29 August 2017 in IEEE Internet of Things Journal
AVAthanasios V. Vasilakos
Internet of things (IoT) facilitates billions of devices to be enabled with network connectivity to collect and exchange real-time information for providing intelligent services. Thus, IoT allows connected devices to be controlled and accessed remotely in the presence of adequate network infrastructure. Unfortunately, traditional network technologies such as enterprise networks and classic timeout-based transport protocols are not capable of handling such requirements of IoT in an efficient, scalable, seamless, and cost-effective manner. Besides, the advent of software-defined networking (SDN) introduces features that allow the network operators and users to control and access the network devices remotely, while leveraging the global view of the network. In this respect, we provide a comprehensive survey of different SDN-based technologies, which are useful to fulfill the requirements of IoT, from different networking aspects—edge, access, core, and data center networking. In these areas, the utility of SDN-based technologies is discussed, while presenting different challenges and requirements of the same in the context of IoT applications. We present a synthesized overview of the current state of IoT development. We also highlight some of the future research directions and open research issues based on the limitations of the existing SDN-based technologies.
21 March 2019 in IEEE Journal on Selected Areas in Communications
In this paper, we consider the problem of task offloading in a software-defined access network where IoT devices are connected to fog computing nodes by multi-hop IoT access-points (APs). The proposed scheme considers the following aspects in fog-computing based IoT architecture — a) optimal decision on local or remote task computation, b) optimal fog node selection, and c) optimal path selection for offloading. Accordingly, we formulate the multi-hop task offloading problem as an integer linear program (ILP). Since the feasible set is non-convex, we propose a greedy-heuristic based approach to efficiently solve the problem. The greedy solution takes into account delay, energy consumption, multi-hop paths, and dynamic network conditions such as link utilization and SDN rule-capacity. Experimental results show that the proposed scheme is capable of reducing the average delay and energy consumption by 12% and 21%, respectively, compared to the state-of-the-art.
5 November 2020 in IEEE Internet of Things Journal
NRNarendra Singh Raghuwanshi
Narendra Singh Raghuwanshi
In this article, we present the design of an Internet-of-Things (IoT)-based dynamic irrigation scheduling system (AgriSens) for efficient water management of irrigated crop fields. The AgriSens provides real time, automatic, dynamic as well as remote manual irrigation treatment for different growth phases of a crop’s life cycle using IoT. A low-cost water-level sensor is designed to measure the level of water present in a field. We propose an algorithm for automatic dynamic-cum-manual irrigation based on farmer requirements. The AgriSens has a farmer-friendly user interface, which provides field information to the farmers in a multimodal manner—visual display, cell phone, and Web portal. It achieves significant results with respect to different performance metrics, such as data validation, packet delivery ratio, energy consumption, and failure rate in various climatic conditions and with dynamic irrigation treatments. Experimental results show that the AgriSens helps improve the crop productivity by at most 10.21% over the traditional manual irrigation method, expands the network’s lifetime 2.5 times more than the existing system yet achieving a reliability of 94% even after 500 h of operation.
9 November 2016 in IEEE Systems Journal
In this paper, we propose a software-defined wireless sensor network architecture ( Soft-WSN )—an effort to support application-aware service provisioning in Internet of Things (IoT). Detailed architecture of the proposed system is presented involving the application, control, and infrastructure layers to enable software-defined networking (SDN) in IoT. We design a software-defined controller, which includes two management policies—device management and network management. Device management facilitates users to control their devices in the network. To enable device control mechanisms, we investigate three scheduling issues in a sensor node—sensing task, sensing delay, and active sleep. On the other hand, the topology of the network is controlled by the network management policies, which can be modified in run time to deal with dynamic requirements of IoT. Furthermore, the proposed scheme is implemented in a real hardware platform without changing the underlying sensor networking concepts, so that existing sensor devices can be seamlessly integrated. Therefore, in contrast to the existing SDN solutions for WSNs, the proposed system, Soft-WSN , focuses on both device management and topology management to meet run-time application-specific requirements of IoT, while enhancing flexibility and simplicity of WSN management. Experimental results on a real hardware-based test bed indicate that the proposed scheme is beneficial to meet real-time application-specific requirements of IoT, while ensuring significant improvements on network performance over the traditional approaches.
22 December 2020 in IEEE Internet of Things Journal
In this paper, we propose a fog-enabled federated learning framework – FogFL – to facilitate distributed learning for delay-sensitive applications in resource-constrained IoT environments. While Federated Learning (FL) is a popular distributed learning approach, it suffers from communication overheads and high computational requirements. Moreover, global aggregation in FL relies on a centralized server, prone to malicious attacks, resulting in inefficient training models. We address these issues by introducing geospatially placed fog nodes into the FL framework as local aggregators. These fog nodes are responsible for defined demographics, which help share location-based information for applications with similar environments. Further, we formulate a greedy heuristic approach for selecting an optimal fog node for assuming a global aggregator’s role at each round of communication between the edge and cloud, thereby reducing the dependence on the execution at the centralized server. Fog nodes in the FogFL framework reduce communication latency and energy consumption of resource-constrained edge devices without affecting the global model’s convergence rate, thereby increasing the system’s reliability. Extensive deployment and experimental results corroborate that, in addition to a decrease in global aggregation rounds, FogFL reduces energy consumption and communication latency by 92% and 85%, respectively, as compared to state-of-the-art.
24 March 2014 in IEEE Journal of Biomedical and Health Informatics
In critical medical emergency situations, wireless body area network (WBAN) equipped health monitoring systems treat data packets with critical information regarding patients' health in the same way as data packets bearing regular healthcare information. This snag results in a higher average waiting time for the local data processing units (LDPUs) transmitting data packets of higher importance. In this paper, we formulate an algorithm for Priority-based Allocation of Time Slots (PATS) that considers a fitness parameter characterizing the criticality of health data that a packet carries, energy consumption rate for a transmitting LDPU, and other crucial LDPU properties. Based on this fitness parameter, we design the constant model hawk-dove game that ensures prioritizing the LDPUs based on crucial properties. In comparison with the existing works on priority-based wireless transmission, we measure and take into consideration the urgency, seriousness, and criticality associated with an LDPU and, thus, allocate transmission time slots proportionately. We show that the number of transmitting LDPUs in medical emergency situations can be reduced by 25.97%, in comparison with the existing time-division-based techniques.