The environmental impact of polystyrene and other petrochemical packaging has increased interest in researching biodegradable materials as alternatives. The main objective of this research was to develop biodegradable trays from five formulations of Poraqueiba sericea Tulasne (known as umari) seed starch and corn cob meal. The trays were produced using the thermoforming process applying temperatures of 135°C and 145°C for each side of the tray for a time of 6.5 min. Physical analysis of the trays showed that the increase in the percentage of corn cob flour caused changes in color (L*: 68.69 - 64.94), thickness (2.20 - 3.17 mm), density (0.251 - 0.414 g/cm3), moisture (3.85 - 5.68%), water absorption (21.86 - 39.05%), volatile solids (95.33 - 98.31%). Regarding mechanical properties, it was also evidenced the increase in hardness (67.70 - 90.97 N), fracturability (1.43 and 3.19 mm), tension (2.84 to 3.43 MPa) and elongation (1.54 to 2.04%). The formulation of 87.5% umari seed starch and 12.5% tusa flour presented more favorable physical and mechanical properties. Further analysis of this formulation was performed by Fourier transform infrared spectroscopy (FTIR), which identified bands characteristic of starch (1055 and 1027 cm-1); X-ray diffraction (XRD), which revealed characteristic peaks (2θ = 16.83° and 2θ = 22.69°) associated with cellulose crystallinity in the biodegradable tray; and scanning electron microscopy (SEM), which revealed cellulosic voids with irregular distribution due to the addition of fibers. Future research should examine the potential applications of these biodegradable trays for the packaging of raw materials in the food industry.
1 July 2025 in Journal of Scientific and Technological Research Industrial
The objective of this research was to optimize the formulation of biodegradable trays made from residual potato starch (Solanum tuberosum) and passion fruit residue flour (Passiflora edulis) using thermoforming. The study, with a hypothetical-deductive approach, basic design, cross-sectional scope, and explanatory level, applied a mixture design methodology with 15 experimental runs. The sample consisted of 5 kg of potato starch and 5 kg of passion fruit flour. Statistical analysis was performed with Design Expert 13 using ANOVA and numerical optimization, while graphical representation was carried out with Statistica 10. The results indicated an optimal formulation composed of 45.1% starch, 5.3% passion fruit flour, and 49.7% water, achieving high hardness, low fracturability, and adequate physical properties. Quadratic and linear models showed high reliability (R² > 0.90). It is concluded that the combination of residual potato starch and passion fruit flour allows the production of biodegradable trays with satisfactory mechanical and functional properties, representing a viable and sustainable alternative to conventional plastic packaging.