode are effectively enhanced. This Al 3+ /Ta 5+ co‐doping strategy provides fundamental materials‐design insights into enhancing the electrochemical performance of Ni‐rich layered cathodes through the homogenization of Li + transport.