Thomas Franke

Thomas Franke

Auto-generated profile, based on publicly available information

Thomas Franke

EUROfusion Consortium, Garching, Germany

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2017 in Fusion Engineering and Design
Verified
Journal Article
Open access
JJJohn Jelonnek
John Jelonnek
Gaetano AielloGaetano Aiello
Gaetano Aiello
SAS. Alberti
S. Alberti
KAK. Avramidis
K. Avramidis
FBF. Braunmueller
F. Braunmueller
MTMinh Tran
Minh Tran

12 April 2023 in Sensors
Verified
Journal Article
Open access
PDF file
Bruno GoncalvesBruno Goncalves
Bruno Goncalves
PVPaulo Varela
Paulo Varela
ASAntonio Guilherme Slva
Antonio Guilherme Slva
FSFilipe da Silva
Filipe da Silva
JSJorge Manuel Santos
Jorge Manuel Santos
ODOcleto D’arcangelo
Ocleto D’arcangelo
Providing energy from fusion and finding ways to scale up the fusion process to commercial proportions in an efficient, economical, and environmentally benign way is one of the grand challenges for engineering. Controlling the burning plasma in real-time is one of the critical issues that need to be addressed. Plasma Position Reflectometry (PPR) is expected to have an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma continuously, complementing magnetic diagnostics. The reflectometry diagnostic uses radar science methods in the microwave and millimetre wave frequency ranges and is envisaged to measure the radial edge density profile at several poloidal angles providing data for the feedback control of the plasma position and shape. While significant steps have already been given to accomplish that goal, with proof of concept tested first in ASDEX-Upgrade and afterward in COMPASS, important, ground-breaking work is still ongoing. The Divertor Test Tokamak (DTT) facility presents itself as the appropriate future fusion device to implement, develop, and test a PPR system, thus contributing to building a knowledge database in plasma position reflectometry required for its application in DEMO. At DEMO, the PPR diagnostic’s in-vessel antennas and waveguides, as well as the magnetic diagnostics, may be exposed to neutron irradiation fluences 5 to 50 times greater than those experienced by ITER. In the event of failure of either the magnetic or microwave diagnostics, the equilibrium control of the DEMO plasma may be jeopardized. It is, therefore, imperative to ensure that these systems are designed in such a way that they can be replaced if necessary. To perform reflectometry measurements at the 16 envisaged poloidal locations in DEMO, plasma-facing antennas and waveguides are needed to route the microwaves between the plasma through the DEMO upper ports (UPs) to the diagnostic hall. The main integration approach for this diagnostic is to incorporate these groups of antennas and waveguides into a diagnostics slim cassette (DSC), which is a dedicated complete poloidal segment specifically designed to be integrated with the water-cooled lithium lead (WCLL) breeding blanket system. This contribution presents the multiple engineering and physics challenges addressed while designing reflectometry diagnostics using radio science techniques. Namely, short-range dedicated radars for plasma position and shape control in future fusion experiments, the advances enabled by the designs for ITER and DEMO, and the future perspectives. One key development is in electronics, aiming at an advanced compact coherent fast frequency sweeping RF back-end [23–100 GHz in few μs] that is being developed at IPFN-IST using commercial Monolithic Microwave Integrated Circuits (MMIC). The compactness of this back-end design is crucial for the successful integration of many measurement channels in the reduced space available in future fusion machines. Prototype tests of these devices are foreseen to be performed in current nuclear fusion machines.

27 December 2017 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
AMArtur J. L. Malaquias
Artur J. L. Malaquias
ASAntonio Guilherme Slva
Antonio Guilherme Slva
RMR. Moutinho
R. Moutinho
RLRaul Luís
Raul Luís
ALA. Lopes
A. Lopes
TFT. Franke
T. Franke
This paper presents the initial conceptual study of integration of reflectometry antennas and waveguides (WGs) in DEMO. The antennas are located at several poloidal angular positions covering a full poloidal section of the helium-cooled lithium lead breading blanket. The concept of slim cassette (SC) is presented which allows for possible side attachment to the blanket sector and offers compatibility with remote handling (RH) operations. The proposed concepts for WGs sectors relative motion decoupling, vacuum boundary breaking, and RH are presented. Monte Carlo neutronic simulations have been done in order to evaluate the heat loads and shielding capabilities of the system. The first results indicate that the cooling for the EUROFER diagnostic components (antennas and WGs) can in principle be provided by the blanket cooling services (He is considered) via connection to the main back supporting structure and routed via the main diagnostic structure body. The first results on the SC thermal analysis indicate that for the first wall (FW), an increase of He speed is required (or a higher cooling volume) as temperatures are above blanket FW temperature. As for the inner components (shielding and wave guides), the cooling requires localized optimization (hot spots in module corners and front antennas) but respects average temperature limit requirements.

