Hermann Schumacher

Hermann Schumacher

Auto-generated profile, based on publicly available information

Hermann Schumacher

Ulm University

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 December 2017 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
FTFilipe Tabarani
Filipe Tabarani
LBLuigi Boccia
Luigi Boccia
TPTatyana Purtova
Tatyana Purtova
ASAlireza Shamsafar
Alireza Shamsafar
HSHermann Schumacher
Hermann Schumacher
GAGiandomenico Amendola
Giandomenico Amendola
The first millimeter-wave system-on-chip for dual-band phased array applications is presented as a proof of concept for K-/Ka-band (20/30 GHz) satellite communication on-the-move applications. Each chip includes four transmit (Tx) and two receive (Rx) channels working at Kaand K-band, respectively. The proposed architecture enables a half-duplex operating mode in two different bands. Its development was driven taking into account the integration into a realistic Tx/Rx shared aperture phased array architecture. Full amplitude and phase control are provided for each channel with high granularity (65536 states). The measured results demonstrate the validity of the proposed chip architecture, even though the channel output power and the noise figure (NF) are not in full agreement with the simulations. In Tx mode, the channel provides 9.47 dB of gain with 4.19-dBm output power at 1-dB compression. In Rx mode, the channel gain is 21.6 dB with an NF of 5 dB. In a scenario with 5.265° phase steps and 8-dB amplitude tapering capability, the amplitude and phase root-mean-square (RMS) errors within the Tx bandwidth (29.5-30.8 GHz) are equal to 0.52 dB and 3.74°, respectively. The amplitude and phase RMS errors in the Rx bandwidth (19.7-21 GHz) are equal to 2.05 dB and 12.11°, respectively. The chip consumes 340 mW in Tx and 242 mW in Rx mode and occupies 3.3 × 3.5 mm 2 .

13 February 2020 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
FTFilipe Tabarani
Filipe Tabarani
LBLuigi Boccia
Luigi Boccia
DCDomenico Calzona
Domenico Calzona
GAGiandomenico Amendola
Giandomenico Amendola
HSHermann Schumacher
Hermann Schumacher
This study presents the first monolithically integrated full‐duplex front‐end for K/Ka satellite communication phased arrays. A 0.25 μm SiGe:C BiCMOS process was used to develop the integrated circuit. The receive and transmit channels are united into a common port through a novel duplexer. For each RF channel, the bias currents, the active channels and the power amplifier operation mode can be controlled through a serial bus. Amplitude and phase control are provided with fine granularity (65,536 states). In transmit mode, each channel provides 37.3 dB of gain with 12.9 dBm output power at 1‐dB compression. In receive mode, 33.7 dB gain is measured with a noise figure of 3.2 dB. The amplitude/phase root‐mean‐square errors within the transmit (29.5–30.8 GHz) and receive (19.7–21 GHz) bands are below 0.7 dB/ and 0.26 dB/ , respectively. The chip occupies and it consumes 81 and 15.5 mW per transmit and receive channels, respectively. The use of a Doherty power amplifier with a novel dynamic adaptive bias circuit led to a 31% reduction of the total dc array power consumption.

1 September 2008
Verified
Conference Paper
Closed access
BSBernd Schleicher
Bernd Schleicher
JDJochen Dederer
Jochen Dederer
MLMario Leib
Mario Leib
INIsmail Nasr
Ismail Nasr
ATAndreas Trasser
Andreas Trasser
HSHermann Schumacher
Hermann Schumacher
In this paper the hybrid integration of an FCC-compliant fifth-order Gaussian derivative impulse generator IC together with a compact ultra-wideband Vivaldi antenna is presented. The setup results in a compact FCC-compliant impulse UWB transmitter. Measurements of the impulse shape in time and spectral domain are shown. With this transmitter a movement detection and the precise measurement of the movement deviation value by a correlation measurement technique is presented. This shows the ability of the UWB radar system to operate as a movement detection sensor. The measurements include a breath rate measurement of a human being.

1 June 2013
Verified
Conference Paper
Closed access
AUA. Cagri Ulusoy
A. Cagri Ulusoy
MKMehmet Kaynak
Mehmet Kaynak
VVVaclav Valenta
Vaclav Valenta
BTBernd Tillack
Bernd Tillack
HSHermann Schumacher
Hermann Schumacher
In this paper, the authors present a monolithically integrated W-band low-noise-amplifier realized in an 0.13μm SiGe BiCMOS technology. The design utilizes a two-stage cascode topology, with inductive emitter degeneration for simultaneous noise and power matching. The paper identifies critical design parameters, and presents careful modeling results. Measurement results show excellent agreement with the simulations, and the circuit achieves 20 dB gain and 4 dB noise figure up to 110 GHz. To the authors' knowledge, this demonstrates the best noise performance up to date on a silicon platform in this frequency range.

1 January 2009 in Frequenz
Verified
Journal Article
Closed access
PDF file
MLMario Leib
Mario Leib
ESEva Schmitt
Eva Schmitt
AGArnold Gronau
Arnold Gronau
JDJochen Dederer
Jochen Dederer
BSBernd Schleicher
Bernd Schleicher
WMWolfgang Menzel
Wolfgang Menzel

1 September 2012
Verified
Conference Paper
Closed access
MKMehmet Kaynak
Mehmet Kaynak
VVVaclav Valenta
Vaclav Valenta
HSHermann Schumacher
Hermann Schumacher
BTBernd Tillack
Bernd Tillack
The introduction of radio frequency micro-electro-mechanical systems (RFMEMS) as a monolithic option into state-of-the-art Si/SiGe BiCMOS foundry processes has paved the way for single chip radio frequency microsystems at millimeter wave frequencies. Deep silicon substrate etch techniques have also been developed to prevent high substrate losses which help in achieving high performance passive components at mm-wave frequencies. Using the same process techniques, realization of highly efficient on-chip antennas has become feasible, which in the millimeter-wave range no longer come with a hefty chip real estate penalty. In this paper, the current status of embedded BiCMOS+MEMS technology development is presented. Reconfigurable circuits using embedded RFMEMS switches and mm-wave transceivers with on-chip antennas are also discussed as application examples.