16 March 2015 in Journal of Materials Chemistry A
Given the fact that traditional cryogenic rectification is highly energy and capital intensive for the purification of xenon, effective selective adsorption of xenon over other noble gases at room temperature using porous materials is a critical and urgent issue. Here, we present a flexible zinc tetrazolate framework ([Zn(mtz)2]), which exhibits a high capture capacity for xenon and selective adsorption of xenon over other noble gases at room temperature. Due to its high adsorption enthalpy for xenon, a suitable pore size that matches well with the xenon atom, as well as the high polarizability of Xe, [Zn(mtz)2] shows breathing behaviour on xenon adsorption, which is confirmed by the experimental adsorption isotherms of xenon and thermodynamic analysis of breathing transition. The isosteric heats of adsorption and S(DIH) calculations indicate that [Zn(mtz)2] has significantly higher adsorption affinity and capacity for Xe compared with Kr, Ar and N2. The high capture capacity of Xe (2.7 mmol g−1) in an idealized PSA process and high Xe/Kr selectivity (15.5) from breakthrough experiment promise the potential application of [Zn(mtz)2] in Xe capture and separation from Xe–Kr gas mixtures.
25 July 2016 in Dalton Transactions
An aminopyrimidine-functionalized cage-based metal–organic framework has been synthesized, which exhibited exceptionally high C2H2 and CO2 uptake as well as impressive adsorption selectivities towards C2H2 and CO2 over CH4.
21 June 2018 in Journal of Materials Chemistry A
Xenon/krypton (Xe/Kr) separation is of industrial importance. Environmental concerns exist for pure noble-gas production and the reprocessing of noble-gas radioisotopes from used nuclear fuel. Cryogenic distillation as the main technology for Xe/Kr separation is energy and capital intensive. Thus, the development of a more economical and energy-efficient alternative, such as adsorptive separation based on solid porous materials, is urgent and significant. Herein, we prepared metal–organic-framework derived nanoporous carbons as new promising porous materials for highly selective Xe/Kr separation. A series of metal–organic-framework (MOF) derived nanoporous carbons (Z11CB-700, Z11CB-800, Z11CB-900, Z11CB-1000, Z11CB-1100, Z11CBF-1000-1, Z11CBF-1000-2 and Z11CBF-1000-3) were synthesized with ZIF-11 ([Zn(bIM)2], HbIM = benziminazole) as a precursor and furfuryl alcohol as an optional carbon source. A systematic investigation of the Xe/Kr separation was performed on these nanoporous carbons, and they were compared with commercial activated carbon. Z11CBF-1000-2 shows significantly high Xe Henry coefficient (80.01 mmol g−1 bar−1) and high thermodynamic Xe/Kr selectivity (19.7) at very low partial pressures relevant to nuclear-fuel reprocessing. Single-column breakthrough experiments indicate that the Z11CBF-1000-2 exhibits benchmark Xe capacity (20.6 mmol kg−1) under dynamic dilute conditions, which implies its promising potential to capture and separate Xe in used nuclear-fuel reprocessing facilities.
17 November 2020 in Crystal Growth & Design
21 March 2023 in ACS Applied Materials & Interfaces
4 December 2017 in RSC Advances
Ion-exchanged Co 2+ -CPM-6 exhibits a distinctly higher Xe/Kr separating ability than organic cation analogues, suggesting a promising candidate material for Xe/Kr separation.