Wei Huang

Wei Huang

Auto-generated profile, based on publicly available information

Wei Huang

College of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an, China

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
WHWei Huang
Wei Huang
XMXiang Ma
Xiang Ma
BLBin Luo
Bin Luo
ZLZeliang Li
Zeliang Li
YSYujiao Sun
Yujiao Sun
To develop new slabs with light weight and high rigidity as well as meet the requirements of use and facilitate construction, a large‐span multi‐ribbed composite slab (R‐CS) with filled lightweight blocks is proposed based on systematic research. Static tests of the bending behaviour of the four pieces of the R‐CS specimens and one ordinary concrete cast‐in‐place slab were carried out. The fracture distribution, bearing capacity, deflection, and load‐strain curves of the tensile steel bars were analysed. The difference in the bending behaviour between the R‐CS specimens and the cast‐in‐place slab and the influence of different structural forms on the bending behaviour of the R‐CS samples were studied. By calculating the bearing capacity of the fully composite state, their composite performance was evaluated. The research shows that the bending failure process of the R‐CS specimens is similar to that of the cast‐in‐place slab and the crack and deflection development as well as ductility are relatively good. The measured bearing capacity of the specimen can reach more than 70% of the theoretical calculation strength under the fully composite state. The composite performance is satisfactory.

1 January 2022 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
PGPei Ge
Pei Ge
WHWei Huang
Wei Huang
HZHao Zhang
Hao Zhang
WQWenli Quan
Wenli Quan
YGYuting Guo
Yuting Guo
It has been proved that the compressive strength of water saturated concrete is lower than that of air dry concrete. Due to the water absorption of recycled aggregate (RA) is noticeably higher than that of natural aggregate (NA), the mechanical properties of water saturated recycled aggregate concrete (RAC) are quite different from those of water saturated natural aggregate concrete (NAC). At the same time, the calculation of concrete compressive strength is the first step of concrete mix proportion design. Therefore, it is essential to investigate the compressive strength of RAC in water saturated state. In this study, firstly, the water content and effective water absorption of NA, recycled brick aggregate (RBA) and recycled concrete aggregate (RCA), as well as the water content and effective water absorption of concrete specimen were tested; secondly, the effects of water/cement ratio, water saturation and coarse aggregate types on the compressive strength of water saturated concrete were studied; finally, the calculation model for compressive strength of water saturated concrete was proposed. The test results show that: Within 120 hours, the maximum effective water absorption of NA, RCA and RBA is 0.32%, 0.61% and 8.18%, respectively. Within 240 hour, the maximum effective water absorption of NAC, recycled concrete aggregate concrete (RCAC) and recycled brick aggregate concrete (RBAC) is 0.73%, 0.81% and 1.89%, respectively. In air dry and water saturated state, the descending order of compressive strength of concrete is: NAC > RCAC > RBAC. The average relative error of the calculation model for compressive strength of water saturated concrete is 7.1%. In the calculation model, water/cement ratio, effective water absorption, water saturation and coarse aggregate types are considered. The results of this study have great significance for the mix proportion design of water saturated concrete.

28 June 2018 in Advances in Structural Engineering
Verified
Journal Article
Open access
Bin LiBin Li
Bin Li
WHWei Huang
Wei Huang
BLBin Luo
Bin Luo
GCGuoxin Chen
Guoxin Chen
This article aims at experimentally investigating a cycle behaviour of a new lateral force-resisting structural system, that is, precast composite walls with ecological filled blocks. For this purpose, a total of five low cyclic loading tests were conducted for the 1:2-scaled precast composite wall specimens with five different kinds of ecological filled blocks, namely, the wheat straw fibre raw soil–based block, the recycled expanded polystyrene lightweight concrete block, the wheat straw fibre cement–based block, the autoclaved aerated concrete block and the cotton straw block. In the test, the failure patterns, hysteretic loops, characteristic points, skeleton curves, ductility and relative deformation, stiffness degradation and energy dissipation capacity of the tested specimens were obtained and further analysed. The test results show that (1) the failure modes and mechanisms of the tested specimens are primarily affected by the strength of the filled blocks and the connection performance of the concrete ribbed grids; (2) the filled blocks, ribbed grids and the concealed frame can work cooperatively and interact and they play roles in the three stages of elastic, elastic–plastic, and ultimate destruction in turn; (3) the compressive strength, crack resistance, modulus of elasticity of filled blocks and bonding capacity with the ribbed grids are the main factors affecting the characteristic point, displacement ductility, stiffness degradation and other seismic performance index of the precast composite wall; (4) the five wall specimens have different energy dissipation capacities with the increase of displacement and also have the strong ability to resist collapse, which reflect the precast composite walls’ good behaviour in terms of earthquake resistance.