In this paper, an Adaptive Dynamic Scheduling Algorithm (ADSA) based on Artificial Bee Colony (ABC) was developed for vehicular traffic control. The developed model optimally scheduled green light timing in accordance with traffic condition in order to minimize the Average Waiting Time (AWT) at the cross intersection. A MATLAB based Graphic User Interface (GUI) traffic control simulator was developed. In order to demonstrate the effectiveness of the developed ADSA this paper was validated with the existing work in the literature. The result obtained for the AWT of the developed ADSA had a performance of 76.67%. While for vehicular queues cleared at the intersection the developed ADSA had a performance of 53.33%. The results clearly expressed that the developed ADSA method has been successful in minimizing the Average Waiting Time and vehicular queues at the intersection.
1 August 2023 in International Journal of Electrical and Computer Engineering (IJECE)
Flying ad-hoc network (FANET) is characterized by key component features such as communication scheme, energy awareness, and task distribution. In this research, a surveillance space considering standard petroleum pipe was created with three drones viz: drone 1 (D1), master drone (DM), and drone 2 (D2) to survey as FANET. DM aggregate packets from D1, D2 and communicate with the static ground control station (SGCS). The starting point of the three drones and their trajectories during deployment were calculated and simulated. Selection of DM, D1, and D2 was done using battery level before take-off. Simulation results show take-off time difference which depends on the distance of each drone to the SGCS during deployment. D1 take-off first, while DM and D2 followed after 0.0704 and 0.1314 ms respectively. The position-oriented routing protocols results indicated variation of information flow within time notch due to variation in the density of the transmitted packets. Packets delivery periods are 0.00136×103 sec, 0.00110×103 sec, and 0.00246×103 sec for time notch 1, 2, and aggregating time notch respectively. From the results obtained, two algorithms were used successfully in deploying the drones
1 August 2023 in International Journal of Informatics and Communication Technology (IJ-ICT)
In this research, we present a low phase noise (PN) and wide tuning range 175 GHz inductors and capacitors (LC) voltage-controlled oscillator (VCO) based on a differential Colpitts oscillator that was designed using a 0.13 μm bipolar complementary metal oxide semiconductor (BiCMOS) and simulated. The square of the tank Q-factor and the square of the oscillation amplitude were both maximized to reduce PN. With an extensive examination of parasitic, mathematical analysis of load impedances, and implementation of differential design, the PN was reduced, and the output power was enhanced. Using a supply voltage of 1.6 V, the VCO consumes 41.9 mA, resulting in a total power usage of 67 mW to prevent undesirable PN deterioration, an inter-stage LC filter at the VCO-buffer interface increases the swing at the buffer input. To make a better output, a buffer is used to isolate the load from the VCO core. In addition, the VCO has a high linearity and the overall, the VCO presented in this study demonstrates excellent performance and has the potential to be used in a wide range of applications that require a high-performance, low-power VCO.