1 October 2015 in IEEE Transactions on Cloud Computing
This work performs a rigorous, comparative analysis of the fog computing paradigm and the conventional cloud computing paradigm in the context of the Internet of Things (IoT), by mathematically formulating the parameters and characteristics of fog computing-one of the first attempts of its kind. With the rapid increase in the number of Internet-connected devices, the increased demand of real-time, low-latency services is proving to be challenging for the traditional cloud computing framework. Also, our irreplaceable dependency on cloud computing demands the cloud data centers (DCs) always to be up and running which exhausts huge amount of power and yield tons of carbon dioxide (CO2) gas. In this work, we assess the applicability of the newly proposed fog computing paradigm to serve the demands of the latency-sensitive applications in the context of IoT. We model the fog computing paradigm by mathematically characterizing the fog computing network in terms of power consumption, service latency, CO2 emission, and cost, and evaluating its performance for an environment with high number of Internet-connected devices demanding real-time service. A case study is performed with traffic generated from the 100 highest populated cities being served by eight geographically distributed DCs. Results show that as the number of applications demanding real-time service increases, the fog computing paradigm outperforms traditional cloud computing. For an environment with 50 percent applications requesting for instantaneous, real-time services, the overall service latency for fog computing is noted to decrease by 50.09 percent. However, it is mentionworthy that for an environment with less percentage of applications demanding for low-latency services, fog computing is observed to be an overhead compared to the traditional cloud computing. Therefore, the work shows that in the context of IoT, with high number of latency-sensitive applications fog computing outperforms cloud computing.
1 March 2016 in IET Networks
In this study, the authors focus on theoretical modelling of the fog computing architecture and compare its performance with the traditional cloud computing model. Existing research works on fog computing have primarily focused on the principles and concepts of fog computing and its significance in the context of internet of things ( IoT ). This work, one of the first attempts in its domain, proposes a mathematical formulation for this new computational paradigm by defining its individual components and presents a comparative study with cloud computing in terms of service latency and energy consumption. From the performance analysis, the work establishes fog computing, in collaboration with the traditional cloud computing platform, as an efficient green computing platform to support the demands of the next generation IoT applications. Results show that for a scenario where 25% of the IoT applications demand real‐time, low‐latency services, the mean energy expenditure in fog computing is 40.48% less than the conventional cloud computing model.
24 March 2014 in IEEE Journal of Biomedical and Health Informatics
In critical medical emergency situations, wireless body area network (WBAN) equipped health monitoring systems treat data packets with critical information regarding patients' health in the same way as data packets bearing regular healthcare information. This snag results in a higher average waiting time for the local data processing units (LDPUs) transmitting data packets of higher importance. In this paper, we formulate an algorithm for Priority-based Allocation of Time Slots (PATS) that considers a fitness parameter characterizing the criticality of health data that a packet carries, energy consumption rate for a transmitting LDPU, and other crucial LDPU properties. Based on this fitness parameter, we design the constant model hawk-dove game that ensures prioritizing the LDPUs based on crucial properties. In comparison with the existing works on priority-based wireless transmission, we measure and take into consideration the urgency, seriousness, and criticality associated with an LDPU and, thus, allocate transmission time slots proportionately. We show that the number of transmitting LDPUs in medical emergency situations can be reduced by 25.97%, in comparison with the existing time-division-based techniques.
20 January 2016 in IEEE Pulse
Over the past decade, embedded systems and microelectromechanical systems have evolved in a radical way, redefining our standard of living and enhancing the quality of life. Health care, among various other fields, has benefited vastly from this technological development. The concept of using sensors for health care purposes originated in the late 1980s when sensors were developed to measure certain physiological parameters associated with the human body. In traditional sensor nodes, the signal sources are mostly different environmental phenomena (such as temperature, vibration, and luminosity) or man-made events (such as intrusion and mobile target tracking), whereas in case of the physiological sensors, the signal source is living human tissue. These sensor nodes, as their primary sensing element, have a diaphragm that converts pressure into displacement. This displacement, in turn, is subsequently transformed into an electrical signal. The concept of wireless physiological sensor nodes, however, gained popularity in the mid-2000s, with the sensed data from the nodes transmitted to the hub via a wireless medium. The network formed by this heterogeneous set of wireless body sensor nodes is termed a wireless body-area network (WBAN). Each WBAN is essentially a composition of multiple wireless body sensor nodes and a single hub. The hub is primarily responsible for acquisition of the raw sensed data from all the component sensor nodes and first-level aggregation of the data before transmitting the aggregated data for further analysis to a remote data acquisition center. Here, we outline the evolution of WBANs in the context of modern health care and its convergence with nanotechnology.
9 January 2015 in IEEE Transactions on Computers
Recently, the IEEE 802.15.6 Task Group introduced a new wireless communication standard that provides a suitable framework specifically to support the requirements of wireless body area networks (WBANs). The standardization dictates the physical (PHY) layer and medium access control (MAC) layer protocols for WBAN-based communications. Unlike the pre-existing wireless communication standards, IEEE 802.15.6 standardization supports short-range, extremely low power wireless communication with high quality of service and support for high data rates upto 10 Mbps in the vicinity of living tissues. In this work, we construct a discrete-time Markov chain (DTMC) that efficiently depicts the states of an IEEE 802.15.6 CSMA/CA-based WBAN. Following this, we put forward a thorough analysis of the standard in terms of reliability, throughput, average delay, and power consumption. The work concerns non-ideal channel characteristics and a saturated network traffic regime. The major shortcoming of the existing literature on Markov chain-based analysis of IEEE 802.15.6 is that the authors did not take into consideration the time spent by a node awaiting the acknowledgement frame after transmission of a packet, until time-out occurs. Also, most of the work assume that ideal channel characteristics persist for the network which is hardly the case in practice. This work remains distinctive as we take into account the waiting time of a node after it transmits a packet while constructing the DTMC. Based on the DTMC, we perform a user priority (UP)-wise analysis, and justify the importance of the standard from a medical perspective.
14 September 2020 in IEEE Systems Journal
The application of Internet-of-Things (IoT) technology in modern healthcare environment has given rise to a new paradigm known as healthcare IoT. The wireless body area network (WBAN) is one of the basic building blocks of IoT-based healthcare system, comprising many wearable (on-body) and implant (in-body) sensors placed in or around patient body connected to a hub for physiological signal monitoring. In in-body sensor-based WBAN, guaranteeing quality-of-service and prolonging network lifetime are major impediments due to the sensor location and limited battery capacity. In this article, we propose a novel energy-efficient medium access control (MAC) protocol for IEEE 802.15.6 standard complaint in-body sensor-based WBAN. Typically, the in-body sensor-based WBAN communication is hub-initiated; however, in case of an emergency event, the in-body sensor node transmits an emergency frame arbitrarily without sensing the channel. This inadvertent in-body sensor-initiated transmission has a very high probability of collision with the ongoing hub-initiated transmission, and/or another in-body sensor-initiated emergency frame transmission. This results in emergency frame retransmission and consequently affects the node’s energy consumption and lifetime. To alleviate this issue, we propose a modified superframe structure, in which separate access phases are introduced for the emergency event and regular event. In case of an emergency event, a novel emergency event handling scheme and a ranking and priority assignment protocol is proposed to detect and address the critical event of in-body sensors. To minimize the collision, a scheduled access mechanism is proposed according to the criticality of the node. Performance analysis of the proposed in-body sensor MAC is done in terms of latency and overall power consumption, in case of both emergency and regular events.