1 September 2019 in Fusion Engineering and Design
Verified
Journal Article
Open access
TFThomas Franke
Thomas Franke
PAPiero Agostinetti
Piero Agostinetti
CBChristian Bachmann
Christian Bachmann
ABAlessandro Bruschi
Alessandro Bruschi
MCMatthew Carr
Matthew Carr
SZShanliang Zheng
Shanliang Zheng

22 June 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
Gaetano AielloGaetano Aiello
Gaetano Aiello
KAKonstantinos A. Avramidis
Konstantinos A. Avramidis
TFThomas Franke
Thomas Franke
GGGerd Gantenbein
Gerd Gantenbein
JJJohn Jelonnek
John Jelonnek
EWEckhard Woerner
Eckhard Woerner
An electron cyclotron system (ECS) is required in the European DEMO fusion reactor for plasma heating, magnetohydrodynamic control, especially the suppression of neoclassical tearing modes (NTMs), and thermal instability control. Microwave beams of 2 MW, generated by gyrotrons, shall propagate through corrugated HE₁₁ waveguides (WGs) of 63.5-mm inner diameter and finally reach specific locations in the plasma by a dedicated set of mirrors. The deployment of the beam may be done either by angular steering, i.e., tilting moveable mirrors, or by frequency steering, i.e., tuning the gyrotron frequency. In the last option, for long pulse operations, broadband optical grade diamond windows are required as confinement and/or vacuum barriers both at the torus and the gyrotron side. The Brewster-angle window represents a promising solution due to its intrinsic simplicity. However, the WG aperture imposes a minimum Ø180 mm for the disk at the Brewster-angle of 67.2° for diamond. This is an ambitious target, considering 140 mm as the state of the art. First, this article shows the very promising results of diamond growth experiments carried out by Diamond Materials GmbH with the first worldwide free-standing optical grade Ø180-mm disk having an average unpolished thickness of 1.3 mm. For the first time, one side of this large disk was polished and loss tangent measurements were performed at the center and over a large area. Then, the performance of the window featuring these large disks was characterized by a consistent set of thermomechanical analyses in view of the forthcoming window prototyping activity.

9 March 2018 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
TFT. Franke
T. Franke
PAP. Agostinetti
P. Agostinetti
Gaetano AielloGaetano Aiello
Gaetano Aiello
KAK. Avramidis
K. Avramidis
CBCh. Bachmann
Ch. Bachmann
SZS. Zheng
S. Zheng
Heating and current drive (H&CD) systems are being investigated for a demonstration fusion power plant DEMO to deliver net electricity for the grid around 2050. Compared to ITER, which has to show the generation of 500-MW thermal power, the target of DEMO is the successful production of 300 to 500 MW electrical power to the grid and to aim for a self-sufficient tritium fuel cycle. Three H&CD systems are under development for DEMO in Europe, the electron cyclotron (EC) system, the neutral beam injection (NBI) system, and the ion cyclotron system. Based on present studies for plasma ramp-up, ramp-down, and flat top phases, to be further validated in more detailed simulations, the assumed total launched power needed from the H&CD system in DEMO is in the range of 50-100 MW, to be provided for plasma heating and control. This paper describes the design and Research and Development status of selected H&CD systems, considered for their deployment in the EU DEMO. It was always considered that different H&CD configurations and design variants will have an impact on the performances for the whole fusion plant. It shall be noted that the basis for the H&CD integrated design and system development is the actual version of the European fusion electricity roadmap. The project also elaborates on H&CD efficiency improvements which will reduce the recirculating power fraction in the future fusion power plants. Different studies under investigation will be discussed such as for NBI the photoneutralization and for EC novel concepts for gyrotron multistage-depressed collector.